SN74AVC2T245 www.ti.com SCES692A - JUNE 2008 - REVISED MAY 2012 DUAL-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS Check for Samples: SN74AVC2T245 FEATURES 1 * * * * * * ESD Protection Exceeds JESD 22 - 5000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A) - 1500-V Charged-Device Model (C101) RSW PACKAGE (TOP VIEW) VCCA VCCB * Each Channel Has Independent Direction Control Control Inputs VIH/VIL Levels Are Referenced to VCCA Voltage Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.2-V to 3.6V Power-Supply Range I/Os Are 4.6-V Tolerant Ioff Supports Partial-Power-Down Mode Operation Typical Data Rates - 500 Mbps (1.8-V to 3.3-V Translation) - 320 Mbps (<1.8-V to 3.3-V Translation) - 320 Mbps (Translate to 2.5 V or 1.8 V) - 280 Mbps (Translate to 1.5 V) - 240 Mbps (Translate to 1.2 V) Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II 7 A1 A2 DIR1 6 8 5 9 4 10 3 1 B1 B2 GND 2 DIR2 OE * DESCRIPTION/ORDERING INFORMATION This dual-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes. ORDERING INFORMATION PACKAGE (1) TA -40C to 85C (1) (2) QFN - RSW (2) Tape and reel ORDERABLE PART NUMBER SN74AVC2T245RSWR TOP-SIDE MARKING TQ_ Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2008-2012, Texas Instruments Incorporated SN74AVC2T245 SCES692A - JUNE 2008 - REVISED MAY 2012 www.ti.com DESCRIPTION/ORDERING INFORMATION (CONTINUED) The SN74AVC2T245 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode . The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ. The SN74AVC2T245 is designed so that the control pins (DIR1, DIR2, and OE) are supplied by VCCA. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The VCC isolation feature ensures that if either VCC input is at GND, both ports are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE must be connected to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. FUNCTION TABLE (1) (EACH TRANSCEIVER) CONTROL INPUTS OE (1) OUTPUT CIRCUITS OPERATION DIR1 A PORT B PORT L L Enabled Hi-Z B data to A data L H Hi-Z Enabled A data to B data H X Hi-Z Hi-Z Isolation Input circuits of the data I/Os are always active. LOGIC DIAGRAM (POSITIVE LOGIC) DIR1 OE A1 B1 (1) 2 Shown for a single channel Submit Documentation Feedback Copyright (c) 2008-2012, Texas Instruments Incorporated Product Folder Link(s): SN74AVC2T245 SN74AVC2T245 www.ti.com SCES692A - JUNE 2008 - REVISED MAY 2012 TYPICAL APPLICATION 3.0 V 1.8 V 1 k VCCA VCCB OE Peripheral DIR1 Processor UART Tx A1 B1 Rx Rx A2 B2 Tx DIR2 SN1203086 GND Figure 1. Typical Application of the SN74AVC2T245 ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) MIN MAX -0.5 4.6 I/O ports (A port) -0.5 4.6 I/O ports (B port) -0.5 4.6 Control inputs -0.5 4.6 A port -0.5 4.6 B port -0.5 4.6 A port -0.5 VCCA + 0.5 B port -0.5 VCCB + 0.5 VCCA Supply voltage range VCCB VI Input voltage range (2) UNIT V V VO Voltage range applied to any output in the