MIL-C-26482 Series 1 Type Connectors with PCB contacts PT07 jam nut receptacle S M H K .030 .001 DIA. FOR SIZE 16 & 20 CONTACTS J S A R THREAD P Z PCB TAIL STICK OUT HOW TO ORDER * Order by applicable 71 part number in table below. 71 prefix designates olive drab cadmium plated connector shell. (For availability of other finishes consult Amphenol, Sidney, NY) * Add insert arrangement to end of number. Refer to insert availability chart on page 4 and pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for pins in normal position, S for sockets in normal position. See page 26 for alternate rotation letter to use. Example part number: 71-533721-98P designates shell size 8 with a 8-98 insert and pin contacts in normal position. * Z dimension is determined by contact type in the insert arrangement. * Most common options are shown; other options are available. P Panel Thickness Part Number A Dia. +.001 -.005 H +.017 -.016 J Flat +.000 -.010 K +.011 -.010 M .010 Min. 6 71-533720-XXX .348 .625 .405 .125 .696 8 71-533721-XXX .473 .750 .530 .125 .696 10 71-533722-XXX .590 .875 .655 .125 12 71-533723-XXX .750 1.062 .818 14 71-533724-XXX .875 1.188 16 71-533725-XXX 1.000 1.312 18 71-533726-XXX 1.125 1.438 20 71-533727-XXX 1.250 22 71-533728-XXX 24 71-533729-XXX Shell Size All lockwire holes are .044 dia. min. Z +.025 -.035 Max. R Thread Class 2A S .010 Size 16 & 20 Contacts .062 .125 .4375-28 UNEF .812 .376 .062 .125 .5625-24 UNEF .938 .376 .696 .062 .125 .6875-24 UNEF 1.062 .376 .125 .696 .062 .125 .8750-20 UNEF 1.250 .376 .942 .125 .696 .062 .125 1.0000-20 UNEF 1.375 .376 1.066 .125 .696 .062 .125 1.1250-18 UNEF 1.500 .376 1.191 .125 .696 .062 .125 1.2500-18 UNEF 1.625 .376 1.562 1.316 .156 .884 .062 .250 1.3750-18 UNEF 1.812 .367 1.375 1.688 1.441 .156 .884 .062 .250 1.5000-18 UNEF 1.938 .367 1.500 1.816 1.566 .156 .917 .062 .250 1.6250-18 UNEF 2.062 .334 All dimensions for reference only. 42