3.5-8.0 GHz GaAs MMIC Packaged Low Noise Amplifier February 2007 - Rev 08-Feb-07 L1007-QT Features 12 dB Gain 2 dB Noise Figure 3x3 QFN Package Single Power Supply 3-5 V, 40 mA Self Bias On-Chip ESD Protection Circuit Description Mimix Broadband's 3.5 to 8.0 GHz low noise amplifier is packaged in surface mount 3x3 QFN package. The device is a self-biased, single supply design with 12 dB gain and 2 dB noise figure. This MMIC uses Mimix Broadband's 0.25um optical pHEMT process. Absolute Maximum Ratings Supply Voltage RF Input Power Storage Temperature (Tstg) Junction Temperature Operating Temperature +6 V +10 dBm -55 C to +125 C 175 C -40 C to +85C Operation beyond these conditions may cause permanent damage to the device. Electrical Characteristics (T=25C) Parameter Units GHz dB Frequency Range Gain Input Return Loss Noise Figure Output P1dB Output IP3 Supply Voltage dB dBm dBm V Min. 3.5 - Typ. 12 -10 2.0 13 22 3 Max. 8 - Typical Parameters Parameter Frequency Gain IP Return Loss Op Return Loss NF Typical 3.5 13 -15 -7.5 2.2 4 13 -15 -11 1.5 5 12.5 -11 -14 1.8 6 11 -12.5 -15 1.5 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com 7 10 -12.5 -15 1.8 8 7.5 -10 -10 2.4 Page 1 of 7 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 3.5-8.0 GHz GaAs MMIC Packaged Low Noise Amplifier February 2007 - Rev 08-Feb-07 L1007-QT Low Noise Amplifier Measurements XL1007-QT Small Signal Performance 3V, 40mA 20 15 10 5 dB 0 S21 S11 S22 -5 -10 -15 -20 -25 -30 0 1 2 3 4 5 6 7 8 9 10 Frequency (GHz) XL1007-QT Noise Figure 3V, 40mA 4 3.5 Noise Figure, dB 3 2.5 NF 2 1.5 1 0.5 0 4 5 6 7 8 9 10 Frequency (GHz) XL1007-QT Gain Over Voltage 3V, 40mA 16 14 12 S21, dB 10 3V 4V 5V 8 6 4 2 0 2 3 4 5 6 7 8 9 10 Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 7 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 3.5-8.0 GHz GaAs MMIC Packaged Low Noise Amplifier February 2007 - Rev 08-Feb-07 L1007-QT Low Noise Amplifier Measurements (cont.) XL1007-QT OIP3 Vs Frequency 40mA 30 OIP3, dB 25 3V 4V 5V 20 15 10 5 5.5 6 6.5 7 7.5 8 Frequency (GHz) XL1007-QT P1dB Vs Frequency 40mA 16 14 P1dB, dB 12 10 3V 4V 5V 8 6 4 2 0 5 5.5 6 6.5 7 7.5 8 Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 7 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 3.5-8.0 GHz GaAs MMIC Packaged Low Noise Amplifier February 2007 - Rev 08-Feb-07 L1007-QT Evaluation Board Layout Package Pin-out Table Pin Designator 1,2,4,5,6,7,8,9, 11,12,14,15,16 3 10 13 Description NC RF Input RF Output Vd Evaluation Board Schematic Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 7 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 3.5-8.0 GHz GaAs MMIC Packaged Low Noise Amplifier February 2007 - Rev 08-Feb-07 L1007-QT Typical Performance for 3.5 GHz WiMAX Evaluation Board Layout for 3.2 ~ 3.8GHz WiMAX application: XL1007-QT 3V, 40mA with L1= 1.8nH 4 3.5 3 NF (dB) 2.5 2 1.5 1 0.5 0 C1 = 1uF C2 = 1000pF L1 = 1.8nH 2 3 4 5 6 7 8 9 10 FREQ (GHz) XL1007-QT 3V, 40mA with L1= 1.8nH XL1007 WITH 1_8nH Inductor 15 4 12.5 3.5 10 7.5 3 NF (dB) 5 2.5 2 2.5 DB(|S(2,1)|) XL1007_1_8nH 0 DB(|S(1,1)|) XL1007_1_8nH -2.5 1.5 -5 1 -7.5 0.5 -12.5 DB(|S(2,2)|) XL1007_1_8nH -10 -15 0 3.2 3.4 3.6 3.8 4 3.5 GHz 0 1 2 3 4 5 6 Frequency (GHz) 7 8 9 FREQ (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 7 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 10 3.5-8.0 GHz GaAs MMIC Packaged Low Noise Amplifier L1007-QT February 2007 - Rev 08-Feb-07 Package Outline and Assembly PIN 1 INDICATOR A D A2 E 0.00-0.05 A3 NOTE: 1. ALL DIMENSIONS ARE IN mm RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS 1.00 .005 2.00 .05 1.40 .05 (4 SIDES) 4.00 .05 A A3 A2 b K D E e D2 E2 L MIN 0.80 0 0.20 0.20 1.50 1.50 0.16 NOM 0.90 0.20 REF 0.65 0.25 3.00 BSC 3.00 BSC 0.50 1.65 1.65 0.26 MAX 1.00 1.00 0.30 - 1.80 1.80 0.36 PACKAGE OUTLINE 0.30 .005 0.50 BSC Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 7 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 3.5-8.0 GHz GaAs MMIC Packaged Low Noise Amplifier February 2007 - Rev 08-Feb-07 L1007-QT Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260C reflow) "Pb Free" processes. Ordering Information Part Number for Ordering XL1007-QT-0G00 XL1007-QT-0G0T XL1007-QT-EV1 Description Matte Tin finished RoHS compliant 3x3 QFN in bulk quantity Matte Tin finished RoHS compliant 3x3 QFN in tape and reel Evaluation Board We also offer this part with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager for more information regarding different plating types. XL1007-BD-000X Where "X" is RoHS compliant die packed in "V" -vacuum released gel paks or "W" -waffle trays. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 7 of 7 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.