& *R AE oH C- S C Q2 O 00 MP QU LI A L A NT IF IE D Features High saturation current Inductance range: 1.5 to 470 H Heating current up to 5.8 A Dimensions: 7.8 x 7 x 5 mm AEC-Q200 qualified RoHS compliant* and halogen free** SDE0805A Series - SMD Power Inductors SDE0805A-1R5M SDE0805A-2R5M SDE0805A-3R3M SDE0805A-4R7M SDE0805A-5R6M SDE0805A-6R8M SDE0805A-8R2M SDE0805A-100M SDE0805A-120M SDE0805A-150M SDE0805A-180M SDE0805A-220M SDE0805A-270M SDE0805A-330M SDE0805A-390M SDE0805A-470K SDE0805A-560K SDE0805A-680K SDE0805A-820K SDE0805A-101K SDE0805A-121K SDE0805A-151K SDE0805A-181K SDE0805A-221K SDE0805A-271K SDE0805A-331K SDE0805A-391K SDE0805A-471K L (H) Tol. (%) Test Freq./ Voltage SRF (MHz) Typ. 1.5 2.5 3.3 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 kHz / 1 V 1 kHz / 1 V 1 kHz / 1 V 1 kHz / 1 V 1 kHz / 1 V 1 kHz / 1 V 1 kHz / 1 V 1 kHz / 1 V 1 kHz / 1 V 115 71.2 53.3 44.2 34.9 32 28.5 27.5 25.8 22.5 17.6 16.5 14.3 13.2 12.6 12.1 11.5 10.5 9.4 8.8 7.7 7.2 6.2 6 5 4.9 4.4 3.6 DCR () Typ. DCR () Max. I rms (A) I sat (A) ***KFactor 0.015 0.02 0.024 0.028 0.032 0.036 0.039 0.05 0.056 0.06 0.074 0.082 0.094 0.117 0.137 0.165 0.2 0.23 0.3 0.32 0.36 0.515 0.576 0.75 0.87 1.02 1.29 1.47 0.02 0.027 0.032 0.038 0.043 0.048 0.052 0.07 0.08 0.09 0.1 0.11 0.12 0.13 0.16 0.18 0.24 0.28 0.37 0.43 0.47 0.64 0.71 0.96 1.11 1.2 1.5 1.7 5.8 5.0 4.6 4.3 4.0 3.8 3.6 3.2 3.0 2.5 2.45 2.35 2.2 2.0 1.9 1.7 1.6 1.45 1.2 1.1 1.0 0.9 0.85 0.8 0.7 0.65 0.6 0.55 6.5 5.0 4.5 4.0 3.7 3.2 3.0 2.6 2.4 2.2 2.0 1.8 1.7 1.6 1.5 1.4 1.2 1.1 1.0 0.9 0.8 0.72 0.65 0.6 0.55 0.5 0.45 0.4 218 166 149 135 123 105 98 86 81 73 66 58 53 46 44 39 36 33 30 28 25 23 21 19 17 15 14 13 I (peak-to-peak ripple current, A), determine core loss from Core Loss vs. Flux Density plot. Operating Temperature ................................-40 C to +125 C (Temperature rise included) Storage Temperature ................................-40 C to +125 C Resistance to Solder Heat ............................. +250 C for 10 sec. Temperature Rise .......................40 C typ. at rated Irms Inductance Drop ........... 10 % typ. at Isat Materials Core ..............................................Ferrite Wire ............................Enameled copper Terminal Finish ...................................Sn Packaging .................. 