CH www.vishay.com Vishay Sfernice High Frequency 50 GHz Thin Film Chip Resistor FEATURES * Operating frequency 50 GHz * Thin film microwave resistors * Flip chip, wraparound or one face termination * Small size, down to 20 mils by 16 mils * Edged trimmed block resistors * Pure alumina substrate (99.5 %) DESIGN SUPPORT TOOLS * Ohmic range: 10R to 500R click logo to get started * Design kits available * Small internal reactance (LC down to 1 x 10-24) Models Available Those miniaturized components are designed in such a way that their internal reactance is very small. When correctly mounted and utilized, they function as almost pure resistors on a very large range of frequency, up to 50 GHz. * Tolerance 1 %, 2 %, 5 %, 10 % * TCR: 100 ppm/C in (-55 C, +155 C) temperature range * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE CH02016 CH0402 CH0603 02016 0402 0603 RESISTANCE RANGE 10 to 500 10 to 500 10 to 500 RATED POWER Pn W 0.030 0.050 0.125 LIMITING ELEMENT VOLTAGE V 30 37 50 TOLERANCE % 2, 5, 10 1, 2, 5, 10 1. 2, 5, 10 TEMPERATURE COEFFICIENT ppm/C 100 100 100 DIMENSIONS in millimeters (inches) CH02016 F / CH02016 P / CH0402 P / CH0603 P CASE SIZE MODEL / TERMINATION CH02016 F CH02016 P CH0402 F CH0402 N CH0402 G CH0402 N / CH0402 G / CH0603 N / CH0603 G CH0402 F / CH0603 F DIMENSIONS D C F E when applicable 0.127 ( 0.005) 0.050 ( 0.002) MIN. MAX. 0.110 0.150 0.260 (0.010) 0.420 (0.016) (1) (0.004) (0.006) A 0.10 ( 0.004) B 0.10 ( 0.004) G 0.050 ( 0.002) 0.480 (0.020) 0.390 (0.016) 1.000 (0.040) 0.600 (0.023) 0.500 (0.020) 0.150 (0.006) 0.350 (0.014) n/a n/a CH0402 P 1.200 (0.047) 0.600 (0.023) 0.500 (0.020) 0.110 (0.004) 0.150 (0.006) 0.320 (0.013) 0.880 (0.035) CH0603 F CH0603 N CH0603 G 1.520 (0.060) 0.750 (0.030) 0.500 (0.020) 0.250 (0.010) 0.510 (0.020) n/a n/a CH0603 P 1.720 (0.068) 0.750 (0.030) 0.500 (0.020) 0.235 (0.009) 0.275 (0.011) 0.660 (0.026) 1.355 (0.053) 0.300 (0.012) Note (1) 0.070 ( 0.003) Revision: 08-Feb-18 Document Number: 53014 1 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CH www.vishay.com Vishay Sfernice TOLERANCE VS. OHMIC VALUES Ohmic range 10 R < 50 50 R < 100 100 R 500 5 %, 10 % 2 %, 5 %, 10 % 1 %, 2 %, 5 %, 10 % (1) Tolerance Note (1) 1 % tolerance not applicable for case 02016 LAND PATTERN FOR F 'FLIP CHIP' TERMINATIONS in millimeters (inches) Gmin. Xmax. Zmax. CHIP SIZE Zmax. Xmax. Gmin. 02016 0.53 (0.021) 0.44 (0.017) 0.15 (0.006) 0402 1.40 (0.055) 0.65 (0.026) 0.40 (0.016) 0603 1.71 (0.067) 0.90 (0.035) 0.76 (0.030) Note * Suggested land pattern: According to IPC-7351 LAND PATTERN FOR N AND G WRAPAROUND TERMINATIONS in millimeters (inches) X m ax . Gmin. Zmax. CHIP SIZE Zmax. Gmin. Xmax. 0402 1.55 (0.061) 0.15 (0.006) 0.73 (0.029) 0603 2.37 (0.093) 0.35 (0.014) 0.98 (0.039) Dimension and tolerance of land pattern shall be defined by PCB designer; PCB can be designed according to IPC-7351A "Generic Requirements for Surface Mount Design and Land Pattern Standard" Revision: 08-Feb-18 Document Number: 53014 2 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CH www.vishay.com Vishay Sfernice PREFERRED MODELS AND VALUES Vishay Sfernice highly recommend to use the smallest sizes and flip chip version to get the best performances. Recommended Values: 10R/18R/25R/50R/75R/100R/150R/180R/200R/250R/330R/500R Those values are available with a MOQ of 100 pieces. Other values can be ordered upon request, but higher MOQ will apply: 1000 pieces for CH02016, 500 pieces for CH0402, 50 pieces for CH0603. Recommended termination: F Recommended tolerance: 2% DESIGN KITS Design kits are available Ex Stock in CH02016 and CH0402 sizes. There are 20 pieces per recommended value. F termination. 