MSP09A0110K0GDA - Vishay [Dale] - Datasheet.Directory

Document Number: 31510 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com

Revision: 10-Jun-10 1

Thick Film Resistor Networks, Single-In-Line, Molded SIP

MSP

Vishay Dale

FEATURES

•Isolated, bussed and dual terminator

schematics available

•0.195" (4.95 mm) “A” or 0.350" (8.89 mm) “C”

maximum seated height

•Thick film resisitive elements

•

Low temperature coefficient (- 55 °C to + 125 °C)

± 100 ppm/°C

•Rugged, molded case construction

•Reduces total assembly costs

•Compatible with automatic insertion equipment and

reduces PC board space

•Wide resistance range (10 Ω to 2.2 MΩ)

•Available in tube pack or side-by-side pack

•Compliant to RoHS directive 2002/95/EC

Notes

(1) Tighter tracking available

(2) ± 2 % standard, ± 1 % and ± 5 % available

(3) Continuous working voltage shall be or maximum working voltage, whichever is less

* Pb containing terminations are not RoHS compliant, exemptions may apply

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL

MODEL/

SCHEMATIC

PROFILE

POWER RATING

ELEMENT

P70 °C

RESISTANCE

RANGE

TOLERANCE (2)

± %

TEMPERATURE

COEFFICIENT

(- 55 °C to + 125 °C)

± ppm/°C

TCR

TRACKING (1)

(- 55 °C to + 125 °C)

± ppm/°C

MAXIMUM

WORKING

VOLTAGE (3)

VDC

MSPxxx01 A

0.20

0.25 10 to 2.2M 1, 2, 5 100 50 100

MSPxxx03 A

0.30

0.40 10 to 2.2M 1, 2, 5 100 50 100

MSPxxx05 A

0.20

0.25 10 to 2.2M 1, 2, 5 100 150 100

P x R

GLOBAL

MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE

VALUE

TOLERANCE

CODE SPECIAL

MSP A = “A” profile

C = “C” profile

01 = Bussed

03 = Isolated

00 = Special

F = ± 1 %

G = ± 2 %

J = ± 5 %

S = Special

Blank = Standard

(Dash Number)

(Up to 3 digits)

From 1 to 999

as applicable

New Global Part Numbering: MSP06A031K00GDA (preferred part numbering format)

Historical Part Number example: MSP06A03102G (will continue to be accepted)

HISTORICAL

MODEL PIN COUNT SCHEMATIC RESISTANCE

VALUE

MSP06A031K00GDA

PACKAGING

EJ = Lead (Pb)-free,

tube

DA = Tin/lead, tube

GLOBAL PART NUMBER INFORMATION

R = Ω

K = kΩ

M = MΩ

10R0 = 10 Ω

680K = 680 kΩ

1M00 = 1.0 MΩ

06 = 6 pin

08 = 8 pin

09 = 9 pin

10 = 10 pin

PACKAGE

HEIGHT

TOLERANCE

CODE PACKAGING

MSP 06 03 102A G D03

GLOBAL

MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE

VALUE

TOLERANCE

CODE SPECIAL

MSP A = “A” profile

C = “C” profile

05 = Dual

terminator

F = ± 1 %

G = ± 2 %

J = ± 5 %

Blank = Standard

(Dash Number)

(Up to 3 digits)

From 1 to 999

as applicable

New Global Part Numbering: MSP08C05131AGDA (preferred part numbering format)

Historical Part Number example: MSP08C05221331G (will continue to be accepted)

HISTORICAL

MODEL PIN COUNT SCHEMATIC RESISTANCE

VALUE 1

MSP08C05131AGDA

PACKAGING

EJ = Lead (Pb)-free,

tube

DA = Tin/lead, tube

3 digit

impedance

code, followed

by alpha modifier

(see Impedance

Codes table)

06 = 6 pin

08 = 8 pin

09 = 9 pin

10 = 10 pin

PACKAGE

HEIGHT TOLERANCE

MSP 08 05 221C 331 G

PACKAGING

D03

RESISTANCE

VALUE 2

MSP

Vishay Dale Thick Film Resistor Networks, Single-In-Line, Molded SIP

www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31510

2Revision: 10-Jun-10

DIMENSIONS in inches (millimeters)

Max.

D Max.

0.135 + 0.015

- 0.010

(3.43 + 0.381

- 0.254)

C Equal Space

0.016 ± 0.003

(0.406 ± 0.076)

0.100 ± 0.010

(2.54 ± 0.254)

Non-Accumulative

0.040 ± 0.010

(1.02 ± 0.254)

0.015

(0.381)

Min.

Pin #1

0.012 ± 0.003

(0.305 ± 0.076)

0.090 (2.29)

Max.

GLOBAL MODEL A (Max.) B C D (Max.)

