DF11 SERIES 2mm GRID DOUBLE ROW CRIMP TYPE CONNECTORS (APPROVED BY UL-CSA) Scope DF11 series consist of 2mm grid PCB mount plug and 2 per square inch can be increased. ODOF11 series facilitate row crimp type socket for discrete wire. miniature, light weight and low cost designs. Compared to single row (Hirose DF3 series), signal number i f | Se o\ : Py pf Ep yy Features i (1) Increased number of signals per unit area as compared @ SMT pin header with single-row connectors. (1) Uses high-performance nylon insulation, allowing (2) Applicable for AWG22 AWG30 cables. reflow soldering of VPS, IR, and hot air. (3) Reduced man-hours for harnessing by fully automatic (2) Has a gull-wing-shaped lead for easy checking of insulation displacement terminator. contact during soldering. (4) Two types of connectors are available for extension (3) Has an additional semi-fixed reinforcement fitting to connectors, crimp and adapter types. prevent separation of soldered parts due to mechanical (5) Reduced price due to mass production. stress during insertion and extraction. \. J 77Ordering Information r Socket DF11 * DS -2C Series No. C: Crimping | No. of Pin: 4~ 32 Contact Spacing: 2 mm | DS: Double Row Socket Socket Crimp Contact DF11 2428 SCF A ; Type of plating Blank : Tin-plated C_: Gold-plated (0.2um thick) SCF: Chain SC : Bulk Applicable Cable Size AWG #24 ~ #28 Receptacle DF11 * DS-2V DSA: Straight Dip Type No. of Pin: 4~ 40 V: Straight SMT j Contact Spacing: 2 mm | DS: Double Row Socket |7 @ Pin Header DF11 + DP ~ 2 DSA Series No. No. of Pin: 4~ 32 Extension plug Type of Termination DSA: Straight Dip Type DF 11* DEP-2 C Series identifier Series No. No. of pins: 4 to 32 @ Crimp connector for extension plugs DF 11-EP [een Mark of crimp connectors for extension Electrical Performance Item Conditions Standard value For AWG #24 2A | Rated current (Note 1) For AWG #26 2A For AWG #28 1A Rated voltage _ 250VAC Insulation resistance DCcs00V Min, 1000M2. Withstand voltage At standard value 650VAC Contact resistance Atga.1 ADC 30m2 or less Note 1: The standard current cepecity varies according to the size of the cable to which the connector is connected. Standard approved by UL. CSA Safety Standard Rated voltage 30VAC AWG #30 O.5A ANG #24 #28 1A Rated current AWG #22 2A File Na, UL : 62653 CSA : LR96109 2428 PCF | DS : Right Angle Dip Type V: Straight SMT Contact Spacing: 2 mm | DP: Double Row Pin Header | C: Crimp A: Adapter Contact spacing: 2 | Double-row extension plug | PCF : Continuous reel connector PC : Loose connector Applicable cable size AWG#24 #28 Material & Finish Product Part Material Finish UL standard insulator . Palymide cesin Dip: Black UL94aV_-0 Pin header - += we Connector ' Brass Tin-plated ~ Socket Insulator Polyamide rasin Black UL94V-0 Socket crimp connector | Connector | Phosphor bronze Tin-plated - Insulation displacement |_ Insulator . Polyamide resin Black UL94V0 termination socket Connector | Phosphor bronze | Tin-plated - Insulator Polyamide rasin Dio : Black , UL94V-0 Receptacle po. 4. . : ge Connector | Phosphor bronze | Tin-plated =~ ~ Extension plug Insulator Polyarnide resin Black UL94-0 Plug crimp connector Connector | Phosphor bronze | Tin-plated ~ Insuiator Polyamide resin Black ULS4V-0 Extension adapter - Cannector | Brass Tin-plated { - 7980 Doble Row IDC Soket This photograph shows the engaged pins. @ Applicable cable Ei-4 EE : , No.1 / Note I Indicate terminal No. 1 CAV No. Note 1: R26 and R28 identification mark (white) provided for R28 only. Suffix | Applicable cable | Core configuration | Cable diameter Note 2: One square hole indicates odd rows, and 0 . R26 | UL1061 AwG26 710.16 0.95 1.05 Note 3: Ne. of pins noe" inthe wable indicates 32 R28 | UL1061 AWG28 7/0.17 0.85 0.95 Pins. Note 4: Use the following types of dip-type header. e Straight-type: DF11DP2DS (08) e Angle-type: DF11+#DP2DS (24) Socket @ AWG 4 26 Unit: mm @ AWG #28 Unit: mm HRS No Part No pn A B HRS No. Part No. wna A B 543 0652 0 peu aps are | 4 | 6 | 2 | 543 0667 8 =| DFIL 4DS 2R28 4 6 2 | 543 06533. | DEI 6S 2R2 | 6 CU] GC 543 0668.0 | DEI 6DS 2R28 6 8 4 543 0654.6 | DFIL aps 2r2 | 8 | 0 |g 543 0669 3 | DEM 8DS 2R28 8 | 10 6 | 543 06559 | PFI 10DS 2R26 1 | i |B | 543 0670 2 DF 11 10DS 2R28 lo | 2 8 | 543 0656.1 | DEI 12D8 2R26 2 | 14 | 40 | | 543 0671 5 DFI1 12DS-2R28 2 | 44 10 | 543 0657 4. |S DFII 14S 2R26 4] 6 | ode 543 0672 8 DF11 14DS 2R28 4 16 12 | 543 0658 7 DF11 16DS 2R26 16 | 18. M4 543 0673 0 DF11 16DS 2R28 16 18 14 | 543 0659 0 DFIL 18DS 2R26 18 20 16 $43 0674 3 DF11 18DS 2R28 18 20 16 | 543 0660 9 DF11 20DS 2826 20 | 22 18 543. 0675 6 DF11 20DS 2R28 20 22 18 | 543 0661 1 DFH 22DS 2R26 22 24 20 | | 543 0676 9 DFI 22DS 2R28 22 24 20 543 0662 4 DF11 24DS 2R26 24 26 22 543 0677 1 DF11 24DS 2R28 24 26 22 | 543 06637 | DF -26DS 2R26 26 28 24 | 543 0678 4 DF11 26DS 2R28 26 28 24 "543 06640 | ~=DF1L 28DS 2R26 28 | 30 26 F543 0679 7 DF11 28DS- 2R28 28 30 26 | 543 0665 2 DFL 30DS 2R26 30 32 28 | 543 0680 6 DF11 30DS 2R28 30 32 28 | 543 0666 5 DF 11 32DS 2R26 32 34 30 643 0681 9 DFI1 32DS 2R28 32 34 | 30 Note: The products in the above table are for desktop insulation displacement termination, and are available in packs of 100 sockets. Products for fully automatic insulation displacement terminators are available in magazine packs with HRS numbers followed by the suffix (20).