INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: * The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications * The IC06 74HC/HCT/HCU/HCMOS Logic Package Information * The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines 74HC/HCT373 Octal D-type transparent latch; 3-state Product specification File under Integrated Circuits, IC06 September 1993 Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74HC/HCT373 input and an output enable (OE) input are common to all latches. FEATURES * 3-state non-inverting outputs for bus oriented applications The "373" consists of eight D-type transparent latches with 3-state true outputs. When LE is HIGH, data at the Dn inputs enters the latches. In this condition the latches are transparent, i.e. a latch output will change state each time its corresponding D-input changes. * Common 3-state output enable input * Functionally identical to the "563", "573" and "533" * Output capability: bus driver * ICC category: MSI When LE is LOW the latches store the information that was present at the D-inputs a set-up time preceding the HIGH-to-LOW transition of LE. When OE is LOW, the contents of the 8 latches are available at the outputs. When OE is HIGH, the outputs go to the high impedance OFF-state. Operation of the OE input does not affect the state of the latches. GENERAL DESCRIPTION The 74HC/HCT373 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The "373" is functionally identical to the "533", "563" and "573", but the "563" and "533" have inverted outputs and the "563" and "573" have a different pin arrangement. The 74HC/HCT373 are octal D-type transparent latches featuring separate D-type inputs for each latch and 3-state outputs for bus oriented applications. A latch enable (LE) QUICK REFERENCE DATA GND = 0 V; Tamb = 25 C; tr = tf = 6 ns TYPICAL SYMBOL PARAMETER CONDITIONS UNIT HC tPHL/ tPLH propagation delay CL = 15 pF; VCC = 5 V Dn to Qn 12 14 ns LE to Qn 15 13 ns 3.5 3.5 pF 45 41 pF CI input capacitance CPD power dissipation capacitance per latch notes 1 and 2 Notes 1. CPD is used to determine the dynamic power dissipation (PD in W): PD = CPD x VCC2 x fi + (CL x VCC2 x fo) where: fi = input frequency in MHz fo = output frequency in MHz (CL x VCC2 x fo) = sum of outputs CL = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI = GND to VCC. For HCT the condition is VI = GND to VCC - 1.5 V ORDERING INFORMATION See "74HC/HCT/HCU/HCMOS Logic Package Information". September 1993 HCT 2 Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74HC/HCT373 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 1 OE 3-state output enable input (active LOW) 2, 5, 6, 9, 12, 15, 16, 19 Q0 to Q7 3-state latch outputs 3, 4, 7, 8, 13, 14, 17, 18 D0 to D7 data inputs 10 GND ground (0 V) 11 LE latch enable input (active HIGH) 20 VCC positive supply voltage Fig.1 Pin configuration. September 1993 Fig.2 Logic symbol. 3 Fig.3 IEC logic symbol. Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74HC/HCT373 FUNCTION TABLE INPUTS OPERATING MODES OE LE Dn INTERNAL LATCHES OUTPUTS Q0 to Q7 enable and read register (transparent mode) L H L L L L H H H H latch and read register L L L L l h L H L H latch register and disable outputs H H X X X X X X Z Z Notes Fig.4 Functional diagram. 1. H = HIGH voltage level h = HIGH voltage level one set-up time prior to the HIGH-to-LOW LE transition L = LOW voltage level I = LOW voltage level one set-up time prior to the HIGH-to-LOW LE transition X = don't care Z = high impedance OFF-state Fig.5 Logic diagram (one latch). Fig.6 Logic diagram. September 1993 4 Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74HC/HCT373 DC CHARACTERISTICS FOR 74HC For the DC characteristics see "74HC/HCT/HCU/HCMOS Logic Family Specifications". Output capability: bus driver ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (C) TEST CONDITIONS 74HC SYMBOL PARAMETER +25 -40 to +85 -40 to +125 min. typ. max. min. max. min. UNIT V WAVEFORMS CC (V) max. tPHL/ tPLH propagation delay Dn to Qn 41 15 12 150 30 26 190 38 33 225 45 38 ns 2.0 4.5 6.0 Fig.7 tPHL/ tPLH propagation delay LE to Qn 50 18 14 175 35 30 220 44 37 265 53 45 ns 2.0 4.5 6.0 Fig.8 tPZH/ tPZL 3-state output enable time OE to Qn 44 16 13 150 30 26 190 38 33 225 45 38 ns 2.0 4.5 6.0 Fig.9 tPHZ/ tPLZ 3-state output disable time OE to Qn 47 17 14 150 30 26 190 38 33 225 45 38 ns 2.0 4.5 6.0 Fig.9 tTHL/ tTLH output transition time 14 5 4 60 12 10 75 15 13 90 18 15 ns 2.0 4.5 6.0 Fig.7 tW LE pulse width HIGH 80 16 14 17 6 5 100 20 17 120 24 20 ns 2.0 4.5 6.0 Fig.8 tsu set-up time Dn to LE 50 10 9 14 5 4 65 13 11 75 15 13 ns 2.0 4.5 6.0 Fig.10 th hold time Dn to LE 5 5 5 -8 -3 -2 5 5 5 5 5 5 ns 2.0 4.5 6.0 Fig.10 September 1993 5 Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74HC/HCT373 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see "74HC/HCT/HCU/HCMOS Logic Family Specifications". Output capability: bus driver ICC category: MSI Note to HCT types The value of additional quiescent supply current (ICC) for a unit load of 1 is given in the family specifications. To determine ICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT Dn LE OE 0.30 1.50 1.00 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (C) TEST CONDITIONS 74HCT SYMBOL PARAMETER +25 -40 to +85 -40 to +125 min. typ. max. min. max. min. UNIT V WAVEFORMS CC (V) max. tPHL/ tPLH propagation delay Dn to Qn 17 30 38 45 ns 4.5 Fig.7 tPHL/ tPLH propagation delay LE to Qn 16 32 40 48 ns 4.5 Fig.8 tPZH/ tPZL 3-state output enable time OE to Qn 19 32 40 48 ns 4.5 Fig.9 tPHZ/ tPLZ 3-state output disable time OE to Qn 18 30 38 45 ns 4.5 Fig.9 tTHL/ tTLH output transition time 5 12 15 18 ns 4.5 Fig.7 tW LE pulse width HIGH 16 4 20 24 ns 4.5 Fig.8 tsu set-up time Dn to LE 12 6 15 18 ns 4.5 Fig.10 th hold time Dn to LE 4 -1 4 4 ns 4.5 Fig.10 September 1993 6 Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74HC/HCT373 AC WAVEFORMS (1) HC : VM = 50%; VI = GND to VCC. HCT : VM = 1.3 V; VI = GND to 3 V. (1) HC : VM = 50%; VI = GND to VCC. HCT : VM = 1.3 V; VI = GND to 3 V. Fig.7 Fig.8 Waveforms showing the input (Dn) to output (Qn) propagation delays and the output transition times. Waveforms showing the latch enable input (LE) pulse width, the latch enable input to output (Qn) propagation delays and the output transition times. (1) HC : VM = 50%; VI = GND to VCC. HCT : VM = 1.3 V; VI = GND to 3 V. Fig.9 Waveforms showing the 3-state enable and disable times. The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : VM = 50%; VI = GND to VCC. HCT : VM = 1.3 V; VI = GND to 3 V. Fig.10 Waveforms showing the data set-up and hold times for Dn input to LE input. September 1993 7 Philips Semiconductors Product specification Octal D-type transparent latch; 3-state PACKAGE OUTLINES See "74HC/HCT/HCU/HCMOS Logic Package Outlines". September 1993 8 74HC/HCT373