1) Mounted on P.C. board with 25 mm2 copper pads at each terminal
Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lötpad) an jedem Anschluß
2) Tested with pulses – Gemessen mit Impulsen
3) The ZMD 1 is a diode operated in forward. Hence, the index of all parameters should be “F” instead of “Z”.
The cathode, indicated the yellow ring is to be connected to the negative pole.
Die ZMD 1 ist eine in Durchlaß betriebene Si-Diode. Daher ist bei allen Kenn- und Grenzwerten der Index
“F” anstatt “Z” zu setzten. Die durch den gelben Ring gekennzeichnete Kathode ist mit dem Minuspol zu verbinden.
196 28.02.2002
ZMD 1 … ZMD 100 (1 W)
Surface mount Silicon-Zener Diodes Flächendiffundierte Si-Zener-Dioden
(non-planar technology) für die Oberflächenmontage
Maximum power dissipation 1 W
Maximale Verlustleistung
Nominal Z-voltage – Nominale Z-Spannung 1…100 V
Plastic case MiniMELF SOD-80
Kunststoffgehäuse MiniMELF DO-213AA
Weight approx. – Gewicht ca. 0.04 g
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Dimensions / Maße in mm
Standard packaging taped and reeled see page 18
Standard Lieferform gegurtet auf Rolle siehe Seite 18
Marking: One blue ring denotes “cathode” and “Z-Diode family”
The type numbers are noted only on the lable on the reel
Kennzeichnung: Ein blauer Ring kennzeichnet “Kathode” und “Z-Dioden-Familie”
Die Typenbezeichnungen sind nur auf dem Rollenaufkleber vermerkt
Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard.
Other voltage tolerances and higher Zener voltages on request.
Die Toleranz der Zener-Spannung ist in der Standard-Ausführung gestuft nach der internationa-
len Reihe E 24 (~5%). Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage.
Maximum ratings and Characteristics Grenz- und Kennwerte
Power dissipation – Verlustleistung TA = 25/CP
tot 1 W 1)
Operating junction temperature – Sperrschichttemperatur Tj– 50...+175/C
Storage temperature – Lagerungstemperatur TS– 50...+175/C
Thermal resistance junction to ambient air RthA < 150 K/W 1)
Wärmewiderstand Sperrschicht – umgebende Luft
Thermal resistance junction to terminal RthT < 60 K/W
Wärmewiderstand Sperrschicht – Kontaktfläche
Zener voltages see table on next page – Zener-Spannungen siehe Tabelle auf der nächsten Seite