SENSITRON SEMICONDUCTOR Data sheet 1425, Rev. A KBPC1000S-G - KBPC1010S-G 10A IN-LINE BRIDGE RECTIFIER Green Products Features Diffused Junction Low Forward Voltage Drop A High Current Capability KBPC-S High Reliability Dim Min Max Min Max High Surge Current Capability A 28.40 28.70 1.12 1.13 Ideal for Printed Circuit Boards B 10.97 11.23 0.432 0.442 Designed for Saving Mounting Space %&'223064 -~ ~ + C 13.90 $ !" -- 0.547 -- D 19.10 -- 0.752 -- Green Products in Compliance with the RoHS Directive E 5.10 -- 0.201 -- 0.047 OTypical 3.05 0.120 3.60 0.142 In mm In inch Mechanical Data C G 1.20 O Typical Case: Epoxy Case with Heat Sink Internally Mounted in the Bridge Encapsulation Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: As Marked on Body Weight: 30 grams (approx.) Mounting Position: Any Marking: Type Number D H EE METAL HEATSINK G B H Maximum Ratings and Electrical Characteristics @TA=25C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TA = 50C KBPC KBPC KBPC KBPC KBPC KBPC KBPC 1000S-G 1001S-G 1002S-G 1004S-G 1006S-G 1008S-G 1010S-G Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 10 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 200 A Forward Voltage (per element) @IF = 5.0A VFM 1.2 V Peak Reverse Current At Rated DC Blocking Voltage @TA = 25C @TA = 100C IR 10 1.0 A mA Rating for Fusing (t < 8.3ms) (Note 1) I2t 374 A2s Typical Thermal Resistance (Note 2) RJC 2.0 K/W RMS Isolation Voltage from Case to Lead VISO 2500 V Tj, TSTG -55 to +150 C Operating and Storage Temperature Range Note: 1. Non-repetitive for t > 1ms and < 8.3ms. 2. Thermal resistance junction to case per element mounted on 8" x 8" x 25" thick AL plate. * ! ! !!"#$* * % & '(&)*+,,---. & ./0*12&%# %3 & ./0* S-G S-G 1425, A Green Products IF, INSTANTANEOUS FORWARD CURRENT (A) 20 IF, AVERAGE FORWARD CURRENT (A) Mounted on a 220 x 220 x 50 mm AL plate heatsink 15 10 100 10 1.0 5 Resistive or Inductive load 0 0 25 50 75 100 125 0.1 Tj = 25C Pulse Width = 300s 0.01 150 0 0.8 1.0 1.2 1.4 1.6 1.8 1000 Single Half-Sine Wave (JEDEC Method) f = 1 Mhz Tj = 25C 300 Cj, CAPACITANCE (pF) IFSM, PEAK FWD. SURGE CURRENT (A) 0.4 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) TA , AMBIENT TEMPERATURE (C) Fig. 1 Forward. Current Derating Curve 400 0.2 200 100 100 Tj = 150C 0 1 10 100 10 0.1 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance (per element) IR, INSTANTANEOUS REVERSE CURRENT (A) NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Surge Current 100 Tj = 125C 10 1.0 0.1 Tj = 25C 0.01 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics (per element) * 221 West Industry Court ! Deer Park, NY 11729-4681 ! (631) 586-7600 FAX (631) 242-9798 * * World Wide Web Site - http://www.sensitron.com * E-Mail Address - sales@sensitron.com * SENSITRON SEMICONDUCTOR 1425, A S-G S-G Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. * * * * * * ! ! !!"#$* * % & '(&)*+,,---. & ./0*12&%# %3 & ./0*