25CTQ035STRR - International Rectifier

SCHOTTKY RECTIFIER 30 Amp

25CTQ...

25CTQ...S

25CTQ.. -1

www.irf.com 1

Bulletin PD-20242 rev. B 07/03

IF(AV) Rectangular 30 A

waveform

VRRM range 35 to 45 V

IFSM @ tp = 5 µs sine 990 A

VF@ 15 Apk, TJ=125°C 0.50 V

(per leg)

TJrange - 55 to 150 °C

Characteristics 25CTQ Units

Major Ratings and Characteristics Description/ Features

The 25CTQ center tap Schottky rectifier series has been

optimized for very low forward voltage drop, with moderate

leakage. The proprietary barrier technology allows for

reliable operation up to 150° C junction temperature. Typical

applications are in switching power supplies, converters,

free-wheeling diodes, and reverse battery protection.

150° C TJ operation

Center tap TO-220 package

High purity, high temperature epoxy encapsulation for

enhanced mechanical strength and moisture resistance

Very low forward voltage drop

High frequency operation

Guard ring for enhanced ruggedness and long term

reliability

IF(AV) = 30Amp

VR = 35 to 45V

Case Styles

25CTQ... 25CTQ... S 25CTQ... -1

TO-220 D2PAK

Anode

Base

Common

Cathode

node

Common

Cathode

TO-262

Anode

Base

Common

Cathode

node

Common

Cathode

Anode

Base

Common

Cathode

node

Common

Cathode

25CTQ... Series

Bulletin PD-20242 rev. B 07/03

www.irf.com

IF(AV) Max. Average Forward Current 30 A 50% duty cycle @ TC = 102 °C, rectangular wave form

* See Fig. 5

IFSM Max. Peak One Cycle Non-Repetitive 990 5µs Sine or 3µs Rect. pulse

Surge Current (Per Leg) * See Fig. 7 250 10ms Sine or 6ms Rect. pulse

EAS Non-Repetitive Avalanche Energy 20 mJ TJ = 25 °C, IAS

= 3 Amps, L = 4.40 mH

(Per Leg)

IAR Repetitive Avalanche Current 3 A Current decaying linearly to zero in 1 µsec

(Per Leg) Frequency limited by TJ max. VA = 1.5 x VR typical

Part number 25CTQ035 25CTQ040 25CTQ045

VRMax. DC Reverse Voltage (V)

VRWM Max. Working Peak Reverse Voltage (V) 35 40 45

TJMax. Junction Temperature Range -55 to 150 °C

Tstg Max. Storage Temperature Range -55 to 150 °C

RthJC Max. Thermal Resistance Junction 3.25 °C/W DC operation * See Fig. 4

to Case (Per Leg)

RthJC Max. Thermal Resistance Junction 1.63 °C/W DC operation

to Case (Per Package)

RthCS Typical Thermal Resistance, Case 0.50 °C/W Mounting surface , smooth and greased

to Heatsink

wt Approximate Weight 2.0 (0.07) g (oz.)

T Mounting Torque Min. 6 (5)

Max. 12 (10)

Thermal-Mechanical Specifications

Kg-cm

(Ibf-in)

Absolute Maximum Ratings

VFM Max. Forward Voltage Drop 0.56 V @ 15A

(Per Leg) * See Fig. 1 (1) 0.71 V @ 30A

0.50 V @ 15A

0.64 V @ 30A

IRM Max. Reverse Leakage Current 1.75 mA TJ = 25 °C

(Per Leg) * See Fig. 2 (1) 70 mA TJ = 125 °C

CTMax. Junction Capacitance(Per Leg) 900 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C

LSTypical Series Inductance (Per Leg) 8.0 nH Measured lead to lead 5mm from package body

dv/dt Max. Voltage Rate of Change 10000 V/ µs

(Rated VR)

TJ = 25 °C

TJ = 125 °C

VR = rated VR

(1) Pulse Width < 300µs, Duty Cycle <2%

Voltage Ratings

Parameters 25CTQ Units Conditions

Electrical Specifications

AFollowing any rated

load condition and with

rated VRRM applied

25CTQ... Series

Bulletin PD-20242 rev. B 07/03

www.irf.com

Fig. 2 - Typical Values Of Reverse Current

Vs. Reverse Voltage (Per Leg)

Fig. 3 - Typical Junction Capacitance

Vs. Reverse Voltage (Per Leg)

Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)

Fig. 1 - Max. Forward Voltage Drop Characteristics

(Per Leg)

100

1000

0.2.4.6.811.21.41.61.82

Inst antaneous Forward Current - I (A)

Forward Vol tage Drop - V (V)

T = 150°C

T = 125°C

T = 25°C

.001

.01

100

1000

0 5 10 15 20 25 30 35 40 45

125°C

100°C

75°C

50°C

25°C

Reverse Volt age - V (V)

Reverse Current - I (mA)

T = 150°C

100

1000

0 1020304050

T = 25°C

Reverse Voltage - V (V)

Juncti on Capacitance - C (pF)

.001

.01

.00001 .0001 .001 .01 .1 1 10 100

D = 0.33

D = 0.50

D = 0.25

D = 0. 17

D = 0.08

thJC

t , Rect angular Pulse Duration (Seconds)

Thermal Impedance - Z (°C/W)

Singl e Pul se

(Thermal Resistance)

Not es:

1. Duty factor D = t / t

2. Peak T = P x Z + T

JDMthJCC

25CTQ... Series

Bulletin PD-20242 rev. B 07/03

www.irf.com

Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)

Fig. 5 - Max. Allowable Case Temperature

Vs. Average Forward Current (Per Leg)

Fig. 8 - Unclamped Inductive Test Circuit

Fig. 6 - Forward Power Loss Characteristics

(Per Leg)

100

110

120

130

140

150

160

0 5 10 15 20 2

Allowable Case Temperature - (°C)

Average Forward Current - I (A)

F(AV)

25CTQ

R (DC) = 3. 25°C/W

thJC

0 2 4 6 8 10 12 14 16 18 20 22

Average Power Loss - (Watt s)

F(AV)

D = 0.08

D = 0.17

D = 0.25

D = 0.33

D = 0.50

RMS Li mit

Average Forward Current - I (A)

100

1000

10 100 1000 10000

FSM

Non-Repetitive Surge Current - I (A)

At Any Rated Load Condition

And With Rated V Applied

Following Surge

RRM

Square Wave Pulse Duration - t (microsec)

FREE- W HEEL

DIODE

40HFL40S02

C URRENT

MONITOR

HI G H- SPEED

SWITCH

IRFP460

DUT

Rg = 25 ohm Vd = 25 Volt

25CTQ... Series

Bulletin PD-20242 rev. B 07/03

www.irf.com

Outline Table

3.78 (0.15)

3.54 (0.14)

10.54 (0.41)

MAX.

DIA.

15.24 (0.60)

14.84 (0.58)

2.92 (0.11)

2.54 (0.10)

TERM 2

14.09 (0.55)

13.47 (0.53)

3.96 (0.16)

3.55 (0.14)

0.94 (0.04)

0.69 (0.03)

4.57 (0.18)

4.32 (0.17)

30.61 (0.02) MAX.

5.08 (0.20) REF.

1.32 (0.05)

1.22 (0.05)

6.48 (0.25)

6.23 (0.24)

2°

0.10 (0.004)

1.40 (0.05)

1.15 (0.04)

2.89 (0.11)

2.64 (0.10)

2.04 (0.080) MAX.

Dimensions in millimeters and (inches)

Conform to JEDEC outline TO-220AB

BASE

COMMON

CATHODE

123

ANODE

COMMON

CATHODE

NODE

10.16 (0.40)

REF.

8.89 (0.35)

4.57 (0.18)

4.32 (0.17)

0.61 (0.02) MAX.

5.08 (0.20) REF.

1.32 (0.05)

1.22 (0.05)

6.47 (0.25)

6.18 (0.24)

93°

REF.

2.61 (0.10)

2.32 (0.09)

5.28 (0.21)

4.78 (0.19)

4.69 (0.18)

4.20 (0.16)

0.55 (0.02)

0.46 (0.02)

14.73 (0.58)

15.49 (0.61)

1.40 (0.055)

1.14 (0.045)

0.93 (0.37)

0.69 (0.27)

11.43 (0.45)

17.78 (0.70)

8.89 (0.35)

3.81 (0.15)

2.08 (0.08)

2.54 (0.10)

MINIMUM RECOMMENDED FOOTPRINT

Dimensions in millimeters and (inches)

Conform to JEDEC outline D2Pak (SMD-220)

BASE

COMMON

CATHODE

123

ANODE

COMMON

CATHODE

NODE

25CTQ... Series

Bulletin PD-20242 rev. B 07/03

www.irf.com

Outline Table

Dimensions in millimeters and (inches)

Modified JEDEC outline TO-262

BASE

COMMON

CATHODE

12 3

ANODE

COMMON

CATHODE

NODE

Marking Information

EXAMPLE: THIS IS A 25CTQ045

LOT CODE 1789

ASSEMBLED ON WW 19, 1998

IN THE ASSEMBLY LINE "C"

INTERNATIONAL

RECTIFIER

LOGO

ASSEMBLY

LOT CODE

PART NUMBER

DATE CODE

YEAR 7 = 1998

WEEK 19

LINE C

25CTQ... Series

Bulletin PD-20242 rev. B 07/03

www.irf.com

Ordering Information Table

Device Code

1 5243

1- Essential Part Number

2- Common Cathode

3- T = TO-220

4- Q = Schottky Q Series

5- Voltage Rating

6-S=D

2Pak

6- -1 = TO-262

25 C T Q 045 -1

035 = 35V

040 = 40V

045 = 45V

TRR

FEED DIRECTION

TRL

FEED DIRECTION

10.90 (0.429)

10.70 (0.421) 16.10 (0.634)

15.90 (0.626)

1.75 (0.069)

1.25 (0.049)

1.85 (0.073)

1.65 (0.065)

4.10 (0.161)

3.90 (0.153)

1.60 ( 0.063)

1.50 ( 0.059)

DIA.

1.60 (0.063)

1.50 (0.059)

DIA.

11.60 (0.457)

11.40 (0.449)

15.42 (0.609)

15.22 (0.601)

4.72 (0.186)

4.52 (0.178)

24.30 (0 .957)

23.90 (0 .941)

0.368 (0.0145)

0.342 (0.0135)

360 (1 4.173)

DIA. MAX.

26.40 (1.039)

24.40 (0.961)

13.50 (0.532)

12.80 (0.504) DIA.

60 (2.362)

DIA. MIN.

SMD-220 Tape & Reel

When ordering, indicate the part

number, part orientation, and the

quantity. Quantities are in multiples

of 800 pieces per reel for both

TRL and T RR.

Dimensions in millimeters and (inches)

Tape & Reel Information

25CTQ... Series

Bulletin PD-20242 rev. B 07/03

www.irf.com

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105

TAC Fax: (310) 252-7309

Visit us at www.irf.com for sales contact information. 07/03

Data and specifications subject to change without notice.

This product has been designed and qualified for Industrial Level.

Qualification Standards can be found on IR's Web site.

25CTQ045

********************************************

* This model has been developed by *

* Wizard SPICE MODEL GENERATOR (1999) *

* (International Rectifier Corporation *

* Contain Proprietary Information *

********************************************

* SPICE Model Diode is composed by a *

* simple diode plus paralled VCG2T *

********************************************

.SUBCKT 25CTQ045 ANO CAT

D1 ANO 1 DMOD (0.07089)

*Define diode model

.MODEL DMOD D(IS=1.72789623043916E-04A,N=1.16449261507669,BV=52V,

+ IBV=0.347382965330896A,RS= 0.000623832,CJO=2.01681525450576E-08,

+ VJ=1.79426113441105,XTI=2, EG=0.778356513713514)

********************************************

*Implementation of VCG2T

VX 1 2 DC 0V

R1 2 CAT TRES 1E-6

.MODEL TRES RES(R=1,TC1=30.866905105089)

GP1 ANO CAT VALUE={-ABS(I(VX))*(EXP((((-2.873853E-03/30.86691)*((V(2,CAT)*1E6)/(I(VX)+1E-6)-

1))+1)*5.486216E-02*ABS(V(ANO,CAT)))-1)}

********************************************

.ENDS 25CTQ045

Thermal Model Subcircuit

.SUBCKT 25CTQ045 5 1

CTHERM1 5 4 4.04E-01

CTHERM2 4 3 2.01E+00

CTHERM3 3 2 8.32E+00

CTHERM4 2 1 3.80E+02

RTHERM1 5 4 1.62E+00

RTHERM2 4 3 1.22E+00

RTHERM1 3 2 3.50E-01

RTHERM1 2 1 4.34E-02

.ENDS 25CTQ045