SF2002E * * * * * RF Filter for EGSM Low-loss Design No Matching Circuit Required 3.0 x 3.0 x 1.3 mm Package Complies with Directive 2002/95/EC (RoHS) 942.5 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Maximum Input Power Units +15 dBm -5 to +5 VDC Operating Temperature Range -30 to +85 C Storage Temperature Range in Tape and Reel -40 to +85 C 265 C DC Voltage on any Non-ground Terminal Maximum Soldering Profile, 5 Cycles/10 seconds Maximum SM3030-6 Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Nominal Operating Frequency fC 942.5 Passband Insertion Loss, 925 to 960 MHz IL 2.2 3.0 dB 0.8 1.5 dBP-P Amplitude Ripple, 925 to 960 MHz MHz Attenuation Referenced to 0 dB: DC to 905 MHz 17.0 20.5 dB 905 to 915 MHz 5.0 15.0 dB 980 to 1000 MHz 13.0 30.0 dB 1000 to 2000 MHz 20.0 23.0 VSWR, 925 to 960 MHz 2.2 dB 2.7 dB Source Impedance 1 50 Load Impedance 1 50 Case Style SM3030-6 3 x 3 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, D=day) 597 YYWWD Electrical Connections Connection 50 Terminals pin 2 pin 5 Input 2 Output 5 TOP VIEW Ground All others All Others SAW Filter 50 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. 5. 6. 7. 8. The design, manufacturing process, and specifications of this filter are subject to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. Page 1 of 5 SF2002E - 7/21/10 FREQUENCY CHRACTERISTICS: 1. wideband response: www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. Page 2 of 5 SF2002E - 7/21/10 S11 Return Loss & VSWR: S22 Return Loss & VSWR: www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. Page 3 of 5 SF2002E - 7/21/10 SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 Max 3.13 3.13 1.38 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Max 0.123 0.123 0.054 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 m Gold over 1.27 to 8.89 m Nickel Lid Plating 2.0 to 3.0 m Nickel Body Al2O3 Ceramic Pb Free TOP VIEW BOTTOM VIEW B 1 3 6 597 YWWS A 2 5 E 4 D www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. G C F H 6 1 5 2 4 3 I J Page 4 of 5 SF2002E - 7/21/10 Inches "B" REF. 100 REF. Tape and Reel Specifications "B" millimeters Quantity Per Reel 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION 2.0 4.0 A 1.5 1.75 0.3 3.35 B PIN #1 3.35 3.30 12.0 5.5 RO.3 (MAX.) B 8.0 A 1.6 1.4 R0.5 (TYP.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 5 of 5 SF2002E - 7/21/10