high-impedance or power-off state (2) VO Voltage range applied to any output in the high or low state (2) IIK Input clamp current VI < 0 -50 mA IOK Output clamp current VO < 0 -50 mA IO Continuous output current 50 mA 100 mA (3) Continuous current through VCCA, VCCB, or GND D package (4) Package thermal impedance 82 DGV package (4) PW package 120 (4) (1) (2) (3) (4) (5) Storage temperature range C/W 108 RGY package (5) Tstg V 73 DB package (4) JA V 39 -65 150 C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input voltage and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. The output positive-voltage rating may be exceeded up to 4.6 V maximum if the output current rating is observed. The package thermal impedance is calculated in accordance with JESD 51-7. The package thermal impedance is calculated in accordance with JESD 51-5. Submit Documentation Feedback Copyright (c) 2008-2012, Texas Instruments Incorporated Product Folder Link(s): SN74AVC2T245 3 SN74AVC2T245 SCES692A - JUNE 2008 - REVISED MAY 2012 www.ti.com RECOMMENDED OPERATING CONDITIONS (1) (2) (3) MIN MAX VCCA Supply voltage VCCI 1.2 3.6 V VCCB Supply voltage 1.2 3.6 V High-level input voltage VIH Low-level input voltage VIL High-level input voltage VIH VIL Low-level input voltage VI Input voltage Data inputs (4) Data inputs (4) DIR (referenced to VCCA) (5) DIR (referenced to VCCA) (5) VCCO 1.2 V to 1.95 V VCCI x 0.65 1.95 V to 2.7 V 1.6 2.7 V to 3.6 V 2 VCCI x 0.35 1.95 V to 2.7 V 0.7 2.7 V to 3.6 V 0.8 VCCA x 0.65 1.95 V to 2.7 V 1.6 2.7 V to 3.6 V 2 Output voltage IOH VCCA x 0.35 1.95 V to 2.7 V 0.7 IOL 3.6 Active state 0 VCCO 3-state 0 3.6 Low-level output current t/v Input transition rise or fall rate TA Operating free-air temperature (1) (2) (3) (4) (5) 4 V 0.8 0 High-level output current V V 1.2 V to 1.95 V 2.7 V to 3.6 V VO V 1.2 V to 1.95 V 1.2 V to 1.95 V UNIT 1.1 V to 1.2 V -3 1.4 V to 1.6 V -6 1.65 V to 1.95 V -8 2.3 V to 2.7 V -9 3 V to 3.6 V -12 1.1 V to 1.2 V 3 1.4 V to 1.6 V 6 1.65 V to 1.95 V 8 2.3 V to 2.7 V 9 3 V to 3.6 V 12 -40 V V mA mA 5 ns/V 85 C VCCI is the VCC associated with the input port. VCCO is the VCC associated with the output port. All unused data inputs of the device must be held at VCCI or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. For VCCI values not specified in the data sheet, VIH min = VCCI x 0.7 V, VIL max = VCCI x 0.3 V For VCCI values not specified in the data sheet, VIH min = VCCA x 0.7 V, VIL max = VCCA x 0.3 V Submit Documentation Feedback Copyright (c) 2008-2012, Texas Instruments Incorporated Product Folder Link(s): SN74AVC2T245 SN74AVC2T245 www.ti.com SCES692A - JUNE 2008 - REVISED MAY 2012 ELECTRICAL CHARACTERISTICS (1) (2) over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = -100 A VCCA MIN TYP MIN 1.4 V 1.05 1.65 V 1.65 V 1.2 IOH = -9 mA 2.3 V 2.3 V 1.75 IOH = -12 mA 3V 3V 2.3 V 0.2 1.2 V 1.2 V 1.4 V 1.4 V 0.35 1.65 