1000 pcs. per reel Product Dimensions 7.80 0.3 (.307 .012) 100 Inductance Bourns Part Number 7.00 0.3 (.276 .012) 5.00 0.5 (.197 .020) 2.10 REF. (.083) Core Loss vs. Flux Density 10000 1000 Core Loss (mW) Recommended Layout 100 7.50 (.295) 10 1 2.00 (.079) 8.00 (3156) 0.1 DIMENSIONS: 0.01 10 100 1 MHz 800 KHz 500 KHz 400 KHz 300 KHz 200 KHz 100 KHz Flux Density Bp-p (gauss) MM (INCHES) 1000 WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. ** Bourns considers a product to be "halogen free" if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SDE0805A Series - SMD Power Inductors Inductance vs. IDC Electrical Schematic SDE0805A-100M SDE0805A-3R3M L @ 25 C L @ 125 C 12.0 4.0 3.5 10.0 3.0 8.0 L (H) L (H) L @ 25 C 4.5 2.5 2.0 1.5 L @ 125 C How to Order 6.0 SDE0805A - 100M 4.0 Model 2.0 Value Code (see table) 1.0 0.5 0.0 0.0 1.0 2.0 3.0 4. 0 5.0 6.0 0.0 0.0 7.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 IDC (A) IDC (A) SDE0805A-101K SDE0805A-471K L @ 25 C L @ 125 C L @ 25 C L @ 125 C 120.0 500.0 450.0 100.0 400.0 350.0 300.0 250.0 200.0 150.0 100.0 50.0 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 L (H) L (H) 80.0 60.0 40.0 20.0 0.0 0.0 0.3 0.6 0.9 1.2 1.5 1.8 IDC (A) IDC (A) Temperature Rise vs. IDC SDE0805A-100M SDE0805A-3R3M T @ 25 C 70.0 70.0 60.0 60.0 50.0 50.0 T (C) T (C) T @ 25 C 40.0 30.0 40.0 30.0 20.0 20.0 10.0 10.0 0.0 0.0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 IDC (A) IDC (A) SDE0805A-101K SDE0805A-471K T @ 25 C 70.0 70.0 60.0 60.0 50.0 50.0 T (C) T (C) T @ 25 C 40.0 30.0 40.0 30.0 20.0 20.0 10.0 10.0 0.0 0.0 0.0 0.3 0.6 0.9 IDC (A) 1.2 1.5 1.8 Asia-Pacific: Tel: +886-2 2562-4117 Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 Fax: +1-951 781-5700 www.bourns.com 0.0 0.1 0.2 0.3 0.4 0.5 IDC (A) 0.6 0.7 0.8 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/ disclaimer.pdf. SDE0805A Series - SMD Power Inductors Temperature Rising Area Preheat Area Reflow Area Forced Cooling Area +4.0 C/Sec. Max. 150~200 C / 60~120 Sec. +3.0 C/Sec. Max. -(1.0~5.0) C/Sec. Max. Peak Temperature: 250 C Temperature (C) 250 217 C 60~150 Sec. 200 60 Sec. Max. 150 Max. Peak Temperature -5 C: 30 sec. max. Max. Time Above 217 C: 90-150 sec. max. 60~120 Sec. 100 Peak Temperature: 250 C max. 50 50 0 100 150 200 250 Time (Seconds) 2.0 0.5 (.079 .020) 330 (12.99) DIA. 22.4 (.882) THICKNESS 0.10 (.004) MAX. 13.0 0.5 (.512 .020) DIA. 21.0 0.8 (.827 .031) EMBOSSED CAVITY 50.0 -0 (1.969 - .000) 13.0 0.5 DIA. (.512 .020) EMBOSSED CARRIER 16.0 (.630) 18.0 +0 (.709 +.000) 12 (.472) END 4 (.157) 100 100 100 100 START 100 NO COMPONENT 350 (13.780) 100 NO COMPONENT 400 (15.748) COMPONENTS USER DIRECTION OF FEED QTY: 1,000 PCS. PER REEL DIMENSIONS: MM (INCHES) REV. 02/17 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and P[ZHSPH[LZJVSSLJ[P]LS)V\YUZ Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL<ZLYZZOV\SKJOLJRMVYHUKVI[HPU[OLSH[LZ[YLSL]HU[PUMVYTH[PVUHUK]LYPM[OH[Z\JOPUMVYTH[PVUPZJ\YYLU[ and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R)WYVK\J[PUH\ZLYHWWSPJH[PVUTH]HY MYVT[OLKH[HZOLL[JOHYHJ[LYPZ[PJZHUKWHYHTL[LYZK\L[VP[OLJVTIPUH[PVUVM[OL)V\YUZ(R) product with other components PU[OL\ZLYZHWWSPJH[PVUVYPP[OLLU]PYVUTLU[VM[OL\ZLYHWWSPJH[PVUP[ZLSM;OLJOHYHJ[LYPZ[PJZHUKWHYHTL[LYZVMH)V\YUZ(R) WYVK\J[HSZVJHUHUKKV]HYPUKPLYLU[HWWSPJH[PVUZHUKHJ[\HSWLYMVYTHUJLTH]HYV]LY[PTL<ZLYZZOV\SKHS^HZ]LYPM the actual performance of the Bourns(R)WYVK\J[PU[OLPYZWLJPAJKL]PJLZHUKHWWSPJH[PVUZHUKTHRL[OLPYV^UPUKLWLUKLU[ Q\KNTLU[ZYLNHYKPUN[OLHTV\U[VMHKKP[PVUHS[LZ[THYNPU[VKLZPNUPU[V[OLPYKL]PJLVYHWWSPJH[PVU[VJVTWLUZH[LMVY KPLYLUJLZIL[^LLUSHIVYH[VYHUKYLHS^VYSKJVUKP[PVUZ <USLZZ)V\YUZOHZL_WSPJP[SKLZPNUH[LKHUPUKP]PK\HS)V\YUZ(R) product as meeting the requirements of a particular industry Z[HUKHYKLN0:6;: VYHWHY[PJ\SHYX\HSPAJH[PVULN<3SPZ[LKVYYLJVNUPaLK)V\YUZPZUV[YLZWVUZPISLMVYHU MHPS\YLVMHUPUKP]PK\HS)V\YUZ(R)WYVK\J[[VTLL[[OLYLX\PYLTLU[ZVMZ\JOPUK\Z[YZ[HUKHYKVYWHY[PJ\SHYX\HSPAJH[PVU<ZLYZ of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to [OLPYKL]PJLZVYHWWSPJH[PVUZ Bourns(R)WYVK\J[ZHYLUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKMVY\ZLPUU\JSLHYSPMLZH]PUNSPMLJYP[PJHSVYSPMLZ\Z[HPUPUN HWWSPJH[PVUZUVYPUHUV[OLYHWWSPJH[PVUZ^OLYLMHPS\YLVYTHSM\UJ[PVUTHYLZ\S[PUWLYZVUHSPUQ\YKLH[OVYZL]LYLWYVWLY[ VYLU]PYVUTLU[HSKHTHNL<USLZZL_WYLZZSHUKZWLJPAJHSSHWWYV]LKPU^YP[PUNI[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZ on a case-by-case basis, use of any Bourns(R)WYVK\J[ZPUZ\JO\UH\[OVYPaLKHWWSPJH[PVUZTPNO[UV[ILZHMLHUK[O\ZPZH[ [OL\ZLYZZVSLYPZR3PMLJYP[PJHSHWWSPJH[PVUZPUJS\KLKL]PJLZPKLU[PALKI[OL<:-VVKHUK+Y\N(KTPUPZ[YH[PVUHZ*SHZZ000 KL]PJLZHUKNLULYHSSLX\P]HSLU[JSHZZPAJH[PVUZV\[ZPKLVM[OL<UP[LK:[H[LZ )V\YUZL_WYLZZSPKLU[PALZ[OVZL)V\YUZ(R)Z[HUKHYKWYVK\J[Z[OH[HYLZ\P[HISLMVY\ZLPUH\[VTV[P]LHWWSPJH[PVUZVUZ\JO