5
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EMI Suppression Filters (EMIFILr) for AC Power Lines
Common Mode Choke Coil
The PLA10 series is a compact size AC common mode
choke coil. It can obtain a high inductance value in
spite of its compact size.
■ Features
1. Compact and light weight
2. Low profile in vertical core layout
3. Both a standard winding type and a sectional
winding type for higher frequency noise are
available. (in mm)
17.5 max.
18 max.
13±0.5 10±0.5
16 max.
ø0.9 max.
3.5±1
(1)
[(2)]
(4)
[(3)]
(4)
[(1)]
(3)
[(2)]
Standard Winding Type
(in mm)
17.5 max.
16 max.18 max.
13±0.5 10±0.5
ø0.9 max.
3.5±1
(1) (4)
[(2)]
(4)
[(1)]
(3)
[(2)][(3)]
Sectional Winding Type
PLA10 Series Standard Winding Type
Part Number Common Mode Inductance
(min.)
(mH)
Rated Current
(A) Rated Voltage
(V)
Insulation Resistance
(min.)
(M ohm)
PLA10AN1522R0R2 1.5 2.0 300 100
PLA10AN1821R7R2 1.8 1.7 300 100
PLA10AN2221R5R2 2.2 1.5 300 100
PLA10AN3021R3R2 3.0 1.3 300 100
PLA10AN3521R2R2 3.5 1.2 300 100
PLA10AN5521R0R2 5.5 1.0 300 100
PLA10AN7420R8R2 7.4 0.8 300 100
PLA10AN1030R7R2 10.0 0.7 300 100
PLA10AN1230R6R2 12.0 0.6 300 100
PLA10AN2030R5R2 20.0 0.5 300 100
PLA10AN3030R4R2 30.0 0.4 300 100
PLA10AN4330R3R2 43.0 0.3 300 100
Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise) : -25°C to 120°C Winding Temperature Rise (at Rated Current) (max.) : 60K
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note C09E7.pdf 04.1.14