{ QUANTITY IN DF11 Quanity in No. of Pins | magazine (pieces) 4 188 6 140 8 112 10 94 12 80 14 70 16 62 18 56 20 50 22 46 24 42 26 40 28 36 30 34 32 32 Note: Order by an integer multiple of the quantity packed in a magazine. *DS2R MAGAZINE # APPLICATION DRAWING DFIL * DP 2DSA08) DF1L DS 2R26 DF1l #DEP 2A DFIL #DS 2R 26 (fixed side) = DF11*DS2R INSULATION DISPLACEMENT TERMINATOR 14.2 Item HRS No. Product No. Features Fully automatic insulation displacement terminator AM700/DF11 Applicable type of harness @) DF11-both ends, one end @ DF11-DF11 branch @) DF11-DF3 branch Applicable harness length 100 2000mm Fitted with a conductivity tester. Desktop insulation displacement terminator $A700/DF 11 Touch sensor Note: Follow the Instructions on DF11*DS2R Insulation Displacement Connectors when terminating insulation displacement connectors. DF1IL *DP 2DS(24)} DFU #DS 2R26 (insertion & extraction side) 81Double Row Socket < AU, - B | No. 2 2.0 a e|2 Ln nt No. 1 . HE Polarizing Mark / \ CAV.No. - fo] FoF ou yt [ pall Eel Ee ar) Note: 4 positions socket has 1 polarizing kay at center. Other positions socket have 2 polarizing key as per drawing. Unit: mm HRS No Part No. Mint A B 543-0568-6 DF11-4DS-2C 4 6.0 2.0 543- 0502-8 DF11-6DS-2C 6 8.0 4.0 543 0503-0 DF11- 8 DS-2C 8 10.0 6.0 543-0504 -3 DF11-10DS- 2 C 10 12.0 8.0 543 -0505-6 DF11-12DS-2C 12 14.0 10.0 543 -0506-9 DF11-14DS- 2C 14 16.0 12.0 543-0507-1 DF11-16DS-2C 16 18.0 14.0 543 -0508-4 DF11-18DS-2C 18 20.0 16.0 543-0509-7 DF11-20DS-2C 20 22.0 18.0 543-0510--6 DF11-22DS- 2 C 22 24.0 20.0 543-0511-9 DF11-24DS- 2 C 24 26.0 22.0 543-0512-1 DF11-26DS- 2 C 26 28.0 24.0 543-0513-4 DF11-28DS- 2C 28 30.0 26.0 543-0514-7 DF11-30DS- 2C 30 32.0 28.0 543-0515-0 DF11-32DS- 2 C 32 34.0 30.0 Note: The minimum ordering quantity is one package (containing 100 pieces). Order in multiples of 100. - mW 7")Receptacle (Dip) \ CAV.No. Note 1: Applicable PCB hole dimension: $0.8 ~ 0.9 mm Note 2: Applicable PCB hole dimension for kinked pin. Unit: mm HRS Na Part No. \. ie | A B 543-0553-9 | DF11-6DS 2DSA, 6 | 8 | 4 543 0554-1|DF11-8DS 2DSA} 8 | 10 | 6 543 0555 4| DF11-10DS 2pSA_| 10 | 12 | 8 | 543 0556 7|DF11-12DS 2DSA, 12 | 14 | 10 543 0557-0| DF11-14DS 2DSA| 14 / 16 | 12 543-0558-2| DF11-16DS-2DSA | 16 | 18 | 14 543 0559 5| DF11 18DS 2DSA_ 18 | 20 | 16 543 0560 4| DF1l 20DS 2pDSA | 20 | 22 | 18 543 0561 7 | DF11 22DS 2DSA 22 24 20 543-0562-0 | DF11 24DS 2DSA| 24 | 26 | 22 543 0563 2/DF11 26DS 2DSA| 26 | 28 | 24 543 0565 8 DFU 30DS 2DSA | 30 [32 28 543 0564 5 DFIL 28DS- 208A 28 30 26 543 0566 0| DF11 32DS 2DSA__ 32 34 30 * (01) specification: Gold-plated (0.2um) headers available. Note: The minimum ordering quanity is one package (containing 100 pes.). 