MSP06 0.590 (14.99) 0.500 (12.70) 5

MSPxxA = 0.195 (4.95)

MSPxxC = 0.350 (8.89)

MSP080.790 (20.07) 0.700 (17.78) 7

MSP10 0.990 (25.15) 0.900 (22.86) 9

MSP09 0.890 (22.61) 0.800 (20.32) 8 0.195 (4.95) only

TECHNICAL SPECIFICATIONS

PARAMETER UNIT MSP SERIES

Package Power Rating

Maximum at + 25 °C and + 70 °C See Derating Curves

Voltage Coefficient of Resistance Veff < 50 ppm typical

Dielectric Strength VAC 200

Isolation Resistance (03 Schematic) Ω> 100 M

Operating Temperature Range °C - 55 to + 125

Storage Temperature Range °C - 55 to + 150

MECHANICAL SPECIFICATIONS

Marking Resistance to Solvents Permanency testing per MIL-STD-202, Method 215

Solderability Per MIL-STD-202, Method 208E, RMA flux

Body Molded epoxy

Terminals Copper alloy, solder plated

Weight

MSP06A = 0.4 g

MSP08A = 0.5 g

MSP09A = 0.55 g

MSP10A = 0.6 g

MSP06C = 0.7 g

MSP08C = 0.9 g

MSP10C = 1.1 g

IMPEDANCE CODES

CODE R1 (Ω) R2 (Ω)CODE R1 (Ω) R2 (Ω)

500B 82 130 141A 270 270

750B 120 200 181A 330 390

800C 130 210 191A 330 470

990A 160 260 221B 330 680

101C 180 240 281B 560 560

111C 180 270 381B 560 1.2K

121B 180 390 501C 620 2.7K

121C 220 270 102A 1.5K 3.3K

131A 220 330 202B 3K 6.2K

Document Number: 31510 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com

Revision: 10-Jun-10 3

MSP

Thick Film Resistor Networks, Single-In-Line, Molded SIP Vishay Dale

CIRCUIT APPLICATIONS

01 Schematic

5, 7, 8 (1) or 9 resistors with one pin common

The MSPxxx01 circuit contains 5, 7, 8 (1) or 9 nominally equal

resistors, each connected between a common pin (pin no. 1) and a

discrete PC board pin. Commonly used in the following applications:

• "Wired OR" Pull-up • MOS/ROM Pull-up/Pull-down

• Power Gate Pull-up • Open Collector Pull-up

• TTL Input Pull-down • TTL Unused Gate Pull-up

Note

(1) Available in “A” Profile only

Standard E-24 resistance values stocked. Consult factory.

03 Schematic

3, 4 or 5 isolated resistors

The MSPxxx03 circuit contains 3, 4 or 5 resistors of nominally equal

value in a compact package. Each resistor is connected to two

discrete PC pins.

Standard E-24 resistance values stocked. Consult factory.

05 Schematic

Pulse squaring and TTL dual-line terminators

The MSPxxx05 circuits contain 4, 6, 7 (2) or 8 series pair of resistors.

Each series pair is connected between two common lines. The

junction of these resistor pairs is connected to the input terminals.

The 05 circuits are designed for TTL dual-line termination and pulse

squaring.

Note

(2) Available in “A” Profile only

Many dual terminator resistance values stocked. Consult factory.

1 2 3 n-1 n

1 2 3 4 n-1 n

1 2 3 n-1 n

MSP

Vishay Dale Thick Film Resistor Networks, Single-In-Line, Molded SIP

www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31510

4Revision: 10-Jun-10

Note

• Higher power ratings available. Contact factory.

Single Resistor

01 and 05

0.30

- 50 + 25 + 70 + 125 + 150

DeratingAmbient Temperature °C

Power Rating (Watts)

0.45

1.15

1.50

1.90

MSP06A Package

MSP08A Package

MSP10A Package

“A” Profile

Single Resistor

01 and 05

0.38

- 50 + 25 + 70 + 125 + 150

DeratingAmbient Temperature C

Power Rating (Watts)

0.60

1.50

2.00

2.50

MSP06C Package

MSP08C Package

MSP10C Package

“C” Profile

3.00

“A” PROFILE + 70 °C PACKAGE RATINGS

MSP10A 1.25 W

MSP09A 1.12 W

MSP08A 1.00 W

MSP06A 0.75 W

“C” PROFILE + 70 °C PACKAGE RATINGS

MSP10C 1.60 W

MSP08C 1.30 W

MSP06C 1.00 W

PERFORMANCE

TEST CONDITIONS MAX. ΔR (TYPICAL TEST LOTS)

Power Conditioning 1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF”

for 100 h ± 4 h at + 25 °C ambient temperature ± 0.50 % ΔR

Thermal Shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR

Short Time Overload 2.5 x rated working voltage 5 s ± 0.25 % ΔR

Low Temperature Operation 45 min at full rated working voltage at - 65 °C ± 0.25 % ΔR

Moisture Resistance 240 h with humidity ranging from 80 % RH to 98 % RH ± 0.50 % ΔR

Resistance to Soldering Heat Leads immersed in + 260 °C solder to within 1/16" of device body

for 10 s ± 0.25 % ΔR

Shock Total of 18 shocks at 100 g's ± 0.25 % ΔR

Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz ± 0.25 % ΔR

Load Life 1000 h at + 70 °C, rated power applied 1.5 h “ON”, 0.5 h

“OFF” for full 1000 h period. Derated according to the curve. ± 1.00 % ΔR

Terminal Strength 4.5 pound pull for 30 s ± 0.25 % ΔR

Insulation Resistance 10 000 MΩ (minimum) -

Dielectric Withstanding Voltage - -

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.