MBR40250, MBR40250T, MBRF40250T, MBRB40250T 250 V, 40 A SWITCHMODE] Schottky Power Rectifier Features * * * * * http://onsemi.com 250 V Blocking Voltage Low Forward Voltage Drop, VF = 0.86 V Soft Recovery Characteristic, TRR < 35 ns Stable Switching Performance Over Temperature These are Pb-Free Devices* MARKING DIAGRAMS 4 TO-220AC CASE 221B Benefits * * * * Reduces or Eliminates Reverse Recovery Oscillations Minimizes Need for EMI Filtering Reduces Switching Losses Improved Efficiency 3 1, 4 1 3 4 TO-220AB CASE 221A T SUFFIX Applications * * * * Power Supply Power Management Automotive Instrumentation AYWW B40250TG AKA 1 2, 4 3 1 Mechanical Characteristics 2 3 * Case: Epoxy, Molded * Weight: 1.9 grams (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal TO-220 FULLPACK CASE 221D T SUFFIX Leads are Readily Solderable * Lead Temperature for Soldering Purposes: * AYWW B40250G KA AYWW B40250TG AKA 1 260C Max. for 10 Seconds Epoxy Meets UL 94 V-0 at 0.125 in 2 3 1 2 3 4 AY WW D2PAK CASE 418AJ B40250TG AKA 1 1 3 4 3 B40250 = Device Code T = 3 pins A = Assembly Location Y = Year WW = Work Week G = Pb-Free Package KA, AKA = Polarity Designator *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2011 October, 2011 - Rev. 11 1 ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. Publication Order Number: MBR40250/D MBR40250, MBR40250T, MBRF40250T, MBRB40250T MAXIMUM RATINGS Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 250 V Average Rectified Forward Current (Rated VR) TC = 82C MBR40250, MBR40250T, MBRB40250T (Rated VR) TC = 46C MBRF40250T IF(AV) 40 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz) TC = 82C MBR40250, MBR40250T, MBRB40250T (Rated VR, Square Wave, 20 kHz) TC = 46C MBRF40250T IFRM 80 A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 150 A Storage Temperature Tstg *65 to +175 C TJ *65 to +150 C dv/dt 10,000 V/ms Operating Junction Temperature Voltage Rate of Change (Rated VR) Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS Rating Symbol Maximum Thermal Resistance Junction-to-Case MBR40250(T) and MBRB40250T MBRF40250 Junction-to-Ambient MBR40250(T) MBRF40250 MBRB40250T RqJC RqJA Value 2.0 3.0 Unit C/W 60 50 50 ELECTRICAL CHARACTERISTICS Rating Symbol Maximum Instantaneous Forward Voltage (Note 1) Maximum Instantaneous Reverse Current (Note 1) Maximum Reverse Recovery Time IF = 20 A, TC = 25C IF = 20 A, TC = 125C IF = 40 A, TC = 25C IF = 40 A, TC = 125C Rated DC Voltage, TC = 25C Rated DC Voltage, TC = 125C IF = 1.0 A, di/dt = 50 A/ms, TC = 25C VF IR trr Value 0.86 0.71 0.97 0.86 0.25 30 35 Unit V mA ns DYNAMIC CHARACTERISTICS Capacitance VR = -5.0 V, TC = 25C, Frequency = 1.0 MHz 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%. http://onsemi.com 2 CT 500 pF MBR40250, MBR40250T, MBRF40250T, MBRB40250T 100 100 IF, MAXIMUM FORWARD CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) TYPICAL CHARACTERISTICS TJ = 150C TJ = 125C 10 TJ = 100C TJ = 25C 1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 TJ = 150C 10 TJ = 100C TJ = 125C TJ = 25C 1 0.3 0.4 0.7 0.8 0.9 1.0 VF, MAXIMUM FORWARD VOLTAGE (V) Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage 700 1.0E-02 600 C, CAPACITANCE (pF) IR, REVERSE CURRENT (A) TJ = 150C TJ = 125C 1.0E-03 TJ = 100C 1.0E-04 1.0E-05 1.0E-06 1.1 TJ = 25C 500 400 300 200 100 TJ = 25C 1.0E-07 25 50 100 75 125 150 175 200 225 0 250 1 10 VR, REVERSE VOLTAGE (V) Figure 4. Typical Capacitance PF(AV), AVERAGE POWER DISSIPATION (W) DC 100 VR, REVERSE VOLTAGE (V) Figure 3. Typical Reverse Current IF(AV), AVERAGE FORWARD CURRENT (A) 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) 1.0E-01 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0 0.5 RATED VOLTAGE RqJC = 2C/W SQUARE WAVE MBR40250 MBR40250T MBRB40250T 0 10 20 30 40 50 60 70 80 90 100110 120 130 140150 50 MBR40250 MBR40250T MBRB40250T 40 30 SQUARE WAVE 20 DC 10 0 0 TC, CASE TEMPERATURE (C) 5 10 15 20 25 30 35 IO, AVERAGE FORWARD CURRENT (A) Figure 5. Current Derating (Case) for