3 Stacking mm 1.00 1.50 1.50 3.00 3.90 4.00 4.00 4.00 4.20 4.50 4.50 4.70 5.00 5.00 5.00 5.00 5.50 5.90 6.00 6.00 6.00 6.00 6.35 6.60 7.00 7.00 7.00 7.00 8.00 8.00 8.00 8.00 8.13 9.00 9.00 9.00 9.00 9.00 9.91 10.00 10.00 10.00 10.92 11.00 11.00 11.00 11.00 12.00 12.00 12.00 12.00 12.57 13.00 13.00 13.00 13.08 14.00 14.00 14.00 15.00 15.00 15.00 15.00 15.61 16.00 16.00 16.00 17.96 18.00 18.00 18.75 20.00 20.00 21.60 22.86 27.00 27.80 29.00 31.90 Height inch 0.039 0.059 0.059 0.118 0.154 0.157 0.157 0.157 0.165 0.177 0.177 0.185 0.197 0.197 0.197 0.197 0.217 0.232 0.236 0.236 0.236 0.236 0.250 0.260 0.276 0.276 0.276 0.276 0.315 0.315 0.315 0.315 0.320 0.354 0.354 0.354 0.354 0.354 0.390 0.394 0.394 0.394 0.430 0.433 0.433 0.433 0.433 0.472 0.472 0.472 0.472 0.495 0.512 0.512 0.512 0.515 0.551 0.551 0.551 0.591 0.591 0.591 0.591 0.615 0.630 0.630 0.630 0.707 0.709 0.709 0.738 0.787 0.787 0.850 0.900 1.063 1.094 1.142 1.255 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height Guide for Parallel Board-to-Board Applications Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Connector Description Pitch .4mm Fine Stack .4mm Fine Stack .5mm Fine Stack .8mm Fine Stack .8mm Fine Stack .5mm Fine Mate .6mm Free Height .8mm Fine Mate .8mm Fine Stack .5mm Fine Mate .8mm Fine Mate .8mm Fine Stack .5mm Free Height .6mm Free Height .8mm Fine Stack .8mm Free Height .5mm Fine Mate .8mm Fine Stack .5mm Fine Mate .5mm Free Height .6mm Free Height .8mm Free Height AMPMODU 50/50 MICTOR .5mm Free Height .6mm Free Height .8mm Fine Stack .8mm Free Height .5mm Free Height .6mm Free Height .8mm Free Height 1mm Free Height AMPMODU 50/50 .5mm Free Height .8mm Fine Stack .8mm Free Height 1mm Free Height MICTOR AMPMODU 50/50 .6mm Free Height .8mm Free Height 1mm Free Height MICTOR .5mm Free Height .6mm Free Height .8mm Free Height 1mm Free Height .5mm Free Height .6mm Free Height .8mm Free Height 1mm Free Height MICTOR .6mm Free Height .8mm Free Height 1mm Free Height AMPMODU System 50 .6mm Free Height .8mm Free Height 1mm Free Height .5mm Free Height .6mm Free Height .8mm Free Height 1mm Free Height MICTOR .5mm Free Height .6mm Free Height .8mm Free Height MICTOR .6mm Free Height MICTOR MICTOR .6mm Free Height MICTOR MICTOR MICTOR MICTOR MICTOR MICTOR MICTOR .4mm .4mm .5mm .8mm .8mm .5mm .6mm .8mm .8mm .5mm .8mm .8mm .5mm .6mm .8mm .8mm .5mm .8mm .5mm .5mm .6mm .8mm .050" .025" .5mm .6mm .8mm .8mm .5mm .6mm .8mm 1mm .050" .5mm .8mm .8mm 1mm .025" .050" .6mm .8mm 1mm .025" .5mm .6mm .8mm 1mm .5mm .6mm .8mm 1mm .025" .6mm .8mm 1mm .050" .6mm .8mm 1mm .5mm .6mm .8mm 1mm .025" .5mm .6mm .8mm .025" .6mm .025" .025" .6mm .025" .025" .025" .025" .025" .025" .025" 10 12 14 16 Connector Sizes (No. of Positions) 20 22 24 30 34 38 40 46 50 54 56 60 64 70 76 80 84 100 Connector Sizes (No. of Positions) Continued 114 120 140 152 160 180 Global Contacts Americas Argentina - Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2211 190 200 220 228 240 266 280 320 440 Brasil - Sao Paulo Phone: +55-11-3611-1311 Fax: +55-11-3611-0397 Canada - Toronto Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: (Technical Support) Phone: +905-470-4425 Fax: +905-474-5525 Colombia - Bogota Phone: +57-1-231-9398 Fax: +57-1-660-0206 Mexico - Mexico City Phone: +52-55-1106-0800 Fax: +52-5-361-8545 For Latin/South American Countries not shown Phone: +54-11-4733-2015 Fax: +54-11-4733-2083 United States - Harrisburg, PA Phone: +717-564-0100 Fax: +717-986-7575 Product Information Center: (Technical Support) Phone: +800-522-6752 Fax: +717-986-7575 Asia/ Pacific Australia - Sydney Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 Product Information Center: (Technical Support) Phone: +61-2-9840-8200 Fax: +61-2-9634-6188 India - Bangalore Phone: +91-80-285-40800 Fax: +91-80-285-40820 Indonesia - Jakarta Phone: +65-6482-0311 Fax: +65-6482-1012 Japan - Toyko Phone: +81-44-844-8111 Fax: +81-44-812-3207 Raychem & Identification Products Phone: +81-44-844-8183 Fax: +81-44-844-8184 Product Information Center: (Technical Support) Phone: +81-44-844-8013 Fax: +81-44-812-3200 Korea - Seoul Phone: +82-2-3415-4500 Fax: +82-2-3486-3810 Malaysia - Kuala Lumpur Phone: +60-3-78053055 Fax: +60-3-78053066 New Zealand - Auckland Phone: +64-9-634-4580 Fax: +64-9-634-4586 Philippines - Makati City Phone: +632-848-0171 Fax: +632-867-8661 People's Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Shanghai Phone: Fax: +86-21-64857333/64850602 +86-21-64856222/54260190 Singapore - Singapore Phone: +65-6482-0311 Fax: +65-6482-1012 Raychem Products Phone: +65-4866-151 Fax: +65-6545-514 Identification Products Phone: +65 (0) 6482-0311 Fax: +65 (0) 6481-5514 Taiwan - Taipei Phone: +886-2-8768-2788 Fax: +886-2-8768-2268 Thailand - Bangkok Phone: +66-2-955-0500 Fax: +66-2-955-0505 Vietnam and Indochina - Ho Chi Minh City Phone: +84-8 930-5546 Fax: +84-8 930-3443 Europe/ Middle East/Africa Austria - Vienna Phone: +43-1 90 5 60-0 Fax: +43-1 90 5 60-1333 Germany - Speyer Phone: +49-6232-30-0 Fax: +49-6232-30-2243 Belgium - Kessel-Lo Phone: +32-16-35-23-00 Fax: +32-16-35-23-52 Germany - HTS Division - Neunkirchen Phone: +49-2247-305-0 Fax: +49-2247-305-122 Bulgaria - Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Great Britain - Stanmore Middlesex Phone: +44-8706-080-208 Fax: +44-1793-572-109 Product Information Center: (Technical Support) Freephone GB: 0800-267-666 Phone: +44-208-420-8341 or 8343 +44-208-420-8081 Czech Republic - Kurim Phone: +420-5-41-162-111 Fax: +420-5-41-162-223 Denmark - Glostrup Phone: +45-43-480-452 Fax: +45-43-441-414 Egypt - Cairo Phone: +20-2-290-42-81 Fax: +20-2-419-23-34 Finland - Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250 France - Cergy-Pontoise Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: (Technical Support) Phone: +33-1-3420-8943 Fax: +33-1-3420-8623 Germany - Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: (Technical Support) Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Germany - Langen Phone: +49-6103-709-0 Fax: +49-6103-709-1223 Great Britain - Raychem & Identification Products Phone: +44-1793-528171 Fax: +44-1793-572-516 Greece - Athens Phone: +30-1-9370-396/397 Fax: +30-1-9370-655 Hungary - Budapest Phone: +36-1-289-1000 Fax: +36-1-289-1010 Ireland - Dublin Phone: +353-1-820-3000 Fax: +353-1-820-9790 Israel - Yokneam Phone: +972-4-959-0508 Fax: +972-4-959-0506 Italy - Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031116 Lithuania - Vilnius Phone: +370-5-2131-402 Fax: +370-5-2131-403 Netherlands - 's-Hertogenbosch Phone: +31-73-624-62-46 Fax: +31-73-621-23-65 Product Information Center: (Technical Support) Phone: +31-73-6246-999 Fax: +31-73-6246-998 Norway - Nesbru Phone: +47-66-77-8886 Fax: +47-66-77-8855 Poland - Warsaw Phone: +48-22-45-76-700 Fax: +48-22-45-76-720 Romania - Bucharest Phone: +40-21-311-3479/3596 Fax: +40-21-312-0574 Switzerland - Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Turkey - Istanbul Phone: +90-212-281-8181/2/3 Fax: +90-212-281-8184 Ukraine - Kiev Phone: +380-044-206-2265 Fax: +380-044-206-2264 For Middle East/African Countries Not Shown Phone: +33-1-3420-8866 Fax: +33-1-3420-8300 Russia - Moscow Phone: +7-095-926-5506/07/08/09 Fax: +7-095-926-5505 Russia - St. Petersburg Phone: +7-812-718-8192 Fax: +7-812-718-8193 Slovenia - Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 South Africa - Port Elizabeth Phone: +2741-503-4500 Fax: +2741-581-0440 Spain - Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Product Information Center: (Technical Support): Phone: +34-93-291-0330 Fax: +34-93-200-3779 Sweden - Upplands Vasby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01 4 889092-2.5M-LUG-FP-9-06 Printed in the U.S.A. Tyco Electronics Corporation www.tycoelectronics.com Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Introduction to the MICTOR Interconnection System (0.64 [.025] Centerline) Product Facts 76 dedicated signal lines per linear inch Surface mount family designed for parallel and right angle board-to-board, flex-to-board and cable-toboard configurations 0.64 [.025] centerline contact spacing Redundant interfaces on mated contacts Fifteen mated stack heights available ranging from 6.60 [.260] to 31.90 [1.256] Infrared and forced air convection compatible housing materials Designed for 50-ohm systems Connector housings polarized for correct mating Built-in connector-to-board retention feature Connector can be separated by peeling from one end to the other Various packaging styles can be made available for automated assembly (tape and reel, tubes) Recognized under the Component Program of Underwriter Laboratories Inc. File No. E28476 R The MICTOR connector family is based on the microstrip concept of two rows of signal contacts divided by a center power ground plane. MICTOR connectors are motherboard and daughtercard compatible and include designs for cable-to-board applications. Various mated heights are available for parallel boardto-board systems. Custom stacking heights can be provided. The MICTOR connector family is available in 0.64 [.025] centerlines and in sizes ranging from 38 signal positions to 266 positions (in increments of 38 positions). There is a discrete ground bus every 12.7 [.50] of the connector length, which can be assigned to either power or ground in any combination. Redundant interfaces on every signal line provide added reliability. Two plating 0.635mm MICTOR Connectors options are available to meet the needs of various applications. The housing material is a liquid crystal polymer, compatible with infrared and forced air convection operations. The connector system uses the solid ground bus between the rows of signals to provide low crosstalk and excellent high-speed signal characteristics. 41 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Connector Cross Section Ground Bus Contact Compliant SMT solder lead design Center ground bus for improved signal integrity and matched impedance Signal Contact Signal Contact Receptacle Housing Receptacle Housing Redundant points of contact for high reliability Receptacle Housing 0.635mm MICTOR Connectors Receptacle Housing Plug Housing Plug Housing Signal Contact Signal Contact Ground Bus Contact Connectors are shown at point where signal contact first touch each other. Connectors are designed to be fully mated when the two "Z" datums meet. 42 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Material and Performance Specifications, MICTOR Connectors Material Specifications Material Housing -- Liquid crystal polymer, black Contacts -- High reliability copper alloy Ground Bus -- Phosphor bronze Finish (Gold Plating) Contacts and Ground Bus -- 0.00076 [.000030] min. gold on contact area, 0.00381-0.00635 [.000150-.000250] matte tin per ASTM B 545 on leads, all over 0.00177-0.00445 [.000070-.000175] nickel. Finish (Palladium-Nickel Plating) Contacts and Ground Bus -- 0.00013 [.000005] min. gold over, 0.00076 [.000030] min. palladium nickel on contact area, 0.00381-0.00635 [.000150-.000250] matte tin per ASTM B 545 on leads, all over 0.00191-0.00445 [.000075-.000175] nickel. Ratings 0.635mm MICTOR Connectors Performance Specifications Voltage -- 30 vac Current -- Signal; rated 1.0 Amps, fully derated 0.5 Amps Ground; rated 11.5 Amps, fully derated 7.6 Amps Temperature -- -55C to +125C Electrical Characteristics Characteristic Impedance -- 505 ohms at 1 ns Termination Resistance -- R 10 milliohms max.; AMP Specification 109-6-1 Insulation Resistance -- 10,000 megohms min.; AMP Specification 109-208-1 Dielectric Withstanding Voltage -- 500 vac at sea level; AMP Specification 109-29-1 Mechanical Characteristics Solderability -- Solderable area shall have a 95% min. solder coverage; AMP Specification 109-11-1 Vibration (Random) -- No discontinuities of 1s or longer duration; AMP Specification 109-21-5 Physical Shock -- No discontinuities of 1s or longer duration; AMP Specification 109-26-1 Durability (Tested to) -- Mate and unmate samples at a rate of 600 cycles max. per hour. 25 cycles, gold plating; 500 cycles, palladium-nickel plating; AMP Specification 109-27 Contact Retention -- 1 lb min.; AMP Specification 109-30 Mating Force -- 152 oz max. per 1/2 inch of connector (1 module). Each module equals 38 signal contacts and 1 ground bus; AMP Specification 109-42 Unmating Force -- 19 oz min. per 1/2 inch of connector (1 module). Each module equals 38 signal contacts and 1 ground bus; AMP Specification 109-42 Environmental Characteristics Thermal Shock -- Subject mated samples to 5 cycles between -55C and +125C; AMP Specification 109-22 Humidity - Temperature Cycling -- Subject mated samples to 10 cycles between +25C and +65C at 95% RH; AMP Specification 109-23-3, Condition B Temperature Cycling -- Subject mated samples to 1024 cycles between -40C and +60C at 2 hours per cycle; AMP Specification 109-75-1 Temperature Life -- Subject mated samples to temperature life at +118C for 792 hours; AMP Specification 109-43 Mixed Flowing Gas -- Subject mated samples to environmental class II for 14 days; AMP Specification 109-85-2 43 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Stack Height Combinations 30 Gold and Palladium Nickel Plated Vertical Connectors 9.00 [.354] Plug (Pages 47) 6.60 [.260] Plug (Pages 46) 6.60 [.260] Standard Receptacle (Pages 56 and 57) 0.635mm MICTOR Connectors Standard Receptacle (Pages 56 and 57) Raised Receptacle (Pages 58 and 59) 12.57 [.495] Plug (Pages 49) 20.00 [.785] 18.75 [.738] 18.00 [.709] Standard Receptacle (Pages 56 and 57) 12.57 [.495] Standard Receptacle (Pages 56 and 57) 11.00 [.430] Plug (Pages 48) 18.75 [.738] Plug (Pages 51) 15.60 [.615] Raised Receptacle (Pages 58 and 59) 11.00 [.430] 9.00 [.354] Standard Receptacle (Pages 56 and 57) 9.00 [.354] Plug (Pages 47) 6.60 [.260] Plug (Pages 46) 12.57 [.495] Plug (Pages 49) 11.00 [.430] Plug (Pages 48) Raised Receptacle (Pages 58 and 59) 21.60 [.850] Raised Receptacle (Pages 58 and 59) 22.86 [.900] Plug* (Pages53) 17.96 [.707] Plug (Pages 50) 20.00 [.785] Plug* (Pages 52) 18.75 [.738] Plug* (Pages 51) 22.86 [.900] Plug (Pages 53) 27.00 [1.062] 22.86 [.900] Standard Receptacle (Pages 56 and 57) Raised Receptacle (Pages 58 and 59) 27.80 [1.093] Raised Receptacle (Pages 58 and 59) 29.00 [1.143] Raised Receptacle (Pages 58 and 59) 31.90 [1.255] Raised Receptacle (Pages 58 and 59) *This connector not available in Palladium Nickel. 44 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Right Angle (Straddle Mount) Combinations 30 Gold & Palladium Nickel Connections Vertical Receptacle with Right Angle Plug 0.635mm MICTOR Connectors Right angle versions are designed for paddlecard type applications. It is highly recommended that customers who are considering right angle applications contact Tyco Electronics Vertical Plug with Right Angle Receptacle Engineering to review their applications as the potential for tolerancing issues and/or issues of solder joint integrity can be highly application specific. 45 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Vertical Plugs 6.60 [.260] Stacking Height* A 0.20 [ .008] + 0.00 B -+ 0.05 .000 [ - .002 ] 5.28 0.03 [.208 .001] Related Product Data Material and Finish -- page 43 Performance Characteristics -- page 43 Mating Receptacles -- pages 56-61 Technical Documents -- page 113 Position No. 1 Indicator 18 Spaces at 0.64 0.20 [.025 .008] = 11.43 0.20 [.450 .008] D Spaces at 12.70 0.20 [.500 .008] = E 0.20 C [ .008] *6.60 [.260] stack height when mated to vertical receptacle; 15.62 [.615] stack height when mated to vertical receptacle (extended height). 6.53 0.28 [.257 .011] Ground Bus 6.38 0.23 [.251 .009] Standard Barbless Ground Bus Leads F Housing Contact O 1.94 Ref. [.077] 8.72 [.343] Max. 0.43 0.05 [.017 .002] C Ref. 0.635mm MICTOR Connectors 1.27 [.050] 4 Spaces at 2.54 [.100] = 10.16 [.400] Pad 6.35 [.250] Position No. 2 3.53 [.139] O 0.81 0.05 [.032 .002] Hole Note: For standard applications, the orientation hole must be 2.390.05 [.094.002]; For slip-fit applications, the orientation hole must be 2.000.03 [.079.001]. 0.64 [.025] Orientation Hole (See Note) Position No. 1 R 0.13 [.005] or 0.13 [.005] x 45 PC Board Holddown Required In This Area For Connectors of 190 Positions and Larger. Size, Shape & Location at Customer's Discretion. Recommended PC Board Layout (Viewed from Connector Side) Dimensions C D No. of Pos. A B 38 25.40 1.000 22.81 .898 11.43 .450 0 -- 76 38.10 1.500 31.70 1.248 24.13 .950 1 12.70 .500 114 50.80 2.000 48.21 1.898 36.83 1.450 2 25.40 1.000 152 63.50 2.500 60.91 2.398 49.53 1.950 3 38.10 1.500 190 76.20 3.000 73.61 2.898 62.23 2.450 4 50.80 2.000 228 88.90 3.500 86.31 3.398 74.93 2.950 5 63.50 2.500 266 101.60 4.000 99.01 3.898 87.63 3.450 6 76.20 3.000 E F 1.35 [.053] 2.72 [.107] 2.64 [.104] 1.35 [.053] 2.72 [.107] 2.64 [.104] 1.35 [.053] 2.72 [.107] 2.64 [.104] 1.35 [.053] 2.72 [.107] 2.64 [.104] 1.35 [.053] 2.72 [.107] 2.64 [.104] 1.35 [.053] 2.72 [.107] 2.64 [.104] 1.35 [.053] 2.72 [.107] 2.64 [.104] Platings Solder Contact Tail Gold Sn PdNi Gold Sn PdNi Gold Sn