AMC DOC. #: AMC79L05_D (LF) March 2004 ADD MICROTECH CORP. AMC79L05 100mA / 3-TERMINAL NEGATIVE VOLTAGE REGULATOR DESCRIPTION FEATURES The AMC79L05 is a 3-terminal fixed negative-voltage designed for a wide range of applications. This regulator can provide local on card regulation, eliminating the distribution problems associated with single point regulation. In addition, it can be used with power-pass elements to make high-current voltage regulators with 100mA output current. Protection features such as thermal shutdown and current limiting have been designed internally which will protect the device from damage in case of overload or overheating. APPLICATIONS 5% tolerance of output voltage Wide input range Internal thermal overload protection Output current > 100mA No External Components Short circuit protection Available in 3L plastic TO-92 and plastic 8 pin S.O.I.C. Identical pin assignment to earlier 79L05 series. PACKAGE PIN OUT Logic Systems Computer Add-On Cards Modem Cards Power Suppliers OUTPUT INPUT COMMON 3-Pin Plastic TO-92 (Top View) OUTPUT NC INPUT INPUT INPUT INPUT NC COMMON 8-Pin S.O.I.C Surface Mount (Top View) ORDER INFORMATION Plastic SO-8 Plastic TO-92 LP DM TA (OC) 8-pin 3-pin 0 to 70 AMC79L05LP AMC79L05DM 0 to 70 AMC79L05LP(Lead Free) AMC79L05DM(Lead Free) Note: 1.All surface-mount and TO-92 packages are available in Tape & Reel. Append the letter "T" to part number (i.e. AMC79L05LPT or AMC79L05DMT). 2.For TO-92 in Tape & Box (without reel), add suffix "TB" (i.e. AMC79L05LPTB). 3.The letter "F" is marked for Lead Free process. Copyright 2002, ADD Microtech Corp. 1 www.addmtek.com AMC79L05 AMC DOC. #: AMC79L05_D (LF) March 100mA / 3-TERMINAL NEGATIVE VOLTAGE REGULATOR 2004 ABSOLUTE MAXIMUM RATINGS (Note 1) -30V Input Voltage 0OC to 70 OC Operating free-air temperature range, TA Storage temperature range -65OC to 150OC Lead temperature (soldiering, 10 seconds) 260 OC Note 1: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground. Currents are positive into, negative out of the specified terminal. THERMAL DATA LP PACKAGE: Thermal Resistance-Junction to Ambient, JA DM PACKAGE: Thermal Resistance-Junction to Ambient, JA Junction Temperature Calculation: TJ = TA + (PD x JA). The JA numbers are guidelines for the thermal performance of the device/pc-board system. All of the above assume no ambient airflow. Copyright 2002, ADD Microtech Corp. 2 156 OC/W 165 OC/W www.addmtek.com AMC79L05 AMC DOC. #: AMC79L05_D (LF) March 100mA / 3-TERMINAL NEGATIVE VOLTAGE REGULATOR 2004 Input Voltage Output Current RECOMMENDED OPERATING CONDITIONS Recommended Operating Conditions Parameter Symbol Min. Typ. Max. VI -7 -20 IOUT 100 Operating Virtual Junction Temperature TJ 0 Units V mA O 125 C ELECTRICAL CHARACTERISTICS Unless otherwise specified, these specifications in bold type apply over the operating temperature range of 0OC TJ +150OC, VIN = -10V,IOUT = 40mA,CIN = 0.33F, COUT= 0.1F, and are for DC characteristics only. (Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.) AMC79L05 Parameter Symbol Test Conditions Units Min. Typ. Max. Output Voltage VOUT Line Regulation VOI Load Regulation VOL Peak Output Current Dropout Voltage IPEAK Quiescent Current IQ Quiescent Current Change IQ Ripple Rejection ( note 2 ) RR Output Noise Voltage ( note 2 ) VO RMS note 2: TJ = 25 OC -7V VIN -20V, 1mA IOUT 40mA 1mA IOUT 70mA -7V VIN -20V,TJ = 25 OC -8V VIN -20V,TJ = 25 OC 1mA IOUT 100mA, TJ = 25 OC 1mA IOUT 40mA, TJ = 25 OC TJ = 25 OC TJ = 25 OC TJ = 25 OC TJ = 125 OC -8V VIN -20V 1mA IOUT 40mA f =120Hz, -8V VIN -18V, TJ = 25 OC 10Hz f 100KHz, TJ = 25 OC -4.8 -4.75 -4.75 -5.0 15 20 10 140 1.7 -5.2 -5.25 -5.25 150 100 60 30 49 40 mV mV mA V 6.6 6.0 1.5 0.1 41 V mA mA dB V These parameters, although guaranteed, are not 100% tested in production prior to shipment Copyright 2002, ADD Microtech Corp. 3 www.addmtek.com AMC79L05 AMC DOC. #: AMC79L05_D (LF) March 100mA / 3-TERMINAL NEGATIVE VOLTAGE REGULATOR 2004 3-Pin Plastic TO-92 INCHES MIN B TYP MILLIMETERS MAX MIN TYP MAX A 0.175 0.180 0.205 4.45 4.57 5.21 B 0.170 0.180 0.210 4.32 4.57 5.33 C 0.125 0.142 0.165 3.18 3.62 4.19 K M A G F C F - 0.015 - - 0.38 - G - 0.050 - - 1.27 - J - 0.150 - - 3.81 - 0.500 0.580 - 12.70 14.73 - K N Note: For TO-92 in tape & reel, refer to TO-92 package and carrier dimension data for lead dimensions. M - 5 - - 5 - N - 5 - - 5 - 3-Pin Plastic TO-92 Package (Taped and Reeled) and Carrier Dimensions P P1 INCHES MIN TYP MAX MIN TYP MAX - - 2.00 - - 0.480 0.500 0.520 12.2 12.7 13.2 Po 0.488 0.500 0.512 12.4 12.7 13.0 Do 0.150 0.157 0.165 3.8 4.0 4.2 P1 0.230 0.250 0.256 5.85 6.35 6.85 Fo 0.165 0.197 0.220 4.2 5.0 5.6 W 0.669 0.709 0.748 17.0 18.0 19.0 Ho 0.610 0.630 0.649 15.5 16.0 16.5 Wo 0.224 0.236 0.248 5.7 6.0 6.3 W1 0.335 0.354 0.374 8.5 9.0 9.5 C C 0.079 Ho W1 P Wo W F1 Do Po Fo MILLIMETERS Note: For 3L TO92, 2,000 units per Reel Copyright 2002, ADD Microtech Corp. 4 www.addmtek.com AMC79L05 AMC DOC. #: AMC79L05_D (LF) March 100mA / 3-TERMINAL NEGATIVE VOLTAGE REGULATOR 2004 8-Pin Plastic S.O.I.C. INCHES MIN TYP MAX MIN TYP MAX A 0.183 - 0.202 4.65 - 5.13 B 0.144 - 0.163 3.66 - 4.14 C 0.068 - 0.074 1.73 - 1.88 D 0.010 - 0.020 0.25 - 0.51 F - 0.035 0.38 - 0.89 A B P F D G C SEATING PLAN K M J Note: for 8 pin S.O.I.C., 100 units per tube Copyright 2002, ADD Microtech Corp. 0.015 G L 5 MILLIMETERS 0.050 BSC 1.27 BSC J 0.007 - 0.010 0.19 - 0.25 K 0.005 - 0.010 0.13 - 0.25 L 0.189 - 0.205 4.80 - 5.21 M - - 8 - - 8 P 0.228 - 0.244 5.79 - 6.20 www.addmtek.com AMC79L05 AMC DOC. #: AMC79L05_D (LF) March 100mA / 3-TERMINAL NEGATIVE VOLTAGE REGULATOR 2004 IMPORTANT NOTICE ADD Microtech (ADDM) reserves the right to make changes to its products or to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe property or environmental damage. ADDM integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life-support applications, devices or systems or other critical applications. Use of ADDM products in such applications is understood to be fully at the risk of the customer. In order to minimize risks associated with the customer's applications, the customer should provide adequate design and operating safeguards. ADDM assumes to no liability to customer product design or application support. ADDM warrants the performance of its products to the specifications applicable at the time of sale. U.S. Asia Pacific region ADD Microtech Inc. 492 Altamont Drive Milpitas, CA 95035 ADD Microtech Corp 13F, NO. 287, Sec. 3, Nan Jing E. Rd., Taipei, Taiwan 105 T E L : (408) 9410420 F A X : (408) 9410864 T E L : 2-27132800 F A X : 2-27132805 Copyright 2002, ADD Microtech Corp. 6 www.addmtek.com