Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview Applications The R74 125C is constructed of metallized polypropylene film with radial leads of tinned wire. The radial leads are electrically welded to the metal layer on the ends of the capacitor winding. The capacitor is encapsulated in a self-extinguishing solvent resistant plastic case, with thermosetting resin material meeting UL 94 V-0 requirements. Two different winding constructions are used depending on voltage parameters. Please see Performance Characteristics for more information. Typical applications include electronic lighting such as automotive headlamps and ballasts, as well as pulse applications with high AC voltage and high current in combination with a high ambient temperature. Not suitable for across-the-line application (see Suppressor Capacitors). Automotive grade devices meet the demanding Automotive Electronics Council's AEC-Q200 qualification requirements. Benefits * Voltage range: 500 - 700 VAC * Capacitance range: 680 pF - 0.1 F * Lead Spacing: 15.0 - 22.5 mm * Capacitance tolerance: 5%, 10% * Climatic category: 55/125/56 IEC 60068-1 * Operating temperature range of -55C to +125C * RoHS compliance and lead-free terminations * Tape & Reel packaging in accordance with IEC 60286-2 *Self-healing * Automotive (AEC-Q200) grades available Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Part Number System R74 Series Metallized Polypropylene 5 F 1100 Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) 5 = 500 7 = 700 I = 15 N = 22.5 The last three digits represent significant figures. The first digit specifies the total number of zeros to be added. AA H0 J Packaging Internal Use Capacitance Tolerance See Ordering Options Table H0 H1 H3 (Hx = 125C) J = 5% K = 10% Built Into Tomorrow (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 1 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code 4 +2/-0 H0 = 18.5 0.5 AA DQ H0 = 18.5 0.5 H0 = 18.5 0.5 3.5 +0.5/-0 4.0 +0.5/-0 3.2 +0.3/-0.2 18 1 30 +5/-0 25 +2/-1 GY CK JB JE JH JM 40 50 Standard Lead and Packaging Options Bulk (Bag) - Short Leads Ammo Pack Other Lead and Packaging Options 15 22.5 Tape & Reel (Standard Reel O 355 mm) Tape & Reel (Large Reel O 500 mm) Bulk (Bag)-Short Leads Bulk (Bag)-Short Leads Bulk (Bag)-Short Leads Bulk (Bag)-Long Leads Bulk (Bag)-Long Leads Bulk (Bag)-Long Leads (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 2 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Dimensions - Millimeters Loose Taped L W H d H0 LL p P2 P2 S T H P2 L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 4.0 5.0 6.0 7.5 8.5 9.0 10.0 11.0 13.0 6.0 7.0 8.5 10.0 11.0 13.0 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 10.0 11.0 12.0 13.5 14.5 12.5 16.0 19.0 12.0 15.0 16.0 17.0 18.5 20.0 22.0 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 Note: See Ordering Options Table for lead length (LL/Ho) options. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 3 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Performance Characteristics Dielectric Plates Winding Leads Protection Related documents Rated voltage VR Capacitance range (F) Capacitance values Capacitance tolerance Operating temperature range Rated temperature TR Voltage derating Climatic category Polypropylene film Metal layer deposited by evaporation under vacum Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. IEC 60384-16, IEC 60384-17 500 VAC, 1,600 VDC (2 sections) 700 VAC, 