PdNi Gold Sn PdNi Gold Sn PdNi Gold Sn PdNi Gold Sn PdNi Part Numbers Barbed G/B Leads Barbless G/B Leads T&R T&R Vacuum Caps Vacuum Caps Tube Tube With Without With Without 5767007-8 5767111-8 5767111-1 5767116-1 5767118-1 5767118-8 5767056-1 -- -- -- -- -- -- -- -- 5767117-1 5767119-1 5767119-8 5767007-9 5767111-9 5767111-2 5767116-2 5767118-2 5767118-9 5767056-2 -- -- -- -- -- -- -- -- 5767117-2 5767119-2 5767119-9 1-5767007-0 1-5767111-0 5767111-3 5767116-3 5767118-3 1-5767118-0 5767056-3 -- -- -- -- -- -- -- -- 5767117-3 5767119-3 1-5767119-0 1-5767007-1 1-5767111-1 5767111-4 5767116-4 5767118-4 1-5767118-1 5767056-4 -- -- -- -- -- -- -- -- 5767117-4 5767119-4 1-5767119-1 1-5767007-2 1-5767111-2 5767111-5 5767116-5 5767118-5 1-5767118-2 5767056-5 -- -- -- -- -- -- -- -- 5767117-5 5767119-5 1-5767119-2 1-5767007-3 -- -- 5767116-6 -- -- 5767056-6 -- -- -- -- -- -- -- -- 5767117-6 -- -- 1-5767007-4 -- -- 5767116-7 -- -- 5767056-7 -- -- -- -- -- -- -- -- 5767117-7 -- -- Note: Part Numbers are RoHS compliant. 46 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Vertical Plugs (Continued) 9.00 [.354] Stacking Height* A 0.20 [ .008] + 0.00 B -+ 0.05 .000 [ - .002 ] Related Product Data Material and Finish -- page 43 Performance Characteristics -- page 43 Mating Receptacles -- pages 56-61 Technical Documents -- page 113 5.28 0.03 [.208 .001] Position No. 1 Indicator 18 Spaces at 0.64 0.20 [.025 .008] = 11.43 0.20 [.450 .008] C * 9.00 [.354] stack height when mated to vertical receptacle; 18.00 [.709] stack height when mated to vertical receptacle (extended height). D Spaces at 12.70 0.20 [.500 .008] = E 0.20 [ .008] 8.86 0.28 [.349 .011] Ground Bus 8.71 0.20 [.343 .008] Housing Contact Standard Ground Bus Leads F 8.33 [.328] Max. O 1.94 Ref. [.077] 0.635mm MICTOR Connectors 0.43 0.05 [.017 .002] C Ref. 1.27 [.050] Note: For standard applications, the orientation hole must be 2.390.05 [.094.002]; For slip-fit applications, the orientation hole must be 2.000.03 [.079.001]. 4 Spaces at 2.54 [.100] = 10.16 [.400] Pad 6.35 [.250] Position No. 2 3.53 [.139] O 0.81 0.05 [.032 .002] Hole 0.64 [.025] Orientation Hole (See Note) Position No. 1 R 0.13 [.005] or 0.13 [.005] x 45 PC Board Holddown Required In This Area For Connectors of 190 Positions and Larger. Size, Shape & Location at Customer's Discretion. Recommended PC Board Layout (Viewed from Connector Side) Dimensions C D No. of Pos. A B 38 25.40 1.000 22.81 .898 11.43 .450 0 -- 76 38.10 1.500 31.70 1.248 24.13 .950 1 12.70 .500 114 50.80 2.000 48.21 1.898 36.83 1.450 2 25.40 1.000 152 63.50 2.500 60.91 2.398 49.53 1.950 3 38.10 1.500 190 76.20 3.000 73.61 2.898 62.23 2.450 4 50.80 2.000 228 88.90 3.500 86.31 3.398 74.93 2.950 5 63.50 2.500 266 101.60 4.000 99.01 3.898 87.63 3.450 6 76.20 3.000 E F 1.52 2.74 1.52 2.74 1.52 2.74 1.52 2.74 1.52 2.74 1.52 2.74 1.52 2.74 [.060] [.108] [.060] [.108] [.060] [.108] [.060] [.108] [.060] [.108] [.060] [.108] [.060] [.108] Platings Solder Contact Tail Sn Sn Sn Sn Sn Sn Sn Gold PdNi Gold PdNi Gold PdNi Gold PdNi Gold PdNi Gold PdNi Gold PdNi Part Numbers Barbed G/B Leads Tube 5767139-1 5767140-1 5767139-2 5767140-2 5767139-3 5767140-3 5767139-4 5767140-4 5767139-5 5767140-5 5767139-6 5767140-6 5767139-7 5767140-7 Note: Part Numbers are RoHS compliant. 47 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Vertical Plugs (Continued) 11.00 [.430] Stacking Height* A 0.20 [ .008] + 0.00 B -+ 0.05 .000 [ - .002 ] 5.28 0.03 [.208 .001] Related Product Data Material and Finish -- page 43 Performance Characteristics -- page 43 Mating Receptacles -- pages 56-61 Technical Documents -- page 113 Position No. 1 Indicator 18 Spaces at 0.64 0.20 [.025 .008] = 11.43 0.20 [.450 .008] D Spaces at 12.70 0.20 [.500 .008] = E 0.20 C [ .008] * 11.00 [.430] stack height when mated to vertical receptacle; 19.94 [.785] stack height when mated to vertical receptacle (extended height). 