30KPA28A thru 30KPA288CA, e3 30kW Transient Voltage Suppressor SCOTTSDALE DIVISION FOR APPEARANCE These Microsemi 30 kW Transient Voltage Suppressors (TVSs) are designed for applications requiring protection of voltage-sensitive electronic devices that may be damaged by harsh or severe voltage transients including lightning per IEC61000-4-5 and class levels with various source impedances described herein. This series is available in 33 to 400 volt standoff voltages (VWM) in both unidirectional and bi-directional with either 5% or 10% tolerances of the Breakdown Voltage (VBR). Microsemi also offers numerous other TVS products to meet higher or lower power demands and special applications. IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES APPLICATIONS / BENEFITS @ 250C UNLESS OTHER WISE SPECIFIED * Available in both Unidirectional and Bidirectional construction (Bidirectional with a CA suffix) * Suppresses transients up to 30 kW @ 10/1000 s and 200 kW @ 8/20 s (see Figure 1) * Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B * Glass passivated chip junction in a P600 package * Reverse leakage below 2 A for voltages above 73 volts VBR * Optional 100% screening for avionics grade is available by adding MA prefix to part number for added 100% temperature cycle -55oC to +125oC (10X) as well as surge (3X) and 24 hours HTRB with post test VZ & IR (in the operating direction for unidirectional or both directions for bidirectional) * Options for screening in accordance with MIL-PRF19500 for JANTX are available by adding MX prefix to the part number. RoHS Compliant devices available by adding "e3" suffix * * * * * MAXIMUM RATINGS * * * * * * MECHANICAL AND PACKAGING Peak Pulse Power dissipation at 25 C: 30,000 watts at 10/1000 s (also see Figures 1 and 2) Impulse repetition rate (duty factor): 0.05% tclamping (0 volts to V(BR) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional Operating & Storage temperature: -65C to +150C Thermal resistance: 17.5 C/W junction to lead, or 77.5 C/W junction to ambient when mounted on FR4 PC board with 4 mm2 copper pads (1oz) and track width 1 mm, length 25 mm Steady-State Power dissipation: 7 watts at TL = 27.5oC, or 1.61 watts at TA = 25C when mounted on FR4 PC board described for thermal resistance Forward Surge: 400 Amps 8.3 ms half-sine wave for unidirectional devices only Solder temperatures: 260 C for 10 s (maximum) Copyright (c) 2009 09-01-2009 REV A, SD89A Protection from switching transients and induced RF Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1,2,3,4: 30KPA33A - 30KPA400A or CA Class 5: 30KPA33A - 30KPA400A or CA Class 5: 30KPA33A - 30KPA220A or CA (long distance) Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1,2, 3: 30KPA33A to 30KPA400A or CA Class 4: 30KPA33A to 30KPA220A or CA Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2: 30KPA33A to 30KPA400A or CA Class 3: 30KPA33A to 30KPA220A or CA Class 4: 30KPA33A to 30KPA110A or CA * * * * * * * CASE: Void-free transfer molded thermosetting epoxy P600 package meeting UL94V-0 FINISH: Tin-Lead or RoHS compliant annealed matte-Tin plating readily solderable per MIL-STD750, method 2026 MARKING: 3/4 Polarity band when required 3/4 MSC Microsemi 3/4 Part Number 30KPAXX 3/4 WW/YY Date code POLARITY: Band denotes