REV. 6/3/05 STEWART + PATENTED Z|__IR | |. ___.615 [15.62] MAX. ~| 100 [2.54] (3) 050 [1.27] (7) 050 [1.27] 9.035 [0.89] +.003 [0.08] (8) [006 [0.15]| PIN # 128 [3.25] 725 [3.18] (2) .006 [0.15] 1+ .697 [15.93] MAX. |~ .650 [16.51 MAX. 441 * +o bh O-- AT ea P.C.B. RECOMMENDED HOLE LAYOUT SEEN FROM COMPONENT SIDE | ALL CENTERLINE DIMENSIONS ARE BASIC. L_] TT [3.18] +.010 [0.25] fL_ F 125 [3.18] DATE REV ECN APP'D. BY 6-8-12 B6 9501 SMN 8-15-12 CO 9566 TRM _ | k Al fr i 3 | l+ 450 [11.43] ~ NOTES: |. CONNECTOR MATERIALS: HOUSING: THERMOPLASTIC UL94 V0 CONTACTS: COPPER ALLOY CONTACT PLATING: SELECTIVE GOLD IN CONTACT AREA SEE CHART FOR PART NUMBER 2. FOR PRODUCT SPECIFICATIONS SEE PRO26-01. 3. DIMENSIONS AND TOLERANCES COMPLY WITH TIA-1096 STANDARD. 50 MICRO-INCHES [1.27um] SS-650810-A-NF-50 30 MICRO-INCHES [0.76um] SS650810-A-NF CONTACT PLATING IN MATING AREA PART NUMBER THIRD ANGLE PROJECTION 11118 Susquehanna Trail South Glen Rock, PA 17327-9199 (717) 235-7512 Fax: (717) 235-7954 @ = Bel Stewart Connector http: //www.stewartconnector.com DO NOT SCALE DRAWING DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE JACK, "NF NON-FLANGE * EIGHT CONTACT, TEN POSITION, VERTICAL MOUNT, UNSHIELDED DIMENSIONS: INCHES [METRIC] THIS DRAWING AND THE SUBVECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONSENT OF BEL STEWART CONNECTOR. THIS PRODUCT MAY BE PROTECTED BY ONE OR MORE OF THE FOLLOWING US PATENTS: 563966 5791942 6217391 6368159 6419526 6602097 687722 UNLESS OTHERWISE SPECIFIED TOLERANCES ARE +.005 [0.13] ANGLES ARE + 1 6964587 7048590 7086909 7568950 7686650 OTHER PATENTS MAY BE PENDING. SHEET NO. 1 OF 1 DRN BY: TRM |" 4-28-03 APPD BY: RCC |" 1-28-03 DWG NO. REV. CT650019 * CO 1 AutoCAD