10.79 0.28 [.425 .011] Ground Bus Housing 10.64 0.20 [.419 .008] Contact Standard Ground Bus Leads 0.635mm MICTOR Connectors F 8.72 [.343] Max. O 1.94 Ref. [.077] 0.43 0.05 [.017 .002] C Ref. 1.27 [.050] 4 Spaces at 2.54 [.100] = 10.16 [.400] Pad 6.35 [.250] Position No. 2 3.53 [.139] O 0.81 0.05 [.032 .002] Hole 0.64 [.025] Orientation Hole (See Note) Position No. 1 Note: For standard applications, the orientation hole must be 2.390.05 [.094.002]; For slip-fit applications, the orientation hole must be 2.000.03 [.079.001]. R 0.13 [.005] or 0.13 [.005] x 45 PC Board Holddown Required In This Area For Connectors of 190 Positions and Larger. Size, Shape & Location at Customer's Discretion. Recommended PC Board Layout (Viewed from Connector Side) Dimensions C D No. of Pos. A B 38 25.40 1.000 22.81 .898 11.43 .450 0 -- 76 38.10 1.500 31.70 1.248 24.13 .950 1 12.70 .500 114 50.80 2.000 48.21 1.898 36.83 1.450 2 25.40 1.000 152 63.50 2.500 60.91 2.398 49.53 1.950 3 38.10 1.500 190 76.20 3.000 73.61 2.898 62.23 2.450 4 50.80 2.000 228 88.90 3.500 86.31 3.398 74.93 2.950 5 63.50 2.500 266 101.60 4.000 99.01 3.898 87.63 3.450 6 76.20 3.000 E F 1.52 [.060] 2.64 [.104] 1.52 [.060] 2.64 [.104] 1.52 [.060] 2.64 [.104] 1.52 [.060] 2.64 [.104] 1.52 [.060] 2.64 [.104] 1.52 [.060] 2.64 [.104] 1.52 [.060] 2.64 [.104] Platings Solder Contact Tail Sn Sn Sn Sn Sn Sn Sn Gold PdNi Gold PdNi Gold PdNi Gold PdNi Gold PdNi Gold PdNi Gold PdNi Part Numbers Barbed G/B Leads Barbless G/B Leads T&R T&R Vacuum Caps Vacuum Caps Tube Tube With Without With Without 5767003-9 5767123-8 5767123-1 -- -- -- 5767087-1 -- -- -- -- -- 1-5767003-0 5767123-9 5767123-2 -- -- -- 5767087-2 -- -- -- -- -- 1-5767003-1 1-5767123-0 5767123-3 1-5767182-3 1-5767183-0 -- 5767087-3 -- -- -- -- -- 5767003-8 -- -- -- -- -- 5767087-4 -- -- -- -- -- 1-5767003-2 1-5767123-2 5767123-5 -- -- -- 5767087-5 -- -- -- -- -- 1-5767003-3 -- -- -- -- -- 5767087-6 -- -- -- -- -- 1-5767003-4 -- -- -- -- -- 5767087-7 -- -- -- -- -- Note: Part Numbers are RoHS compliant. 48 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Vertical Plugs (Continued) 12.57 [.495] Stacking Height* A 0.20 [ .008] + 0.00 B -+ 0.05 .000 [ - .002 ] Related Product Data Material and Finish -- page 43 Performance Characteristics -- page 43 Mating Receptacles -- pages 56-61 Technical Documents -- page 113 5.28 0.03 [.208 .001] Position No. 1 Indicator 18 Spaces at 0.64 0.20 [.025 .008] = 11.43 0.20 [.450 .008] D Spaces at 12.70 0.20 [.500 .008] = E 0.20 C [ .008] * 12.57 [.495] stack height when mated to vertical receptacle; 21.59 [.850] stack height when mated to vertical receptacle (extended height). 12.45 0.28 [.490 .011] Ground Bus 12.29 0.20 [.484 .008] Housing Contact Standard Ground Bus Leads F 8.72 [.343] Max. O 1.94 Ref. [.077] 0.635mm MICTOR Connectors 0.43 0.05 [.017 .002] C Ref. 1.27 [.050] 4 Spaces at 2.54 [.100] = 10.16 [.400] Pad 6.35 [.250] Position No. 2 3.53 [.139] O 0.81 0.05 [.032 .002] Hole Note: For standard applications, the orientation hole must be 2.390.05 [.094.002]; For slip-fit applications, the orientation hole must be 2.000.03 [.079.001]. 0.64 [.025] Orientation Hole (See Note) Position No. 1 R 0.13 [.005] or 0.13 [.005] x 45 PC Board Holddown Required In This Area For Connectors of 190 Positions and Larger. Size, Shape & Location at Customer's Discretion. Recommended PC Board Layout (Viewed from Connector Side) Dimensions No. of Pos. A B C D E 38 25.40 1.000 22.81 .898 11.43 .450 0 -- 76 38.10 1.500 31.70 1.248 24.13 .950 1 12.70 .500 114 50.80 2.000 48.21 1.898 36.83 1.450 2 25.40 1.000 152 63.50 2.500 60.91 2.398 49.53 1.950 3 38.10 1.500 190 76.20 3.000 73.61 2.898 62.23 2.450 4 50.80 2.000 228 88.90 3.500 86.31 3.398 74.93 2.950 5 63.50 2.500 266 101.60 4.000 99.01 3.898 87.63 3.450 6 76.20 3.000 F 1.52 [.060] 2.64 [.104] 1.52 [.060] 2.64 [.104] 1.52 [.060] 2.64 [.104] 1.52 [.060] 2.64 [.104] 1.52 [.060] 2.64 [.104] 1.52 [.060] 2.64 [.104] 1.52 [.060] 2.64 [.104] Platings Solder Contact Tail Sn Sn Sn Sn Sn Sn Sn Gold PdNi Gold PdNi Gold PdNi Gold PdNi Gold PdNi Gold PdNi Gold PdNi Tube 5767005-8 5767057-1 5767005-9 5767057-2 1-5767005-0 5767057-3 1-5767005-1 5767057-4 1-5767005-2 5767057-5 1-5767005-3 5767057-6 1-5767005-4 5767057-7 Part Numbers Barbed G/B Leads Barbless G/B Leads T&R T&R Vacuum Caps Vacuum Caps Tube With Without With Without 5767149-1 5767149-8 5767120-1 5767121-1 5767121-8 -- -- 5767082-1 -- -- 5767149-2 5767149-9 5767120-2 5767121-2 5767121-9 -- -- 5767082-2 -- -- 5767149-3 1-5767149-0 5767120-3 5767121-3 1-5767121-0 -- -- 5767082-3 -- -- 5767149-4 1-5767149-1 5767120-4 5767121-4 1-5767121-1 -- -- 5767082-4 5767127-4 1-5767127-1 5767149-5 1-5767149-2 5767120-5 -- -- -- -- 5767082-5 5767127-5 1-5767121-2 -- -- 5767120-6 -- -- -- -- 5767082-6 -- -- -- -- 5767120-7 -- -- -- 1-5767151-4 5767082-7 -- -- Note: Part Numbers are RoHS complian. 