5 % tolerance. Those kits are packaged in pieces of tape and delivered in ESD bags. PACKAGING Standard packaging is waffle pack for sizes 0402 and 0603 and plastic tape and reel (low conductivity) for size 02016. Paper tape and reel is available for size 0402 and either paper tape and reel or plastic tape and reel (low conductivity) for size 0603. Depending on the type of terminations, parts will be packed differently: One face: * Gold terminations: Active face up * Tin/silver termination: Active face down Note * Please refer to Vishay Sfernice Application Note "Guidelines for Vishay Sfernice Resistive and Inductive Products" for soldering recommendation (document number 52029, 3. Guidelines for Surface Mounting Components (SMD), profile number 3 applies NUMBER OF PIECES PER PACKAGE SIZE 02016 0402 0603 MOQ See MOQ mentioned on preferred models and values WAFFLE PACK 2" X 2" TAPE AND REEL TAPE WIDTH Min. Max. 100 5000 484 100 8 mm 100 PACKAGING RULES Waffle Pack Tape and Reel Can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered exceeds maximum quantity of a single waffle pack, the waffle packs are stacked up on the top of each other and closed by one single cover. To get "not stacked up" waffle pack in case of ordered quantity > maximum number of pieces per package: Please consult Vishay Sfernice for specific ordering code. See Part Numbering information to get the quantity desired by tape. Revision: 08-Feb-18 In regard to the CH02016 size only, up to 5 empty cavities can be found every 1000 parts in the reel. Nevertheless, the number of requested parts will be respected. Document Number: 53014 3 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CH www.vishay.com Vishay Sfernice GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CH0402-50RJF (preferred part number format) C H 0 4 0 2 - 5 0 R J F T 9 9 9 GLOBAL MODEL SIZE OHMIC VALUE TOLERANCE TERMINATION PACKAGING OPTION CH 02016 0402 0603 10R to 500R F=1% G=2% J=5% K = 10 % F (Flip Chip): SnAg over nickel barrier N (W/A): SnAg over nickel barrier (except 02016) P (one face): (1) Gold bonding pads G (W/A): Gold over nickel barrier (except 02016) For more information see Codification of Packaging table From 1 to 3 digits. Leave blank if no option. Historical Part Number example: CH02016-100RGFPT1K (tapes of 1K pieces) CH0402-50RJF (waffle pack) CHKIT Part Numbers (2): CHKIT-02016 CHKIT-0402 Notes * Historical part numbers are not recommended but can still be used for ordering (1) Gold termination for application in hermetic package (2) CHKIT for 0603 size is not available CODIFICATION OF PACKAGING WAFFLE PACK (standard packaging for CH0402 and CH0603) W 100 min., 1 mult PLASTIC TAPE (standard packaging for CH02016 and CH0603) T 100 min., 1 mult TA 100 min., 100 mult TB 250 min., 250 mult TC 500 min., 500 mult TD 1000 min., 1000 mult TE 2500 min., 2500 mult TF Full tape (quantity depending on size of chips) PAPER TAPE (standard packaging for CH0402 - available for CH0603) PT 100 min., 1 mult PA 100 min., 100 mult PB 250 min., 250 mult PC 500 min., 500 mult PD 1000 min., 1000 mult PE 2500 min., 2500 mult PF Full tape (quantity depending on size of chips) TYPICAL HIGH FREQUENCY PERFORMANCE ELECTRICAL MODEL Z C Z0 Z0 Cg Lc Lc L C L R Z Lc Cg Cg R Internal shunt capacitance Internal inductance Resistance Internal impedance (R, L, C) External connection inductance External capacitance to ground Revision: 08-Feb-18 Document Number: 53014 4 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CH www.vishay.com Vishay Sfernice The complex impedance of the chip resistor is given by the following equations: 2 2 2 R + j L - R C - L C Z = ------------------------------------------------------------------------------------2 2 2 4 1 + C R C - 2L + L C Z 1 - x -------- = ----------------------------------------------------------------------------------------2 2 2 4 R 1 + C R C - 2L + L C 2 2 2 L - R C - L C 1 + -----------------------------------------------------------R 2 2 2 2 - 1 L - R C - L C = tan -----------------------------------------------------------R Notes * =2xxf * f: Frequency L The chip resistor itself is purely resistive when R = ---- . The smaller the L x C product the greater the frequency range over C which the resistor looks approximately resistive. Z This can be seen on the graphs showing the ratio -------- versus frequency. R R, L and C are relevant to the chip resistor itself. Lc and Cg also depends on the way the chip resistor is mounted. It is important to notice that after assembly the external reactance of Lc and Cg will be combined to internal reactance of L and C. This combination can upgrade or downgrade the HF behavior of the component. This is why we are displaying two sets of data: Z * -------- versus frequency curves which aims to show at a glance the intrinsic HF performance of a given chip resistor R * S-parameters versus frequency curves relevant to chip resistor when assembled on ideal Z0 impedance transmission line These lines are terminated with adapted source and load impedance respectively Zs and Zl with Z0 = ZL = Zs (for others configurations please consult us). Equivalent circuit for S-parameters: Z total C ZS G Z0 Z0 Cg Lc Lc L Cg ZL R S-parameters are computed taking into account all the resistive, inductive and capacitive elements (Z total) and Z0 = ZL = Zs = R. Revision: 08-Feb-18 Document Number: 53014 5 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CH www.vishay.com Vishay Sfernice INTERNAL IMPEDANCE CURVES 1.1 10 25 50 75 1.0 0.9 100 0.8 150 IZI/R 0.7 200 0.6 250 0.5 0.4 500 0.3 0.2 0.1 0.1 1 10 100 f (GHz) Internal impedance curve for 02016 size (F and P terminations) 1.1 10 25 1.0 50 0.9 75 0.8 100 IZI/R 0.7 150 0.6 200 0.5 250 0.4 0.3 500 0.2 0.1 0.1 1 10 100 f (GHz) Internal impedance curve for 0402 size (F and P terminations) Revision: 08-Feb-18 Document Number: 53014 6 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CH www.vishay.com Vishay Sfernice INTERNAL IMPEDANCE CURVES 1.1 10 25 50 75 1.0 0.9 0.8 100 IZI/R 0.7 0.6 0.5 150 0.4 200 0.3 250 0.2 500 0.1 0.1 1 10 100 f (GHz) Internal impedance curve for 0402 size (N and G terminations) 1.1 10 25 1.0 50 0.9 0.8 75 IZI/R 0.7 100 0.6 0.5 150 0.4 200 250 0.3 0.2 