V 1.65 V 0.45 IOL = 9 mA 2.3 V 2.3 V 0.55 IOL = 12 mA 3V 3V 0.7 IOL = 6 mA IOL = 8 mA VI = VIL II Control inputs Ioff A or B port VI or VO = 0 to 3.6 V IOZ A or B port VI = VCCA or GND 1.2 V to 3.6 V 1.2 V to 3.6 V VO = VCCO or GND, VI = VCCI or GND, OE = VIH 0.25 0.025 0.25 1 0V 0 V to 3.6 V 0.1 1 5 0 V to 3.6 V 0V 0.1 1 5 3.6 V 3.6 V 0.5 2.5 5 1.2 V to 3.6 V 1.2 V to 3.6 V VI = VCCI or GND, IO = 0 VI = VCCI or GND, IO = 0 ICCA + ICCB VI = VCCI or GND, IO = 0 Ci Control inputs 0 V to 3.6 V -2 0 V to 3.6 V 0V 8 Cio A or B port VO = 3.3 V or GND A A A A 8 0V 0 V to 3.6 V 8 0 V to 3.6 V 0V -2 1.2 V to 3.6 V 1.2 V to 3.6 V VI = 3.3 V or GND V 8 0V 1.2 V to 3.6 V 1.2 V to 3.6 V ICCB UNIT 0.95 1.2 V to 3.6 V 1.2 V to 3.6 V IOL = 3 mA MAX VCCO - 0.2 1.4 V VI = VIH IOL = 100 A (1) (2) MAX 1.2 V IOH = -8 mA ICCA -40C to 85C 1.2 V IOH = -6 mA VOL TA = 25C 1.2 V to 3.6 V 1.2 V to 3.6 V IOH = -3 mA VOH VCCB A 16 A 3.3 V 3.3 V 3.5 4.5 pF 3.3 V 3.3 V 6 7 pF VCCO is the VCC associated with the output port. VCCI is the VCC associated with the input port. Submit Documentation Feedback Copyright (c) 2008-2012, Texas Instruments Incorporated Product Folder Link(s): SN74AVC2T245 5 SN74AVC2T245 SCES692A - JUNE 2008 - REVISED MAY 2012 www.ti.com SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCCA = 1.2 V (unless otherwise noted) (see Figure 2) PARAMETER FROM (INPUT) TO (OUTPUT) A B B A OE A OE B OE A OE B tPLH tPHL tPLH tPHL tPZH tPZL tPZH tPZL tPHZ tPLZ tPHZ tPLZ VCCB = 1.2 V VCCB = 1.5 V 0.1 V VCCB = 1.8 V 0.15 V VCCB = 2.5 V 0.2 V VCCB = 3.3 V 0.3 V TYP TYP TYP TYP TYP 2.5 2.1 1.9 1.9 1.9 2.5 2.1 1.9 1.9 1.9 2.5 2.2 2 1.8 1.7 2.5 2.2 2 1.8 1.7 3.8 3.1 2.7 2.6 3 3.8 3.1 2.7 2.6 3 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 4.4 3.6 3.5 3.3 4.1 4.4 3.6 3.5 3.3 4.1 4.2 4.2 4.3 4.1 4.2 4.2 4.2 4.3 4.1 4.2 UNIT ns ns ns ns ns ns SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCCA = 1.5 V 0.1 V (see Figure 2) PARAMETER tPLH tPHL tPLH tPHL tPZH tPZL tPZH tPZL tPHZ tPLZ tPHZ tPLZ 6 FROM (INPUT) TO (OUTPUT) A B B A OE A OE B OE A OE B VCCB = 1.2 V VCCB = 1.5 V 0.1 V VCCB = 1.8 V 0.15 V VCCB = 2.5 V 0.2 V VCCB = 3.3 V 0.3 V TYP MIN MAX MIN MAX MIN MAX MIN MAX 2.2 0.3 4.4 0.2 3.9 0.1 3.6 0.1 3.9 2.2 0.3 4.4 0.2 3.9 0.1 3.6 0.1 3.9 2 0.6 5.1 0.4 4.9 0.2 4.6 0.1 4.5 2 0.6 5.1 0.4 4.9 0.2 4.6 0.1 4.5 3.4 1.1 7.1 0.9 6.2 0.7 5.5 0.1 6.4 3.4 1.1 7.1 0.9 6.2 0.7 5.5 0.1 6.4 2.5 1.1 8.2 1.1 8.2 1.1 8.2 1.1 8.2 2.5 1.1 8.2 1.1 8.2 1.1 8.2 1.1 8.2 4.1 1.2 7.1 0.8 6.7 0.4 5.6 1 74 4.1 1.2 7.1 0.8 6.7 0.4 5.6 1 7.4 3.3 0.3 7.4 0.2 5.7 0.3 5.6 0.3 5.6 3.3 0.3 7.4 0.2 5.7 0.3 5.6 0.3 5.6 Submit Documentation Feedback UNIT ns ns ns ns ns ns Copyright (c) 2008-2012, Texas Instruments Incorporated Product Folder Link(s): SN74AVC2T245 SN74AVC2T245 www.ti.com SCES692A - JUNE 2008 - REVISED MAY 2012 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCCA = 1.8 V 0.15 V (see Figure 2) PARAMETER tPLH tPHL tPLH tPHL tPZH tPZL tPZH tPZL tPHZ tPLZ tPHZ tPLZ FROM (INPUT) TO (OUTPUT) A B B A OE A OE B OE A OE B VCCB = 1.2 V VCCB = 1.5 V 0.1 V VCCB = 1.8 V 0.15 V VCCB = 2.5 V 0.2 V VCCB = 3.3 V 0.3 V UNIT TYP MIN MAX MIN MAX MIN MAX MIN MAX 2 0.1 4.1 0.1 3.6 0.1 3.1 0.1 3.3 2 0.1 4.1 0.1 3.6 0.1 3.1 0.1 3.3 1.9 0.4 4.3 0.1 4.1 0.1 3.8 0.1 3.7 1.9 0.4 4.3 0.1 4.1 0.1 3.8 0.1 3.7 3.2 0.8 6.7 0.4 5.8 0.4 4.8 0.3 4.6 3.2 0.8 6.7 0.4 5.8 0.4 4.8 0.3 4.6 1.9 0.2 6.7 0.2 6.6 0.2 6.7 0.2 6.7 1.9 0.2 6.7 0.2 6.6 0.2 6.7 0.2 6.7 3.8 0.7 6.2 0.3 6.5 0.1 5.2 0.8 6.5 3.8 0.7 6.2 0.3 6.5 0.1 5.2 0.8 6.5 3.4 0.1 6.8 0.1 6.8 0.1 6.7 0.1 6.7 3.4 0.1 6.8 0.1 6.8 0.1 6.7 0.1 6.7 ns ns ns ns ns ns SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCCA = 2.5 V 0.2 V (see Figure 2) PARAMETER tPLH tPHL tPLH tPHL tPZH tPZL tPZH tPZL tPHZ tPLZ tPHZ tPLZ FROM (INPUT) TO (OUTPUT) A B B A OE A OE B OE A OE B VCCB = 1.2 V VCCB = 1.5 V 0.1 V VCCB = 1.8 V 0.15 V VCCB = 2.5 V 0.2 V VCCB = 3.3 V 0.3 V TYP MIN MAX MIN MAX MIN MAX MIN MAX 1.9 0.1 3.8 0.1 3.2 0.1 2.7 0.1 2.6 1.9 0.1 3.8 0.1 3.2 0.1 2.7 0.1 2.6 1.8 0.5 3.4 0.2 3.1 0.1 2.8 0.1 2.6 1.8 0.5 3.4 0.2 3.1 0.1 2.8 0.1 2.6 3.1 0.7 6.2 0.5 5.2 0.3 4.1 0.3 3.6 3.1 0.7 6.2 0.5 5.2 0.3 4.1 0.3 3.6 1.4 0.4 4.5 0.4 4.5 0.4 4.5 0.4 4.5 1.4 0.4 4.5 0.4 4.5 0.4 4.5 0.4 4.5 3.6 0.2 5.2 0.1 5.4 0.1 4.5 0.7 6 3.6 0.2 5.2 0.1 5.4 0.1 4.5 0.7 6 2.1 0.1 4.7 0.1 4.6 0.1 4.7 0.1 4.7 2.1 0.1 4.7 0.1 4.6 0.1 4.7 0.1 4.7 Submit Documentation Feedback Copyright (c) 2008-2012, Texas Instruments Incorporated Product Folder Link(s): SN74AVC2T245 UNIT ns ns ns ns ns ns 7 SN74AVC2T245 SCES692A - JUNE 2008 - REVISED MAY 2012 www.ti.com SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCCA = 3.3 V 0.3 V (see Figure 2) PARAMETER FROM (INPUT) TO (OUTPUT) A B B A OE A OE B OE A OE B tPLH tPHL tPLH tPHL tPZH tPZL tPZH tPZL tPHZ tPLZ tPHZ tPLZ VCCB = 1.2 V VCCB = 1.5 V 0.1 V VCCB = 1.8 V 0.15 V VCCB = 2.5 V 0.2 V VCCB = 3.3 V 0.3 V TYP MIN MAX MIN MAX MIN MAX MIN MAX 1.8 0.1 3.6 0.1 3 0.1 2.6 0.1 2.4 1.8 0.1 3.6 0.1 3 0.1 2.6 0.1 2.4 1.9 0.5 3.4 0.2 2.9 0.1 2.5 0.1 2.3 1.9 0.5 3.4 0.2 2.9 0.1 2.5 0.1 2.3 3.1 0.9 5.9 0.5 5 0.3 3.8 0.3 3.3 3.1 0.9 5.9 0.5 5 0.3 3.8 0.3 3.3 1.2 0.4 3.6 0.4 3.6 0.4 3.6 0.4 3.6 1.2 0.4 3.6 0.4 3.6 0.4 3.6 0.4 3.6 3.4 0.1 4.6 0.1 4.7 0.3 4.8 0.7 4.5 3.4 0.1 4.6 0.1 4.7 0.3 4.8 0.7 4.5 2.9 0.1 5.4 0.1 5.3 0.1 5.3 0.1 5.3 2.9 0.1 5.4 0.1 5.3 0.1 5.3 0.1 5.3 UNIT ns ns ns ns ns ns OPERATING CHARACTERISTICS TA = 25C VCCA = VCCB = 1.2 V VCCA = VCCB = 1.5 V VCCA = VCCB = 1.8 V VCCA = VCCB = 2.5 V VCCA = VCCB = 3.3 V TYP TYP TYP TYP TYP 3 3 3 3 4 1 1 1 2 2 12 13 13 15 15 Outputs disabled 1 2 2 2 2 Outputs enabled 12 13 13 14 16 1 2 2 2 2 3 3 3 4 4 1 1 1 2 2 PARAMETER A to B CpdA (1) B to A A to B CpdB (1) B to A (1) 8 TEST CONDITIONS Outputs enabled Outputs disabled Outputs enabled Outputs disabled Outputs