49 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Vertical Plugs (Continued) 17.96 [.707] Stacking Height* A 0.20 [ .008] + 0.00 5.28 0.03 [.208 .001] B -+ 0.05 .000 [ - .002 ] Related Product Data Material and Finish -- page 43 Performance Characteristics -- page 43 Mating Receptacles -- pages 56-61 Technical Documents -- page 113 8.13 [.320] 18 Spaces at 0.64 0.15 [.025 .006] = 11.43 0.15 [.450 .006] C Position No. 1 Indicator D Spaces at 12.70 0.15 [.500 .006] = E 0.15 [ .006] * 17.96 [.707] stack height when mated to vertical receptacle; 26.97 [1.062] stack height when mated to vertical receptacle (extended height). Ground Bus Plug Housing 17.75 0.28 [.699 .011] 14.71 [.579] Ref. Extension Housing Contact Standard Ground Bus Leads 0.635mm MICTOR Connectors 1.32 [.052] 1.35 [.053] 0.43 0.05 [.017 .002] C Ref. 1.27 [.050] 4 Spaces at 2.54 [.100] = 10.16 [.400] Pad 6.35 [.250] Position No. 2 3.53 [.139] Notes: 1. For dual application, the orientation hole must be 1.980.03 [.078.001]. See Application Specification 114-11004 for details. 2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics. O 0.81 0.05 [.032 .002] Hole 0.64 [.025] 2.39 0.05 [.094 .002] Orientation Hole Position No. 1 R 0.13 [.005] or 0.13 [.005] x 45 PC Board Holddown Required In This Area For Connectors of 190 Positions and Larger. Size, Shape & Location at Customer's Discretion. Recommended PC Board Layout (Connector Side of Board Shown) No. of Pos. 38 76 114 152 190 228 266 A 25.40 1.000 38.10 1.500 50.80 2.000 63.50 2.500 76.20 3.000 88.90 3.500 101.60 4.000 B 22.81 .898 35.51 1.398 48.21 1.898 60.91 2.398 73.61 2.898 86.31 3.398 99.00 3.898 Dimensions C 11.43 .450 24.13 .950 36.83 1.450 49.53 1.950 62.23 2.450 74.93 2.950 87.63 3.450 D 0 1 2 3 4 5 6 E 0.00 .000 12.70 .500 25.40 1.000 38.10 1.500 50.80 2.000 63.50 2.500 76.20 3.000 Part Numbers 5767025-1 5767025-2 5767025-3 5767025-4 5767025-5 5767025-6 5767025-7 Note: Part Numbers are RoHS compliant. 50 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Vertical Plugs (Continued) 18.75 [.738] Stacking Height* A Related Product Data 0.20 [ .008] + 0.00 5.28 0.03 [.208 .001] B -+ 0.05 .000 [ - .002 ] Material and Finish -- page 43 Performance Characteristics -- page 43 Mating Receptacles -- pages 56-61 Technical Documents -- page 113 8.13 [.320] 18 Spaces at 0.64 0.15 [.025 .006] = 11.43 0.15 [.450 .006] * 18.75 [.738] stack height when mated to vertical receptacle; 27.76 [1.093] stack height when mated to vertical receptacle (extended height). C Position No. 1 Indicator D Spaces at 12.70 0.15 [.500 .006] = E 0.15 [ .006] Ground Bus Plug Housing 18.47 0.28 [.727 .011] 15.49 [.610] Ref. Extension Housing 0.635mm MICTOR Connectors Contact Standard Ground Bus Leads 1.45 [.057] 8.72 [.343] Max. 1.32 [.052] 0.43 0.05 [.017 .002] C Ref. 1.27 [.050] 4 Spaces at 2.54 [.100] = 10.16 [.400] Pad 6.35 [.250] Position No. 2 3.53 [.139] O 0.81 0.05 [.032 .002] Hole 0.64 [.025] 2.39 0.05 [.094 .002] Orientation Hole Position No. 1 R 0.13 [.005] or 0.13 [.005] x 45 PC Board Holddown Required In This Area For Connectors of 190 Positions and Larger. Size, Shape & Location at Customer's Discretion. Recommended PC Board Layout (Connector Side of Board Shown) No. of Pos. 38 76 114 152 190 228 266 A 25.40 1.000 38.10 1.500 50.80 2.000 63.50 2.500 76.20 3.000 88.90 3.500 101.60 4.000 B 22.81 .898 35.51 1.398 48.21 1.898 60.91 2.398 73.61 2.898 86.31 3.398 99.00 3.898 Dimensions C 11.43 .450 24.13 .950 36.83 1.450 49.53 1.950 62.23 2.450 74.93 2.950 87.63 3.450 D 0 1 2 3 4 5 6 E 0.00 .000 12.70 .500 25.40 1.000 38.10 1.500 50.80 2.000 63.50 2.500 76.20 3.000 Part Numbers 5767042-1 5767042-2 5767042-3 5767042-4 5767042-5 5767042-6 5767042-7 Note: Part Numbers are RoHS compliant. 