90.8 ~ 0.85 mmStraight Pin Header (SMT) 84 Unit: mm HRS Na PartNo. |"ec'| A | B | C | D | intiencene 543-0585-5-20 | DF11-4DP-2vi2)] 4] 2/8.5| 4.5| 8.7] 41 543-0586-8-20 | DF11-6DP-2V(20)| 6 | 4 [10.5] 6.5/10.7| 35 $43-0587-0-20 | DF11 8DP 2v(20)| 8 | 6 12.5] 8.5/12.7| 30 543-0588-3-20 | DF11 1oDP av(2zo) | 10 | 8 |14.5/10.5]14.7| 27 543-0589-6-20 | DF11 120P 2v(20) | 12 | 10 /16.5|12.5/16.7] 24 $43-0590-5-20| DFI1 14DP 2v(20) | 14 | 12 |18.5/14.5/18.7] 22 543-0591 -8-20 | DF11 16DP 2V(20) | 16 | 14 |20.5/16.5]20.7| 20 543-0592-0-20| DFI1 18DP-2v(20) | 18 | 16 [22.5/18.5/22.7] 18 543-0593-3-20 | DF11 20DP-2v120) | 20 | 18 |24.5/20.5/24.7| 17 543 0594 6-20 | DFit 22DP-2vi20) | 22 | 20 |26.5/22.5/26.7| 16 543-0595-9-20 | DFin 2aDP-2vi20) | 24 | 22 |28.5/24.5/28.7| 15 543-0596-1 20} DFI1 26DP-2vi20) | 26 | 24 |30.5/26.5/30.7| 14 543-0597 4 20| DFiL 2DP 2v(20) | 28 | 26 |32.5/28.5/32.7| 13 543-0598-7-20 | DF1l 30DP-2v(20) | 30 | 28 |34.5/30.5/34.7| 12 543-0599-0-20 | DFI-32DP-2vi20) | 32 | 30 |36.5/32.5/36.7| 12 543-0600-7-20 | DF11 49DP-2vi20) | 40 | 38 [44.5/40.5/44.7] 10 * (50) specification: Gold-plated (0.2m) headers available. The headers are packed in magazines for delivery. Orders should be for an integer multiple of headers packed in a magazine. Recommended PCB Layout At0.1 1.1+0.1 oS 4H N Lo thy 2 Y a o +4 N c+0.1 2+0.1 D 2+0.1 y Note: 2 Patterns in the hatched area may contact the connectors if no insulation coating is applied. Be sure to apply insulation coating.Double Row Pin Header, Straight Type f ~ No. 1 Polarizing Mark 218 = ofet on _ 0.50.5 ud LT R A Note 1: PCB through hole dimension: $0.87"! Indicates No. of Pin | '. CAV.No. Unit: mm HRS No Part No. rion A B 543-0517-5 | DF11-4DP-2DSA | 4 6.0 2.0 543-0518-8 | DFI1-6 DP-2DSA | 6 8.0 4.0 543-0519-0 | DF11- 8 DP-2 DSA 8 10.0 6.0 543-0520-0 | DF11-10DP-2DSA | 10 | 12.0 8.0 43-0521-2| DF11-12DP-2DSA | 12 | 14.0 | 10.0 43-0522-5 | DF11-14DP-2DSA | 14 | 16.0 | 12.0 543-0523-8 | DF11-16DP-2DSA | 16 | 18.0 | 14.0 543-0524-0 | DF11-18DP-2DSA | 18 | 20.0 | 16.0 543-0525-3 | DF11-20DP-2DSA | 20 | 22.0 | 18.0 543-0526-6 | DF11-22DP-2DSA | 22 | 24.0 | 20.0 543-0527-9 | DF11-24DP-2DSA | 24 | 26.0 | 22.0 543-0528-1 | DF11-26DP-2DSA | 26 | 28.0 | 24.0 543-0529-4 | DF11-28DP-2DSA | 28 | 30.0 | 26.0 543-0530-3 | DF11-30DP-2DSA | 30 | 32.0 | 28.0 543-0531-6 | DF11-32DP-2DSA | 32 | 34.0 | 30.0 * (01) specification: Gold-plated (0.2m) models available. (08) specification: Headers with low insertion/ force available. Note: The minimum ordering quantity is one pack containing 100 connectors.Double Row Pin Header, Angle Type 0.50.5 24 Loy a 1 ! No. 2 ait iInd ' No. 1 -> | St HE o} 6) S| 44 i t We (Note 1) PCB through hole dimention 90.873" Indicates No. of Pin / Unit: mm HRS No Part No, Mie | A |B | temas | | 543 0533 1 22 DFU _4DP 2pS(22)] 4 60! 