2,000 VDC (3 sections) 0.001 - 0.1 (2 sections) 0.00068 - 0.068 (3 sections) E12 series (IEC 60063) measured at 1 kHz and +20 1C 5%, 10% -55C to +125C +105C Above +105C DC and AC voltage derating is 1.25%/C 55/125/56 IEC 60068-1 Storage time: 24 months from the date marked on the package label Average relative humidity per year 70% Storage conditions RH 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: -40 to 80C (see "Maximum Humidity in Storage Conditions" graph below) Test voltage Capacitance drift Maximum pulse steepness Temperature coefficient Self inductance (Lead length ~ 2 mm) 1.6 x VR VDC for 2 seconds (between terminations) at +25C 5C Maximum 1% after a 2-year storage period at a temperature of +10C to +40C and a relative humidity of 40% to 60% dV/dt according to Table 1. For working voltages lower than rated voltage (V < VR), the specified dV/dt can be multiplied by the factor VR /V. -(200100) ppm/C at 1 kHz Lead Spacing (mm) 15 22.5 L (nH) 10 16 Maximum 1 nH per 1 mm lead and capacitor length. Measured at 25C 5C Dissipation factor tan Frequency C 2.2 nF 2.2 nF < C 0.027 F 0.027 F < C 0.1 F 1 kHz 0.01% 0.01% 0.04% 10 kHz 0.02% 0.02% 0.06% 100 kHz 0.03% 0.08% 0.25% (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 4 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Performance Characteristics cont. Measured at +25C 5C, 100 VDC 60 seconds Minimum Values Between Terminals Insulation resistance All Capacitance Values 100,000 M Maximum Humidity in Storage Condition 100 25 80 20 70 60 Tlim (C) 50 40 30 Days Annual Average 30 20 10 5 10 0 15 0 -40 -20 0 20 40 Temperature (C) 60 80 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 Relative Humidity (%) 90 Maximum Overtemperature Tlim vs Th Temperature Th(C) Maximum Irms vs. Th 120% Maximum Irms 100% 80% 60% 40% 20% 0% 85 90 95 100 105 110 Temperature Th(C) 115 120 125 130 Th is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation conditions in C. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 5 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Qualification Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC-Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC-Q200, please visit their website at www.aecouncil.com. Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th 85C) 500 VAC 1,000 100 Voltage (Vrms) Voltage (Vrms) 100 3,300 pF p = 10 0.01 F p = 15 0.033 F p = 15 0.1 F p = 22.5 10 1 700 VAC 1,000 0 1 10 Frequency (kHz) 100 1 1,000 1,200 pF p = 15 4,700 pF p = 15 0.018 F p = 22.5 0.068 F p = 22.5 10 0 1 10 Frequency (kHz) 100 1,000 Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th 85C) 500 VAC 10 700 VAC 100 10 Current (Irms) Current (Irms) 1 0.1 0.01 3,300 pF p = 10 0.01 F p = 15 0.033 F p = 15 0.1 F p = 22.5 0 1 10 Frequency (kHz) 100 1 1,200 pF p = 15 4,700 pF p = 15 0.018 F p = 22.5 0.068 F p = 22.5 0.1 1,000 0.01 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com 0 1 10 Frequency (kHz) 100 F3029_R74 125C * 11/19/2020 1,000 6 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Environmental Test Data Damp Heat, Steady State Test Test Conditions: Temperature: Relative humidity (RH): Test duration: Endurance Test +40C 2C 93% 2% 56 days Test Conditions Test 1st Temperature: Voltage applied: Test duration: +125C +0/-2C 0.94 x VR (AC) at 50 Hz 2,000 hours Test 2nd Temperature: Voltage applied: Test duration: +105C 2C 1.25 x VR (AC) at 50 Hz 2,000 hours Resistance to Soldering Heat Test Test Conditions Solder bath temperature: Dipping time (with heat screen): 260C 5C 10 seconds 1 second Performances | C/C| 2%, tan 0.001 at 1 kHz IR after test 50% of initial limit Performances | C/C| 5%, tan 0.0015 at 1 kHz IR after test 50% of initial limit Performances | C/C| 1%, tan 0.001 at 1 kHz IR after test initial limit Environmental Compliance All KEMET pulse capacitors are RoHS Compliant. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 7 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Table 1 - Ratings & Part Number Reference Dimensions in mm T H L VAC VDC Capacitance Value (F) Lead dV/dt Spacing (S) (V/s) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 700 700 700 700 700 700 700 700 700 700 700 700 700 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.015 0.018 0.018 0.022 0.022 0.027 0.033 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.00068 0.00082 0.0010 0.0012 0.0013 0.0018 0.0022 0.0025 0.0027 0.0033 0.0036 0.0039 0.0043 4.0 4.0 4.0 5.0 5.0 6.0 6.0 6.0 7.5 7.5 13.0 8.5 13.0 10.0 13.0 10.0 11.0 6.0 6.0 7.0 7.0 8.5 10.0 10.0 11.0 13.0 13.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 6.0 6.0 6.0 10.0 10.0 10.0 11.0 11.0 12.0 12.0 12.0 13.5 13.5 12.0 14.5 12.0 16.0 12.0 16.0 19.0 15.0 15.0 16.0 16.0 17.0 18.5 18.5 20.0 22.0 22.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 11.0 11.0 12.0 12.0 12.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 VAC VDC Capacitance Value (F) T (mm) H (mm) L (mm) Lead Spacing (S) Max K0 (V2/s) KEMET Internal Part Number Customer Part Number 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 14,400,000 14,400,000 14,400,000 14,400,000 14,400,000 14,400,000 14,400,000 14,400,000 14,400,000 14,400,000 14,400,000 14,400,000 14,400,000 14,400,000 14,400,000 14,400,000 14,400,000 3,840,000 3,840,000 3,840,000 3,840,000 3,840,000 3,840,000 3,840,000 3,840,000 3,840,000 3,840,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 745I1270(1)H3(2) 745I1330(1)H3(2) 745I1390(1)H3(2) 745I1470(1)H0(2) 745I1560(1)H0(2) 745I1680(1)H0(2) 745I1820(1)H0(2) 745I2100(1)H0(2) 745I2120(1)H0(2) 745I2150(1)H0(2) 745I2150(1)H1(2) 745I2180(1)H0(2) 745I2180(1)H1(2) 745I2220(1)H0(2) 745I2220(1)H1(2) 745I2270(1)H0(2) 745I2330(1)H0(2) 745N2180(1)H0(2) 745N2220(1)H0(2) 745N2270(1)H0(2) 745N2330(1)H0(2) 745N2390(1)H0(2) 745N2470(1)H0(2) 745N2560(1)H0(2) 745N2680(1)H0(2) 745N2820(1)H0(2) 745N3100(1)H0(2) 747I0680(1)H3(2) 747I0820(1)H3(2) 747I1100(1)H3(2) 747I1120(1)H3(2) 747I1130(1)H3(2) 747I1180(1)H3(2) 747I1220(1)H3(2) 747I1250(1)H3(2) 747I1270(1)H0(2) 747I1330(1)H0(2) 747I1360(1)H0(2) 747I1390(1)H0(2) 747I1430(1)H0(2) R745I1270(1)H3(2) R745I1330(1)H3(2) R745I1390(1)H3(2) R745I1470(1)H0(2) R745I1560(1)H0(2) R745I1680(1)H0(2) R745I1820(1)H0(2) R745I2100(1)H0(2) R745I2120(1)H0(2) R745I2150(1)H0(2) R745I2150(1)H1(2) R745I2180(1)H0(2) R745I2180(1)H1(2) R745I2220(1)H0(2) R745I2220(1)H1(2) R745I2270(1)H0(2) R745I2330(1)H0(2) R745N2180(1)H0(2) R745N2220(1)H0(2) R745N2270(1)H0(2) R745N2330(1)H0(2) R745N2390(1)H0(2) R745N2470(1)H0(2) R745N2560(1)H0(2) R745N2680(1)H0(2) R745N2820(1)H0(2) R745N3100(1)H0(2) R747I0680(1)H3(2) R747I0820(1)H3(2) R747I1100(1)H3(2) R747I1120(1)H3(2) R747I1130(1)H3(2) R747I1180(1)H3(2) R747I1220(1)H3(2) R747I1250(1)H3(2) R747I1270(1)H0(2) R747I1330(1)H0(2) R747I1360(1)H0(2) R747I1390(1)H0(2) R747I1430(1)H0(2) dV/dt (V/s) Max K0 (V2/s) KEMET Intenal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = 10%. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 8 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Table 1 - Ratings & Part Number Reference cont. Dimensions in mm T H L VAC VDC Capacitance Value (F) Lead dV/dt Spacing (S) (V/s) 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 0.0047 0.0052 0.0056 0.0062 0.0068 0.0082 0.0082 0.010 0.010 0.012 0.012 0.015 0.018 0.0062 0.0068 0.0075 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.062 0.068 6.0 6.0 6.0 7.5 7.5 7.5 9.0 8.5 13.0 10.0 13.0 10.0 11.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 7.0 8.5 8.5 10.0 10.0 11.0 13.0 13.0 13.0 12.0 12.0 12.0 13.5 13.5 13.5 12.5 14.5 12.0 16.0 12.0 16.0 19.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 16.0 17.0 17.0 18.5 18.5 20.0 22.0 22.0 22.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 VAC VDC Capacitance Value (F) T (mm) H (mm) L (mm) Lead Spacing (S) Max K0 (V2/s) KEMET Internal Part Number Customer Part Number 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 747I1470(1)H0(2) 747I1520(1)H0(2) 747I1560(1)H0(2) 747I1620(1)H0(2) 747I1680(1)H0(2) 747I1820(1)H0(2) 747I1820(1)H1(2) 747I2100(1)H0(2) 747I2100(1)H1(2) 747I2120(1)H0(2) 747I2120(1)H1(2) 747I2150(1)H0(2) 747I2180(1)H0(2) 747N1620(1)H0(2) 747N1680(1)H0(2) 747N1750(1)H0(2) 747N1820(1)H0(2) 747N2100(1)H0(2) 747N2120(1)H0(2) 747N2150(1)H0(2) 747N2180(1)H0(2) 747N2220(1)H0(2) 747N2270(1)H0(2) 747N2330(1)H0(2) 747N2390(1)H0(2) 747N2470(1)H0(2) 747N2560(1)H0(2) 747N2620(1)H0(2) 747N2680(1)H0(2) R747I1470(1)H0(2) R747I1520(1)H0(2) R747I1560(1)H0(2) R747I1620(1)H0(2) R747I1680(1)H0(2) R747I1820(1)H0(2) R747I1820(1)H1(2) R747I2100(1)H0(2) R747I2100(1)H1(2) R747I2120(1)H0(2) R747I2120(1)H1(2) R747I2150(1)H0(2) R747I2180(1)H0(2) R747N1620(1)H0(2) R747N1680(1)H0(2) R747N1750(1)H0(2) R747N1820(1)H0(2) R747N2100(1)H0(2) R747N2120(1)H0(2) R747N2150(1)H0(2) R747N2180(1)H0(2) R747N2220(1)H0(2) R747N2270(1)H0(2) R747N2330(1)H0(2) R747N2390(1)H0(2) R747N2470(1)H0(2) R747N2560(1)H0(2) R747N2620(1)H0(2) R747N2680(1)H0(2) dV/dt (V/s) Max K0 (V2/s) KEMET Intenal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = 10%. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 9 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as a primary solder. This has increased the liquidus temperature from that of 183C for SnPb eutectic alloy to 217 - 221C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 - 170C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above recommended limits may result in degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Wave Soldering Recommendations Manual Soldering Recommendations 300 The following is recommended for manual soldering with a soldering iron. 2+3 seconds maximum 260C 250 Second Wave First Wave Recommended Soldering Temperature Temperature (C) 200 400 Soldering Iron Bit Temperature (C) 350 300 T < 150C Cooling Preheating 150 ca. 2C/second ca. 3.5C/second typical ca. 5C/second Tpreheat 100 Typical 250 50 200 150 0 100 0 40 80 120 160 200 240 Time (seconds) 50 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350C (+10C maximum) with the soldering duration not to exceed more than 3 seconds. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 10 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process Figure 1. Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Pitch 15 mm Capacitor Pitch > 15 mm Capacitor Pitch 15 mm Capacitor Pitch > 15 mm Polyester 130C 130C 270C 270C Polypropylene 125C 130C 260C 270C Paper 130C 140C 270C 270C Polyphenylene Sulphide 150C 160C 270C 270C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160C Polypropylene 125C Paper 160C Polyphenylene Sulphide 160C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering. Great care must be taken so that the parts are not overheated. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 11 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Construction 2 Sections Molded Plastic Case Single-sided Metallized Polypropylene Film (First Layer) Detailed Cross Section Molded Plastic Self-Extinguishing Case Resin Single-sided Metallized Polypropylene Film (Second Layer) FILM WINDING SC Single-sided Margin Metallized Polypropylene Film Margin Metal Contact Layer Single-sided Metal Contact Metallized Layer Polypropylene Film FILM WINDING Margin SCHEME OPTIONS 1 Section tallized Polypropylene Film D M Single-sided Metallized Polypropylene Film 2 Sections LeadsDouble-sided Metallized Polyester Film Winding Schemes ided zed ylene Single-sided Metallized Polypropylene Film 2 Sections ided zed ylene Double-sided Metallized Polyester Carrier Film Single-sided Metallized Polypropylene Film 1 Section 3 Sections Single-sided Metallized Polypropylene Film Double-sided Metallized Polyester Carrier Metallized Impregnated Paper Film Double-sided Metallized Single-sided Polypropylene Polyester Carrier Metallized Film Dielectric Film Polypropylene Film Double-sided Metallized Polyester Carrier Film Metallized Polyphenylene Sulfide Film (SMR) 3 Sections 4 Sections 4 Sections Metallized Impregnated Paper Metallized Polyphenylene 1 Section Sulfide Film (SMR) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com 2 Sections 4 Sections Polypropylene Film Dielectric D M Metallized Polyphenylene Sulfide Film with Vacuum-Evaporated Aluminum Electrodes 1 Section Polypropylene Film/Foil F3029_R74 125C * 11/19/2020 12 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Marking Pitch - 10, 15 & 22.5 Marking Variants* FRONT TOP Manufacturer's Logo Series Dielectric Capacitance Capacitance Tolerance Rated Voltage Dielectric Capacitance Capacitance Tolerance Rated Voltage Dielectric Capacitance Capacitance Tolerance Rated Voltage Date Code Can also be style "19-26" (Year, Calendar Week) FRONT Manufacturer's Logo Series Date Code Can also be style "19-26" (Year, Calendar Week) Manufacturer's Logo Series Date Code Can also be style "19-26" (Year, Calendar Week) * Differences are caused by technology (Clichee or ink) and technic (production line) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 13 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Marking cont. Pitch - 10, 15, & 22.5 Marking Variants* FRONT TOP Series Manufacturer's Logo Dielectric Capacitance Rated Voltage Date Code QA-Number Capacitance Tolerance Hot marking imprinting with or without color Series Manufacturer's Logo Dielectric Capacitance Rated Voltage Date Code Pitch - 10, 15, & 22.5 Marking Variants* FRONT TOP Series Dielectric Capacitance Tolerance Manufacturer's Logo Capacitance Rated Voltage Date Code QA-Number * Differences are caused by technology (Clichee or ink) and technic (production line) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 14 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Marking cont. Manufacturing Date Code (IEC-60062) Year Code Year Code Month Code Month Code 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 A B C D E F H J K L M 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 