enabled CL = 0, f = 10 MHz, tr = tf = 1 ns UNIT pF CL = 0, f = 10 MHz, tr = tf = 1 ns pF Outputs disabled Power dissipation capacitance per transceiver Submit Documentation Feedback Copyright (c) 2008-2012, Texas Instruments Incorporated Product Folder Link(s): SN74AVC2T245 SN74AVC2T245 www.ti.com SCES692A - JUNE 2008 - REVISED MAY 2012 PARAMETER MEASUREMENT INFORMATION 2 x VCCO S1 RL From Output Under Test Open GND CL (see Note A) TEST S1 t pd t PLZ/t PZL t PHZ/t PZH Open 2 x VCCO GND RL tw LOAD CIRCUIT VCCI VCCI/2 Input CL RL VTP 15 pF 15 pF 2 k 2 k 0.15 V 0.3 V VCCO 1.8 V 0.15 V 3.0 V to 3.75 V VCCI/2 0V VOLTAGE WAVEFORMS PULSE DURATION VCCA Output Control (low-level enabling) VCCA /2 VCCA/2 0V t PLZ t PZL VCCI Input VCCI/2 VCCI/2 0V t PLH Output t PHL VOH VCCO/2 VOL VCCO/2 VCCO Output Waveform 1 S1 at 2 x VCCO (see Note B) VCCO/2 VOL + VTP VOL t PHZ t PZH Output Waveform 2 S1 at GND (see Note B) VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES VCCO/2 VOH - VTP VOH 0V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low , except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , dv/dt 1 V/ns. D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. VCCI is the VCC associated with the input port. I. VCCO is the VCC associated with the output port. Figure 2. Load and Circuit and Voltage Waveforms Submit Documentation Feedback Copyright (c) 2008-2012, Texas Instruments Incorporated Product Folder Link(s): SN74AVC2T245 9 SN74AVC2T245 SCES692A - JUNE 2008 - REVISED MAY 2012 www.ti.com REVISION HISTORY Changes from Original (June 2008) to Revision A * 10 Page Updated TOP-SIDE MARKING in the ORDERING INFORMATION table. .......................................................................... 1 Submit Documentation Feedback Copyright (c) 2008-2012, Texas Instruments Incorporated Product Folder Link(s): SN74AVC2T245 PACKAGE OPTION ADDENDUM www.ti.com 20-May-2013 PACKAGING INFORMATION Orderable Device Status (1) SN74AVC2T245RSWR ACTIVE Package Type Package Pins Package Drawing Qty UQFN RSW 10 3000 Eco Plan Lead/Ball Finish (2) Green (RoHS & no Sb/Br) MSL Peak Temp Op Temp (C) Device Marking (3) CU NIPDAU Level-1-260C-UNLIM (4/5) (TQ7 ~ TQO ~ TQR) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 Samples PACKAGE MATERIALS INFORMATION www.ti.com 6-Nov-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74AVC2T245RSWR UQFN RSW 10 3000 180.0 9.5 1.16 1.16 0.5 4.0 8.0 Q1 SN74AVC2T245RSWR UQFN RSW 10 3000 180.0 8.4 1.59 2.09 0.72 4.0 8.0 Q1 SN74AVC2T245RSWR UQFN RSW 10 3000 179.0 8.4 1.7 2.1 0.7 4.0 8.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 6-Nov-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AVC2T245RSWR UQFN RSW 10 3000 180.0 180.0 30.0 SN74AVC2T245RSWR UQFN RSW 10 3000 202.0 201.0 28.0 SN74AVC2T245RSWR UQFN RSW 10 3000 203.0 203.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2013, Texas Instruments Incorporated