MBR40250, MBR40250T and MBRB40250T Figure 6. Forward Power Dissipation for MBR40250, MBR40250T and MBRB40250T http://onsemi.com 3 40 MBR40250, MBR40250T, MBRF40250T, MBRB40250T 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0 PF(AV), AVERAGE POWER DISSIPATION (W) IF(AV), AVERAGE FORWARD CURRENT (A) TYPICAL CHARACTERISTICS RATED VOLTAGE RqJC = 3C/W DC SQUARE WAVE MBRF40250T 0 10 20 30 40 50 60 70 80 90 100110 120 130 140150 50 MBRF40250T 40 30 SQUARE WAVE 20 DC 10 0 0 TC, CASE TEMPERATURE (C) 5 10 15 20 25 30 IO, AVERAGE FORWARD CURRENT (A) Figure 7. Current Derating (Case) for MBRF40250T Figure 8. Forward Power Dissipation for MBRF40250T ORDERING INFORMATION Package Shipping MBR40250G TO-220AC (Pb-Free) 50 Units / Rail MBR40250TG TO-220AB (Pb-Free) 50 Units / Rail MBRF40250TG TO-220 FULLPACK (Pb-Free) 50 Units / Rail MBRB40250TG D2PAK (Pb-Free) 50 Units / Rail MBRB40250TT4G D2PAK (Pb-Free) 800 Units / Tape & Reel Device 35 http://onsemi.com 4 40 MBR40250, MBR40250T, MBRF40250T, MBRB40250T PACKAGE DIMENSIONS TO-220 CASE 221A-09 ISSUE AF -T- B F NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. SEATING PLANE C T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q U 1 2 3 H K Z L R V J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.161 0.095 0.105 0.110 0.155 0.014 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 STYLE 6: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 4.09 2.42 2.66 2.80 3.93 0.36 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 ANODE CATHODE ANODE CATHODE TO-220AC CASE 221B-04 ISSUE E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C B Q F T S DIM A B C D F G H J K L Q R S T U 4 A 1 3 U H K L R D G J http://onsemi.com 5 INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.161 0.190 0.210 0.110 0.130 0.014 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 4.09 4.83 5.33 2.79 3.30 0.36 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 MBR40250, MBR40250T, MBRF40250T, MBRB40250T PACKAGE DIMENSIONS TO-220 FULLPAK CASE 221D-03 ISSUE J -T- -B- F SEATING PLANE C S Q U A 1 2 3 H -Y- K G N L D J R 3 PL 0.25 (0.010) M B M Y http://onsemi.com 6 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH 3. 221D-01 THRU 221D-02 OBSOLETE, NEW STANDARD 221D-03. DIM A B C D F G H J K L N Q R S U INCHES MIN MAX 0.617 0.635 0.392 0.419 0.177 0.193 0.024 0.039 0.116 0.129 0.100 BSC 0.118 0.135 0.018 0.025 0.503 0.541 0.048 0.058 0.200 BSC 0.122 0.138 0.099 0.117 0.092 0.113 0.239 0.271 MILLIMETERS MIN MAX 15.67 16.12 9.96 10.63 4.50 4.90 0.60 1.00 2.95 3.28 2.54 BSC 3.00 3.43 0.45 0.63 12.78 13.73 1.23 1.47 5.08 BSC 3.10 3.50 2.51 2.96 2.34 2.87 6.06 6.88 MBR40250, MBR40250T, MBRF40250T, MBRB40250T PACKAGE DIMENSIONS D2PAK 3 (TO-263, 3-LEAD) CASE 418AJ ISSUE A B E2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. CHAMFER OPTIONAL 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH. MOLD FLASH SHALL NOT EXCEED 0.005 PER SIDE. THESE DIMENSIONS ARE MEASURED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY AT DATUM H. 5. THERMAL PAD CONTOUR IS OPTIONAL WITHIN DIMENSIONS E, L1, D1 AND E1. 6. OPTIONAL MOLD FEATURE A A E SEATING PLANE L1 c2 NOTE 3 A D1 L1 D H DETAIL C E1 0.10 L2 e 2X TOP VIEW b 0.10 B A B SEATING PLANE M DIM A A1 b c c2 D D1 E E1 e H L L1 L2 L3 M A c NOTE 6 M VIEW A-A SIDE VIEW M B A M H GAUGE PLANE L3 A1 L M DETAIL C INCHES MIN MAX 0.160 0.190 0.000 0.010 0.020 0.039 0.012 0.029 0.045 0.065 0.330 0.380 0.260 ---- 0.380 0.420 0.245 ---- 0.100 BSC 0.575 0.625 0.070 0.110 ---- 0.066 ---- 0.070 0.010 BSC 0 8 MILLIMETERS MIN MAX 4.06 4.83 0.00 0.25 0.51 0.99 0.30 0.74 1.14 1.65 8.38 9.65 6.60 ---- 9.65 10.67 6.22 ---- 2.54 BSC 14.60 15.88 1.78 2.79 ---- 1.68 ---- 1.78 0.25 BSC 0 8 RECOMMENDED SOLDERING FOOTPRINT 0.436 VIEW A-A OPTIONAL CONSTRUCTIONS 0.366 0.653 2X 0.169 2X 0.063 0.100 PITCH DIMENSIONS: INCHES SWITCHMODE is a trademark of Semiconductor Components Industries, LLC (SCILLC). ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MBR40250/D