KBPC1000S-G – KBPC1010S-G
10A IN-LINE BRIDGE RECTIFIER
Data sheet 1425, Rev. A
Features
Diffused Junction
Low Forward Voltage Drop
High Current Capability A
High Reliability
High Surge Current Capability
Ideal for Printed Circuit Boards
Designed for Saving Mounting Space
- ~ ~ +
Mechanical Data C
Case: Epoxy Case with Heat Sink Internally D
Mounted in the Bridge Encapsulation
Terminals: Plated Leads Solderable per E E
MIL-STD-202, Method 208
Polarity: As Marked on Body METAL HEATSINK
Weight: 30 grams (approx.) G B
Mounting Position: Any
Marking: Type Number
H
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise speci f i ed
Single Phase, half wave, 60Hz, resist i ve or inductive load.
For capacitive l oad, derate current by 20%.
Characteristic Symbol KBPC
1000S-G KBPC
1001S-G KBPC
1002S-G KBPC
1004S-G KBPC
1006S-G KBPC
1008S-G KBPC
1010S-G Unit
Peak Repeti tive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR 50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current @TA = 50°C IO 10 A
Non-Repetiti ve Peak Forward Surge Current
8.3m s Single half sine-wave superim posed on
rated load (JE DEC Method) IFSM 200 A
Forward Voltage (per element) @IF = 5.0A VFM 1.2 V
Peak Reverse Current @T
A = 25°C
At Rated DC Blocking Voltage @TA = 100°C IR 10
1.0 µA
mA
Rating for Fus i ng (t < 8.3m s) (Note 1) I2t 374 A2s
Typical Thermal Res i stance (Note 2) RθJC 2.0 K/W
RMS Isolation Voltage from Case to Lead VISO 2500 V
Operating and Storage Temperat ure Range Tj, TSTG -55 to +150 °C
Note: 1. Non-repetit i ve f or t > 1ms and < 8.3ms .
2. Thermal res i stance junct i on to case per element mounted on 8" x 8" x 25" thick AL plate.
SENSITRON
SEMICONDUCTOR
•!! !!"#$•
•%&'(&)*+,,---.&./0•12&%#%3&./0•
KBPC-S
Dim Min Max Min Max
A28.40 28.70 1.12 1.13
B10.97 11.23 0.432 0.442
C13.90 — 0.547 —
D19.10 — 0.752 —
E5.10 — 0.201 —
G1.20 Ø Typic al 0.047 ØTypical
H3.05 0.120 3.60 0.142
In mm In inch
!"$%&'223064
Green Products
Green Products in Compliance with the RoHS Directive
0.01
0.1
1.0
10
100
0 0.4 0.8 1.0 1.6 1.80.60.2 1.2 1.4
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics (per element)
F
T = 25°C
j
Pulse Width = 300µs
0
100
200
300
400
1 10 100
I , PEAK FWD. SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Max Non-Repetitive Surge Current
Single Half-Sine Wave
(JEDEC Method)
T = 150°C
j
10
100
1000
0.1 1.0 10 100
C , CAPACITANCE (pF)
j
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance (per element)
R
f=1Mhz
T = 25°C
j
0.01
0.1
1.0
10
100
4020 60 80 100 120 140
I , INSTANTANEOUS REVERSE CURRENT (µA)
R
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 5 Typical Reverse Characteristics (per element)
T = 125°C
j
T = 25°C
j
0
5
10
15
20
0 25 50 75 100 125 150
I , AVERAGE FORWARD CURRENT (A)
F
T,AMBIENT TEMPERATURE(°C)
Fig. 1 Forward. Current Derating Curve
A
Resistive or
Inductive load
Mounted on a
220x220x50mm
AL plate heatsink
• 221 West Industry Court ! Deer Par k, NY 11729-4681 ! ( 631) 586- 7600 FAX (631) 242-9798 •
• World Wide We b Sit e - ht tp://www.sensitron. com • E-Mail Address - sales@sensitr on.com •
S-GS-G
1425,A
Green Products
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to improve
product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest
version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
Green Products
SENSITRON
SEMICONDUCTOR
•!! !!"#$•
•%&'(&)*+,,---.&./0•12&%#%3&./0•
S-GS-G
1425,A
•
•
•
•
•
• 221 West Industry Court ! Deer Par k, NY 11729-4681 ! ( 631) 586- 7600 FAX (631) 242-9798 •
• World Wide We b Sit e - ht tp://www.sensitron. com • E-Mail Address - sales@sensitr on.com •