WYVK\J[ZKH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK(WWSPJH[PVUZ<USLZZL_WYLZZSHUKZWLJPAJHSSHWWYV]LKPU^YP[PUNI[^V H\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLIJHZLIHZPZ\ZLVMHUV[OLY)V\YUZ(R)Z[HUKHYKWYVK\J[ZPUHUH\[VTV[P]L HWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKHUKPZH[[OL\ZLYZZVSLYPZR0M)V\YUZ L_WYLZZSPKLU[PALZHZ\IJH[LNVYVMH\[VTV[P]LHWWSPJH[PVUPU[OLKH[HZOLL[MVYP[ZZ[HUKHYKWYVK\J[ZZ\JOHZPUMV[HPUTLU[ VYSPNO[PUNZ\JOPKLU[PAJH[PVUTLHUZ[OH[)V\YUZOHZYL]PL^LKP[ZZ[HUKHYKWYVK\J[HUKOHZKL[LYTPULK[OH[PMZ\JO)V\YUZ(R) Z[HUKHYKWYVK\J[PZJVUZPKLYLKMVYWV[LU[PHS\ZLPUH\[VTV[P]LHWWSPJH[PVUZP[ZOV\SKVUSIL\ZLKPUZ\JOZ\IJH[LNVYVM H\[VTV[P]LHWWSPJH[PVUZ(UYLMLYLUJL[V)V\YUZ(R)Z[HUKHYKWYVK\J[PU[OLKH[HZOLL[HZJVTWSPHU[^P[O[OL(,*8Z[HUKHYK VYH\[VTV[P]LNYHKLKVLZUV[IP[ZLSMTLHU[OH[)V\YUZOHZHWWYV]LKZ\JOWYVK\J[MVY\ZLPUHUH\[VTV[P]LHWWSPJH[PVU Bourns(R)Z[HUKHYKWYVK\J[ZHYLUV[[LZ[LK[VJVTWS^P[O<UP[LK:[H[LZ-LKLYHS(]PH[PVU(KTPUPZ[YH[PVUZ[HUKHYKZNLULYHSS VYHUV[OLYNLULYHSSLX\P]HSLU[NV]LYUTLU[HSVYNHUPaH[PVUZ[HUKHYKHWWSPJHISL[VWYVK\J[ZKLZPNULKVYTHU\MHJ[\YLKMVY \ZLPUHPYJYHM[VYZWHJLHWWSPJH[PVUZ)V\YUZL_WYLZZSPKLU[PALZ)V\YUZ(R) standard products that are suitable for use in aircraft VYZWHJLHWWSPJH[PVUZVUZ\JOWYVK\J[ZKH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK(WWSPJH[PVUZ<USLZZL_WYLZZSHUKZWLJPAJHSS HWWYV]LKPU^YP[PUNI[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLIJHZLIHZPZ\ZLVMHUV[OLY)V\YUZ(R) standard WYVK\J[PUHUHPYJYHM[VYZWHJLHWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKHUKPZH[ the user's sole risk. ;OL\ZLHUKSL]LSVM[LZ[PUNHWWSPJHISL[V)V\YUZ(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R)J\Z[VTWYVK\J[ZHYLZWLJPHSSKLZPNULK(IZLU[H^YP[[LUHNYLLTLU[IL[^LLU)V\YUZ HUK[OL\ZLYYLNHYKPUN[OL\ZLHUKSL]LSVMZ\JO[LZ[PUN[OLHIV]LWYV]PZPVUZHWWSPJHISL[V)V\YUZ(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R)WYVK\J[ZVY[LJOUVSVNMVY\ZLPUHJ[P]P[PLZ^OPJOPU]VS]L[OL KLZPNUKL]LSVWTLU[WYVK\J[PVU\ZLVYZ[VJRWPSPUNVMU\JSLHYJOLTPJHSVYIPVSVNPJHS^LHWVUZVYTPZZPSLZUVYZOHSS[OL\ZL Bourns(R)WYVK\J[ZVY[LJOUVSVNPUHUMHJPSP[^OPJOLUNHNLZPUHJ[P]P[PLZYLSH[PUN[VZ\JOKL]PJLZ;OLMVYLNVPUNYLZ[YPJ[PVUZ HWWS[VHSS\ZLZHUKHWWSPJH[PVUZ[OH[]PVSH[LUH[PVUHSVYPU[LYUH[PVUHSWYVOPIP[PVUZPUJS\KPUNLTIHYNVZVYPU[LYUH[PVUHS YLN\SH[PVUZ-\Y[OLY)V\YUZ(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without WYPVYH\[OVYPa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bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf *9