HE (High-function Economy) Type [2-Channel (Form A Form B) Type] PhotoMOS RELAYS FEATURES 9.78 .385 6.4 .252 3.90.2 .154.008 6.4 .252 9.78 .385 3.60.2 .142.008 mm inch 1. Compact 8-pin DIP size The device comes in a compact (W) 6.4x(L) 9.78x(H) 3.9 m (W) .252x(L) .385x(H) .154 inch, 8-pin DIP size (through hole terminal type). 2. Applicable for 1 Form A 1 Form B use as well as two independent 1 Form A and 1 Form B use 3. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 4. High sensitivity, low ON resistance Can control a maximum 0.16 A (AQW654) load current with a 5 mA input current. Low ON resistance of 16 (AQW654). Stable operation because there are no metallic contact parts. 5. Low-level off state leakage current The SSR has an off state leakage current of several miliamperes, whereas the PhotoMOS relay has only 100 pA even with the rated load voltage of 400 V (AQW654). 6. Low thermal electromotive force (Approx. 1 V) TYPICAL APPLICATIONS * High-speed inspection machines * Data communication equipment * Telephone equipment TYPES Part No. Output rating* Type Load voltage AC/DC 400 V Through hole terminal Load current 120 mA Tape and reel packing style Picked from the Picked from the 1/2/3/4-pin side 5/6/7/8-pin side Tube packing style AQW654 Packing quantity Surface-mount terminal AQW654A AQW654AX AQW654AZ Tube Tape and reel 1 tube contains 40 pcs. 1 batch contains 400 pcs. 1,000 pcs *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Symbol IF VR IFP Pin VL AQW654(A) 50 mA 3V 1A 75 mW 400 V Continuous load current IL 0.12A (0.16 A) Peak load current Power dissipation Total power dissipation Ipeak Pout PT 0.36 A 800 mW 850 mW I/O isolation voltage Viso 1,500 V AC Topr Tstg -40C to +85C -40F to +185F -40C to +100C -40F to +212F Input Output Temperature limits Operating Storage Remarks f = 100 Hz, Duty factor = 0.1% Peak AC, DC ( ): in case of using only 1 channel ) A connection: 100 ms (1 shot), VL = DC Between input and output/between contact sets Non-condensing at low temperatures 581 AQW654 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol LED operate (OFF) current Input LED reverse (ON) current LED dropout voltage Typical Maximum Minimum Typical Typical Maximum IFon (N.O.) IFoff (N.C.) IFoff (N.O.) IFon (N.C.) VF Typical On resistance Ron Maximum Output Off state leakage current Switching speed Transfer characteristics Operate (OFF) time* Reverse (ON) time* I/O capacitance Initial I/O isolation resistance AQW654(A) 0.9 mA 3 mA 0.4 mA 0.8 mA 1.14 V (1.25 V at IF = 50 mA) 1.5 V IL = 120 mA IL = 120 mA IF = 5 mA 10 (N.O.) 11 (N.C.) IF = 5 mA (N.O.) IF = 0 mA (N.C.) IL = 120 mA Within 1 s on time IF = 0 mA (N.O.) IF = 5 mA (N.C.) VL = 400 V 16 (N.O.) 16 (N.C.) Maximum ILeak 1 A Typical Maximum Typical Maximum Typical Maximum Minimum Ton (N.O.) Toff (N.C.) 0.8 ms (N.O.) 1.2 ms (N.C.) 2 ms 0.04 ms (N.O.) 0.36 ms (N.C.) 1 ms Toff (N.O.) Ton (N.C.) Remarks IF = 0 mA 5 mA IL = 400 V IF = 5 mA 0 mA IL = 120 mA Ciso 0.8 pF 1.5 pF f = 1 MHz VB = 0 Riso 1,000 M 500 V DC Note: Recommendable LED forward current IF = 5 mA. *Operate/Reverse time 1) N.O. 2) N.C. Input Input 90% Output 10% Ton Output 10% 90% Toff Toff Ton For Dimensions, see Page 440. For Schematic and Wiring Diagrams, see Page 445. For Cautions for Use, see Page 449. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate (OFF) time vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) 250 4 20 Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) 18 150 100 14 12 10 8 6 50 0 -40 -20 582 16 Operate (OFF) time, ms On resistance, Load current, mA 200 3 2 1 4 Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) 2 0 0 20 40 60 8085 100 Ambient temperature, C -40 -20 0 20 40 60 8085 Ambient temperature, C 0 -40 -20 0 20 40 60 8085 Ambient temperature, C AQW654 4. Reverse (ON) time vs. ambient temperature characteristics 5. LED operate (OFF) current vs. ambient temperature characteristics 6. LED reverse (ON) current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) 1.5 1.0 0.5 0 -40 -20 4 4 3 2 1 0 0 20 40 60 8085 Ambient temperature, C Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) LED reverse (ON) current, mA Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) LED operate (OFF) current, mA -40 -20 7. LED dropout voltage vs. ambient temperature characteristics 8. Voltage vs. current characteristics of output at MOS portion LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 100 1.3 1.2 -3 50mA 30mA 20mA 1.1 -2 50 -1 0 1 2 Voltage, V 3 -50 10mA 5mA 2 1 -40 -20 -40 -20 0 20 40 60 8085 Ambient temperature, C 0 20 40 60 8085 Ambient temperature, C 9. Off state leakage current Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F -100 Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) -150 1.0 0 3 150 Current, mA LED dropout voltage, V 1.4 Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) 0 0 20 40 60 8085 Ambient temperature, C Off state leakage current, A Reverse (ON) time, ms 2.0 Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) 10-3 10-6 10-9 10-12 0 20 40 60 Load voltage, V 80 100 10. LED forward current vs. operate (OFF) time characteristics 11. LED forward current vs. reverse (ON) time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25C 77F 1.2 5 200 3 2 1 0 0.8 0.6 0.4 150 100 50 0.2 0 10 20 30 40 50 LED forward current, mA 9/1/2000 1.0 Output capacitance, pF 4 Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) Reverse (ON) time, ms Operate (OFF) time, ms Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) 0 0 10 20 30 40 50 LED forward current, mA 0 0 10 20 30 40 50 60 Applied voltage, V All Rights Reserved, (c) Copyright Matsushita Electric Works, 583 Ltd. Go To Online Catalog