500 0.1 0.1 1 10 100 f (GHz) Internal impedance curve for 0603 size (F and P terminations) Revision: 08-Feb-18 Document Number: 53014 7 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CH www.vishay.com Vishay Sfernice INTERNAL IMPEDANCE CURVES 1.1 10 25 50 1.0 75 0.9 0.8 IZI/R 0.7 100 0.6 0.5 150 0.4 200 0.3 250 0.2 500 0.1 0.1 1 10 100 f (GHz) Internal impedance curve for 0603 size (N and G terminations) S-PARAMETER CH02016 (F and P Terminations) -2 -2 -3 -3 S21 S21 -4 Magnitude (dB) Magnitude (dB) -4 -5 -6 -7 -8 -5 -6 -7 S11 -8 -9 -9 S11 - 10 0.1 1 10 100 - 10 0.1 1 10 f (GHz) f (GHz) CH02016 flip chip (Z0 = ZI = Zs = R = 50 ) CH02016 flip chip (Z0 = ZI = Zs = R = 100 ) Revision: 08-Feb-18 100 Document Number: 53014 8 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CH www.vishay.com Vishay Sfernice S-PARAMETER CH0402 (F and P Terminations) -2 -2 -3 -3 S21 -4 S21 -5 -6 -7 S11 Magnitude (dB) Magnitude (dB) -4 -5 -6 -7 -8 -8 -9 -9 - 10 0.1 1 10 100 - 10 0.1 S11 1 10 f (GHz) f (GHz) CH0402 flip chip (Z0 = ZI = Zs = R = 50 ) CH0402 flip chip (Z0 = ZI = Zs = R = 100 ) 100 CH0402 (N and G Terminations) -2 -2 -3 -3 -4 -4 S21 Magnitude (dB) Magnitude (dB) S21 -5 -6 S11 -7 -5 -6 -7 S11 -8 -8 -9 -9 - 10 0.1 1 10 100 - 10 0.1 1 10 f (GHz) f (GHz) CH0402 wraparound (Z0 = ZI = Zs = R = 50 ) CH0402 wraparound (Z0 = ZI = Zs = R = 100 ) 100 CH0603 (F and P Terminations) -2 -2 -3 -3 -4 -4 -5 S21 -6 -7 Magnitude (dB) Magnitude (dB) S11 S21 -5 -6 -7 -8 -8 -9 -9 - 10 0.1 1 10 100 - 10 0.1 S11 1 10 f (GHz) f (GHz) CH0603 flip chip (Z0 = ZI = Zs = R = 50 ) CH0603 flip chip (Z0 = ZI = Zs = R = 100 ) Revision: 08-Feb-18 100 Document Number: 53014 9 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CH www.vishay.com Vishay Sfernice S-PARAMETER CH0603 (N and G Terminations) -2 -2 -3 -3 -4 -4 Magnitude (dB) Magnitude (dB) S11 -5 -6 -7 -8 -5 S21 -6 S11 -7 -8 S21 -9 - 10 0.1 1 10 100 -9 - 10 0.1 1 10 f (GHz) f (GHz) CH0603 wraparound (Z0 = ZI = Zs = R = 50 ) CH0603 wraparound (Z0 = ZI = Zs = R = 100 ) Revision: 08-Feb-18 100 Document Number: 53014 10 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: CHS04TB CHS04TA CH1206-100UFP CH0603-100UFP CH02016 150R 5%P CH0402100R1%N CHS08TA CH0402-50RJNT CH0402-10RJFT CH0402-18RJFT CH0402-25RJFT CH0402-50RGFT CH0402-100RGFT CH0402-150RGFT CH0402-180RGFT CH0402-200RGFT CH0402-250RGFT CH0402-330RGFT CH0402-500RGFT CH0402-75RGFT CH02016-100RGFT CH02016-10RJFT CH02016-150RGFT CH02016-180RGFT CH0201618RJFT CH02016-200RGFT CH02016-250RGFT CH02016-25RJFT CH02016-330RGFT CH02016-500RGFT CH02016-50RGFPT CH02016-75RGFT CH0402-20RJPT CH0402-100RJNT CH0603-50RJFT CH0402-10RJNT CH0402-250UJNT CH0603-250RJNT CH0603-100RJNT CH0603-75UJNT CH02016-50RJFPT CH02016-15RJF CH02016-10RJF CH0402-100RFNPT CH02016-50RJFT CH0603-50RJNT CH0402-180RGFPT CH0402-500RGFPT CH0402-50RGFPT CH02016-10RJFW CH0402-200RGFPT CH0402-25RJFPT CH0402-20RJFPA CH040250RJNPT CH02016-50RGFT CH0402-20RJPW CH0402-330RGFPT CH0402-100RGFPT CH0402-10RJNPT CH0402-18RJFPT CH0402-250RGFPT CH0402-150RGFPT CH0402-10RJFPT CH0402-75RGFPT CH0201615RJFW CH0402-250RJNPT CH0402-100RJNPT CHKIT-0402 CH0402-20RJPPE CH02016-18RJFTC CH040218RJFPA CH0603-100RJNTA CH0402-180RGFPA CH0402-200RGFPA CH0402-250RGFPA CH0402-330RGFPA CH0603-10RJFTA CH0603-330RGFTA CH0603-50RGFTA CH0603-75RGFTA