20) wv | 543 0534 4 22/DFI1 6DP 2pSi22)/ 6 | 8.0 | 4.0 61. 543 0535 7 22! DF11 8 DP 2b$i22)| 8 | 10.0 | 6.0 | 48 543 0536 0 22 [pri 1opP opsiza)| 10 | 12.0 | 8.0 | 40 543 0537 2 22|DFI1 12DP 2DS(22)| 12 | 14.0 | 10.0 | 34 543 0538 5 22 JDFH 14DP 2bS(22)| 14 | 16.0 | 12.0 30 543 0539 8 22|DF11 16DP 2pSi22)| 16 | 18.0 | 14.0 a7 643 0540 7 22 | DFIL 18DP 2DS(22)| 18 | 20.0 | 16.0 24 543 0541 0 22 [DF11 20DP 2pSi22)| 20 | 22.0 | 18.0 22 543 0542 2 22 | DFIL 22DP 2DS(22)| 22 | 24.0 | 20.0 20 543 0543 5 22 | DFIL 24DP 2DS(22)| 24 26.0 | 22.0 | 18. 543 0544 8 22, DF11 26DP 2DS(22), 26 | 28.0 | 24.0 7 543 0545 0 22 | DEI 280P 2p8(22)| 28 | 30.0 | 26.0 16 ) 543 0546 3 22 DFI1 30DP 2pS(22)| 30 | 32.0 | 28.0 | 15. 543 0547 6 22 |DF11 32DP 20S(22)| 32 | 34.0 | 30.0 | 14 * (52) specification: Gold-plated (0.2m) models available. (24) specification: Headers of low insertion/extraction force available. Note: The headers are packed in magazines for delivery. Orders should be for an integer multiple of headers packed in a magazine.Receptacle (SMT) Unit: mm HRS Na PartNo. |"2f A | B | C | D | mitemeune 543 0569 9 20| DF 4DS 2vi20)} 4 | 2) 8.5) 4.5) 8.7] 41 543 0570 8 20] DF11 6DS 2viz0i] 6 | 4 /16.5] 6.5]10.7) 35 543 0571 0 20) DFI1 8DS 2v.20!| 8 | 6 |12.5) 8.5]12.7) 30 543-0572 3 20} DFM 10DS 2vi20)| 10 | 8 |14.5)10.5]14.7] 27 543 0573 6 20] DFM 12DS 2vi20)| 12 | 10 |16.5/12.5]16.7] 24 543 0574.9 201 DFI1 MDS 2vi201] 14 | 12 ]18.5)14.5]18.7] 22 543-0575 1-20} DF11 16DS 2Vi20)| 16 | 14 |20.5/16.5/20.7] 20 543 0576 4 20| DF11 18DS-2Vi20) | 18 | 16 |22.5/18.5/ 22.7] 18 543-0577 7-20 | DFM-20DS-2Vi20)| 20 | 18 )24.5]20.5/ 24.7] 17 543-0578 -0-20 | DF11-22DS-2V:20)| 22 | 20 )26.5|22.5/26.7| 16 543 0579 2 20) DF11-24DS-2V.20)| 24 | 22 |28.5/24.5128.7| 15 543-0580-1-20|/ DFil 26DS 2Vi20)) 26 | 24 )30.5]26.5/30.7| 14 543 0581 4 20) DF11 28DS 2vi20)| 28 | 26 |32.5/28.5/32.7] 13 543 0582 7 20| DF11 30DS 2v/20}| 30 | 28 |34.5/30.5/34.7| 12 543 0583 0 20| DF11-32DS 2V:20)| 32 ) 30 |36.5/32.5/36.7| 12 543 0584 2 20| DF11 40DS 2v/20)| 40 | 38 /44.5/40.5/44.7] 10 \ Recommended PCB Layout A+0.1 2+0.05 Bit0.. & + N S sabe Zs +H 9s +H nN C+0.1 2+0.1 D 2+0.1 Note: 7 Patterns in the hatched area may contact the connec- tors if no insulation coating is applied. Be sure to apply insulation coating. * (50) specification: Gold-plated (0.2m) models available. Note: The headers are packed in magazines for delivery. Orders should be for an integral multiple of headers packed in a magazine. 