M N P R S T U V W X A January February March April May June 1 2 3 4 5 6 July August September October November December 7 8 9 O N D Packaging Quantities Lead Spacing Thickness Height (mm) (mm) Length Bulk (mm) Short Leads Lead and Packaging Code AA - JB JE - JH Bulk Long Leads Standard Reel o 355 mm Large Reel o 500 mm Ammo Taped JM 40 - 50 GY CK DQ 2,000 1,300 1,000 2,200 2,000 1,800 1,800 1,500 1,200 750 600 500 1,500 1,250 1,000 1,000 800 680 10 4.0 5.0 6.0 9.0 11.0 12.0 13.0 13.0 13.0 15 4.0 5.0 6.0 7.5 8.5 9.0 10.0 11.0 13.0 10.0 11.0 12.0 13.5 14.5 12.5 16.0 19.0 12.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 2,500 2,000 1,750 1,000 1,000 1,000 750 450 750 1,500 1,250 1,000 800 650 700 550 400 520 1,500 1,000 900 700 500 520 500 350 490 750 600 500 350 300 270 270 270 200 1,500 1,250 1,000 800 700 650 600 500 480 1,000 800 680 500 440 410 380 340 280 22.5 6.0 7.0 8.5 10.0 11.0 13.0 15.0 16.0 17.0 18.5 20.0 22.0 26.5 26.5 26.5 26.5 26.5 26.5 805 700 468 396 360 300 450 450 350 350 200 150 500 500 300 300 250 200 300 250 250 160 190 130 700 550 450 350 350 300 464 380 280 235 217 - (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 15 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Lead Taping & Packaging (IEC 60286-2) Lead Spacing 10 & 15 mm Figure 1 -- Lead Spacing 7.5 mm P P2 P P P1 h h Lead Spacing 22.5 & 27.5 mm h P2 P h W2 A H0 B Od W0 P0 F t W1 W2 H0 W0 W D0 A Od W1 B W t t F A-B P1 P0 D0 A-B P1 P2 t Taping Specification Dimensions (mm) Description Symbol 7.5 10.0 Lead Spacing 15.0 22.5 27.5 Figure 1 Figure 2 Figure 2 Figure 3 Figure 3 Tolerance Lead wire diameter d 0.5 - 0.6 0.6 0.6 - 0.8 0.8 0.8 0.05 Taping lead space P 12.7 25.4 25.4 38.1 38.1 1 Feed hole lead space * P0 12.7 12.7 12.7 12.7 12.7 0.2 ** Centering of the lead wire P1 2.6 7.7 5.2 7.8 5.3 0.7 Centering of the body P2 6.35 12.7 12.7 19.05 19.05 1.3 Lead spacing *** F 7.5 10.0 15.0 22.5 27.5 +0.6/-0.1 Component alignment h 0 0 0 0 0 2 Component deviation p 0 0 0 0 0 1 Height of component from tape center H0 **** 18.5 18.5 18.5 18.5 18.5 0.5 Carrier tape width W 18 18 18 18 18 +1/-0.5 Hold down tape width W0 6 9 10 10 10 Minimum Hole position W1 9 9 9 9 9 0.5 Hold down tape position W2 3 3 3 3 3 Maximum Feed hole diameter D0 4 4 4 4 4 0.2 Total tape thickness t 0.7 0.7 0.7 0.7 0.7 0.2 * Available also 15 mm. ** Maximum 1 mm on 20 lead spacing. *** 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request. **** H0 = 16.5 mm is available upon request. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 16 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Lead Taping & Packaging (IEC 60286-2) cont. Ammo Specifications Dimensions (mm) H W T 360 340 59 H T Reel Specifications W Dimensions (mm) D H W 355 500 30 25 55 Maximum D H W (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 17 Film Capacitors - Polypropylene Pulse/High Frequency Capacitors R74, 125C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) KEMET Electronics Corporation Sales Offices Foracompletelistofourglobalsalesoffices,pleasevisitwww.kemet.com/sales. Disclaimer Allproductspecifications,statements,informationanddata(collectively,the"Information")inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation's("KEMET")knowledgeoftypicaloperatingconditionsforsuch applications,butarenotintendedtoconstitute-andKEMETspecificallydisclaims-anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3029_R74 125C * 11/19/2020 18