cathode. Bidirectional not marked for polarity WEIGHT: 0.07oz or 2.5grams (approximate) TAPE & REEL option: Standard per EIA-296 for axial package (add "TR" suffix to part number) See package dimension on last page Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 30KP33A - 30KP400CA, e3 * * WWW . Microsemi .C OM DESCRIPTION 30KPA28A thru 30KPA288CA, e3 30kW Transient Voltage Suppressor SCOTTSDALE DIVISION Part Number Rated Stand-off Voltage VWM VOLTS @ 250C UNLESS OTHER WISE SPECIFIED Breakdown Voltage V(BR) Volts @ I(BR) I(BR) V(BR) VOLTS MIN mA Copyright (c) 2009 09-01-2009 REV A, SD89A Maximum Reverse Leakage @ VWM ID Maximum Peak Pulse Current IPP VOLTS Amps Amps 50.0 55.2 58.5 61.8 67.2 72.0 73.0 77.4 81.6 86.4 91.4 92.4 102.0 104.0 107.0 109.0 111.5 114.0 119.4 129.0 139.2 146.4 156.0 165.6 175.2 194.4 213.0 223.2 233.4 245.0 252.6 272.4 275.0 290.4 319.8 346.6 387.0 416.4 416.0 436.2 464.0 469.9 5000 5000 5000 5000 2000 1000 1000 250 150 50 20 20 15 10 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 606.0 548.9 517.9 490.3 450.9 420.8 415.1 391.5 371.3 350.7 331.5 327.9 297.2 291.3 283.2 278.0 271.7 265.8 253.8 234.9 217.7 207.0 194.2 183.0 172.9 155.9 142.3 135.8 129.8 123.7 252.6 272.4 110.2 104.3 94.7 86.9 78.3 72.8 72.8 69.5 65.3 64.5 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 30KP33A - 30KP400CA, e3 30KPA28A 28 31.28 50 30KPA30A 30 33.51 50 30KPA33A 33 36.90 50 30KPA36A 36 40.20 50 30KPA39A 39 43.60 20 30KPA42A 42 46.90 10 30KPA43A 43 48.00 20 30KPA45A 45 50.30 10 30KPA48 48 53.60 5 30KPA51A 51 57.00 5 30KPA54A 54 60.30 5 30KPA58A 58 64.80 5 30KPA60A 60 67.00 5 30KPA64A 64 71.50 5 30KPA66A 66 73.70 5 30KPA70A 70 78.20 5 30KPA71A 71 79.30 5 30KPA72A 72 80.40 5 30KPA75A 75 83.80 5 30KPA78A 78 87.10 5 30KPA184A 84 93.80 5 30KPA90A 90 100.50 5 30KPA96A 98 107.20 5 30KPA102A 102 113.90 5 30KPA108A 108 120.60 5 30KPA120A 120 134.00 5 30KPA132A 132 147.4 5 30KPA144A 144 160.80 5 30KPA150A 150 167.60 5 30KPA156A 156 174.30 5 30KPA160A 160 178.20 5 30KPA168A 168 187.70 5 30KPA170A 170 189.90 5 30KPA180A 180 201.10 5 30KPA198A 198 221.20 5 30KPA216A 216 241.30 5 30KPA240A 240 268.10 5 30KPA258A 258 288.20 5 30KPA260A 270 290.40 5 30KPA270A 270 301.60 5 30KPA280A 280 312.80 5 30KPA288A 288 321.70 5 NOTE: For bidirectional construction, indicate a CA suffix after the part number. Maximum Clamping @ IPP 10/1000s VC WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS Page 2 30KPA28A thru 30KPA288CA, e3 30kW Transient Voltage Suppressor SCOTTSDALE DIVISION Symbol VWM PPP V(BR) ID Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current IPP VC I(BR) WWW . Microsemi .C OM SYMBOLS & DEFINITIONS Definition Symbol Definition Peak Pulse Current Clamping Voltage Breakdown Current for V(BR) PPP Peak Pulse Power - kW GRAPHS Waveform Non-Repetitive tp - Pulse Time - sec FIGURE 1 Peak Pulse Power vs. Pulse Time to 50% of FIGURE 2 Pulse Waveform 30KP33A - 30KP400CA, e3 C - CAPACITANCE-PICOFARADS DIMENSIONS V(BR) - BREAKDOWN VOLTAGE-VOLTS FIGURE 3 Typical Capacitance vs. Breakdown Voltage NOTE: For Bidirectional Construction, indicate a CA suffix after part number. Capacitance will be one-half that shown in Figure 3. Copyright (c) 2009 09-01-2009 REV A, SD89A Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3