87Extension plug { = Panel through hole dimensions for extension plugs ~ ~~ . Panel Note 1 Note 1: The engaging corners in the panel must be sharped-edged (without R). Note 2: Applicable panel thickness (1.6 1.0mm). (Some play will result when the plugs are engaged with a panel that is not 1.6 or 1.2mm thick.) Unit: mm HRS No. Part No. No.of A B Cc D E F 543-0619-5 DF11 4DEP-2C 4 7 9.2 2 94 | 6.3 543-0620 4 DFIl 6DEP 2c | 6 13 11.2 8 4 4 8.3 | 543 0621-7 DFI 8DEP 2C 8 15 13.2 10 6 13.4 | 10.3 543-0622-0 | DFII-10DEP-2C 10 7 | 15.2 12 8 15.4 | 12.3 543 0624-5 | DFII-14DEP-2C 4 21 | (19.2 16 12 19.4 | 16.3 543 0625-8 DF11-16DEP-2C 16 23 | a2! 48 1 | ata | 18.3 543 0626-0 DF11-18DEP-2C 1B 2 | (23.2 | 20 i | 23.4 | 20.3 543 0627-3. | DFI1-20DEP-2c 2 | 27 | 25.2 | 22 1 | 25.4 | 22.3 543 0628-6 DF11-22DEP 2C 22 29 | 27.2 | 24 20 | 27.4 | 24.3 543-0629-9 DEN. 24DEP 2C 24 31 29.2 | 26 22 | 29.4 | 26.3 543-0630-8 | DFIL-26DEP 2c | 2 | 33 | 31.2 | 28 24 6] 31.4 | 28.3 543-0631-0 | DF 28DEP 2C 28 3 6| 633.2 | 30 26 | 33.4 | 30.3 543 0632 3 | DFIL-30DEP 2C | 30 a7 | 35.2 | 32 | 28 | 35.4 | 32.3 543-0633 6 DF11-32DEP- 2C 32 39 | 37.2 | 34 30 | 37.4 | 34.3 Note: The minimum ordering quantity is one pack containing 100 connectors. \ Order in multiples of 100. SS) 88Extension Adapter \ . 4 o-4 it = Panel through hole dimensions for extension adapters E?! hw pia Sa o| 2.521) pee ; 7 r Ly aren \_ Panel Note 1 | Note 1: The engaging corners in the pane! must be sharp-edged (without R). Note 2: Applicable panel thickness (1.6 1.0mm). (Some play will result when the adapters are engaged with a panel that is not 1.6 or 1.2mm thick.) SITES Unit: mm HRS No. Part No. No. of A B C D E F 543 06981 | DFIl 4DEP 2A 4 lt 9.2 6 2 9.4 3 543 0699 4 DF 6DEP 2A 6 13 | 11.2 8 4 ua | 83 543 0700 1 DFIl 8DEP 2A 8 15 13.2 10 6 13.4 | 10.3 543 O701 4 DF11 10DEP 2A 10 v7 | is] a2 8 | 15.4 | 12.3 543 0702 7 DF 12DEP 2A | 12 19 17.2 | 14 10 | 74 | 14.3 543 0703 0 DFI 1M4DEP 2A 4 21 19.2 | 16 2 | 194 | 16.3 543-0704 2 DF11 16DEP 2A 16 23 | 21.2] 18 4 | ata | 183 543 0705 5 DF1l 18DEP 2A 18 25 | 23.2 | 20 is | 23.4 | 20.3 543 0706 8 DF11 20DEP-2A 20 a7 | 25.2 | 22 is | 25.4 | 22.3 543 0707 6 DF 22DEP 2A 22 29 | 27.2 | 24 20 | 27.4 | 24.3 543 0708 3 DF11 24DEP: 2A 24 31 29.2 | 26 22 | 29.4 | 26.3 543 0709 6 DF1l 26DEP 2A 26 33 31.2 | 28 | 24 31.4 | 28.3 543 0710 5 DF11 28DEP 2A 28 35 | 33.2 | 30 26 | 33.4 | 30.3 543 O71 8 DF11 30DEP 2A 30 37 | 35.2 | 32 2 | 35.4 | 32.3 543 0712 0 DF11-32DEP 2A 32 39 | 37.2 | 34 | 30 | 37.4 | 343 | Note: The minimum ordering quantity is one pack containing 100 connectors. Order in multiples of 100. errr =a" Pat hee en baw 89( esoxet crimp terminal 9.9 0.7 on <_-- 3.0 0.9 0.9 1305 HRS No. Part No. Type Quantity Finish | 54306010 DF11-22SCF Reet terminal 10,000 connectors par reet 543 0602-2 DF11-225C Loose piece terminal | 100 connectors per pack 543-0500-2 | DF112428SCF | Reel terminal 10,000 connectors per rae! Tin-piated | 54305015 | OF11-2428SC _| Lowe piece terminal 100 connectors per pack 5430605-0 | DF11-30SCF Real terminat 10,000 connectors par reel | 54306063 | DF11305C Loove piece terminal 100 connectors per pack 543-06035 | DF11-22SCFA_ | Reet terminal 10,000 connectors per reel 543-0604a | DF11-225CA Loose piece terminat 100 connectors per pack 54305500 | DF112428SCFA| Real terminal 10,000 per reel | Gold-plated 543-0551-3 | OF 11-242BSCA | Loose piece terminal 100 connectors per pack (0.2um) 543--06076 | DF11-30SCFA | Resi terminal 10,000 connactors per reel 54306089 | DF11-30SCA _| Loose piece terminal 100 connectors per peck @ Crimp terminal extractor DF-CPO (B) @ Recommended cables: UL1061, UL1007 Applicable cables Wire size (core configuration) AWG #22 (17 cores/0.16mm) AWG #24 (11 cores/0.16mm) AWG #26 ( 7 cores/0.16mm) AWG #28 (7 cores/0.127mm) AWG #30 ( 7 cores/0.1 mm) _ Cable diameter 91.2 91.45mm 90.9 91.45mm 90.75 61.2mm (Tin-plated annealed copper wire.) Strip length: 1.7 2.3mm @ Crimp terminal for extension plugs Note: When using s cable other than the applicable ones, contact our sales department. HRS No. Part No. 54306154 | OF 11EP2428PCF | Reel termina! 543-0616-7, DF17EP2a28PC | Loose piece terminal | Type Quantity | 10,000 connectors per reel | 100 connectors per pack Finish Tin-plated @ Crimp terminal extractor DF CPO (B) @ Recommended cables: UL1061, UL1007 Applicable cables Wire size (core configuration) AWG #24 (11 cores/0.16mm) | AWG #26 ( 7 cores/0.16mm) AWG #28 (7 cores/0.127mm) Cable diameter 90.9 $1.45mm (Tin-Plated annealed copper wire.) @ Strip length: 1.9 2.3mm Note: @ Applicable crimping tools When using a cable other than the applicable ones, contact our sales department. Type HRS No. Part No. Applicable contacts Remarks Manual crimping tools 5500228-6 DF11TA22HC DF1122SC(A) 55001974 DF11--TA2428HC DF112428SC(A) 550-02308 DF11TA30HC DF1130SC(A) 5500227-3 OF11EPTA2428HC DF 11EP2428PC Automatic crimping toal 901-00054 CM105 Above reel terminals Change applicator 90(. PACKAGING TEMPERATURE PROFILE Reflow temperature profile recommended in DF11 Peak temperature fo 300% FE - - - - - - - IR reflow conditions @ Peak temperature 23575 C 10 seconds or less @ At 220C or more 10 secondsor more 30 seconds or less @ Preheating time 150C 100 120 seconds 200% J- - - we - ~ ' Preheating time [er ce oe , | 150C 100% ov i { l 0Sec 30Sec 50Sec 100Sec @ Application DEE @ DS 2 / PCB | | 150Sec 200Sec Board-to-board dimensions for combination of DF11 series boards and board connectors. Unit: mm 'N \ Y oe _ | Receptacte as ee DF1i1*DS2DSA | DF11-DS2V (Dip type) {SMT type) OF 11+DP-2DSA (Dip type) 78 7.55 Pin Header 11 RP oy - DF11DP-2vV (SMT type} 8.45 82 \ \ PCB \pr il apr ev An example of connection. 91