51 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Vertical Plugs (Continued) 20.00 [.785] Stacking Height* A Related Product Data 0.20 [ .008] + 0.00 5.28 0.03 [.208 .001] B -+ 0.05 .000 [ - .002 ] Material and Finish -- page 43 Performance Characteristics -- page 43 Mating Receptacles -- pages 56-61 Technical Documents -- page 113 8.13 [.320] 18 Spaces at 0.64 0.15 [.025 .006] = 11.43 0.15 [.450 .006] * 20.02 [.788] stack height when mated to vertical receptacle; 29.03 [1.143] stack height when mated to vertical receptacle (extended height). C Position No. 1 Indicator D Spaces at 12.70 0.15 [.500 .006] = E 0.15 [ .006] Ground Bus Plug Housing 19.81 0.28 [.780 .011] 16.76 [.660] Ref. 0.635mm MICTOR Connectors Extension Housing Contact Standard Ground Bus Leads 1.32 [.052] 1.35 [.053] 0.43 0.05 [.017 .002] C Ref. 1.27 [.050] Notes: 1. For dual application, the orientation hole must be 1.980.03 [.078.001]. See Application Specification 114-11004 for details. 2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics. 4 Spaces at 2.54 [.100] = 10.16 [.400] Pad 6.35 [.250] Position No. 2 3.53 [.139] O 0.81 0.05 [.032 .002] 0.64 [.025] Hole 2.39 0.05 [.094 .002] Orientation Hole Position No. 1 R 0.13 [.005] or 0.13 [.005] x 45 PC Board Holddown Required In This Area For Connectors of 190 Positions and Larger. Size, Shape & Location at Customer's Discretion. Recommended PC Board Layout (Connector Side of Board Shown) No. of Pos. 38 76 114 152 190 228 266 A 25.40 1.000 38.10 1.500 50.80 2.000 63.50 2.500 76.20 3.000 88.90 3.500 101.60 4.000 B 22.81 .898 35.51 1.398 48.21 1.898 60.91 2.398 73.61 2.898 86.31 3.398 99.00 3.898 Dimensions C 11.43 .450 24.13 .950 36.83 1.450 49.53 1.950 62.23 2.450 74.93 2.950 87.63 3.450 D 0 1 2 3 4 5 6 E 0.00 .000 12.70 .500 25.40 1.000 38.10 1.500 50.80 2.000 63.50 2.500 76.20 3.000 Part Numbers 5767032-1 5767032-2 5767032-3 5767032-4 5767032-5 5767032-6 5767032-7 Note: Part Numbers are RoHS compliant. 52 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Vertical Plugs (Continued) 22.86 [.900] Stacking Height* A Related Product Data 0.20 [ .008] + 0.00 5.28 0.03 [.208 .001] B -+ 0.05 .000 [ - .002 ] Material and Finish -- page 43 Performance Characteristics -- page 43 Mating Receptacles -- pages 56-61 Technical Documents -- page 113 8.13 [.320] 18 Spaces at 0.64 0.15 [.025 .006] = 11.43 0.15 [.450 .006] * 22.86 [.900] stack height when mated to vertical receptacle; 31.89 [1.255] stack height when mated to vertical receptacle (extended height). C Position No. 1 Indicator D Spaces at 12.70 0.15 [.500 .006] = E 0.15 [ .006] Ground Bus Plug Housing 22.66 0.28 [.892 .011] 19.61 [.772] Ref. Extension Housing 0.635mm MICTOR Connectors Contact Standard Ground Bus Leads 1.32 [.052] 1.35 [.053] 0.43 0.05 [.017 .002] C Ref. 1.27 [.050] Notes: 1. For dual application, the orientation hole must be 1.980.03 [.078.001]. See Application Specification 114-11004 for details. 2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics. 4 Spaces at 2.54 [.100] = 10.16 [.400] Pad 6.35 [.250] Position No. 2 3.53 [.139] O 0.81 0.05 [.032 .002] 0.64 [.025] Hole 2.39 0.05 [.094 .002] Orientation Hole Position No. 1 R 0.13 [.005] or 0.13 [.005] x 45 PC Board Holddown Required In This Area For Connectors of 190 Positions and Larger. Size, Shape & Location at Customer's Discretion. Recommended PC Board Layout (Connector Side of Board Shown) No. of Pos. 38 76 114 152 190 228 266 A 25.40 1.000 38.10 1.500 50.80 2.000 63.50 2.500 76.20 3.000 88.90 3.500 101.60 4.000 B 22.81 .898 35.51 1.398 48.21 1.898 60.91 2.398 73.61 2.898 86.31 3.398 99.00 3.898 Dimensions C 11.43 .450 24.13 .950 36.83 1.450 49.53 1.950 62.23 2.450 74.93 2.950 87.63 3.450 D 0 1 2 3 4 5 6 E 0.00 .000 12.70 .500 25.40 1.000 38.10 1.500 50.80 2.000 63.50 2.500 76.20 3.000 Part Numbers 5767017-1 5767017-2 5767017-3 5767017-4 5767017-5 5767017-6 5767017-7 Note: Part Numbers are RoHS compliant. 53 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Right Angle Plugs Related Product Data Material and Finish -- page 43 Performance Characteristics -- page 43 Mating Receptacles -- pages 56-61 Technical Documents -- page 113 A 0.20 [ .008] + 0.00 B -+ 0.05 .000 [ - .002 ] 5.28 0.03 [.208 .001] Position No. 1 Indicator Ground Bus 6.38 0.23 [.251 .009] 3.53 [.139] Max. Housing Contact 1.50 [.059 .018 .007] 18 Spaces at 0.64 0.20 [.025 .008] = 11.43 0.20 [.450 .008] C 0.20 [ .008] C Ref. O 1.02 0.05 Hole [.040 .002] 0.635mm MICTOR Connectors F D Spaces at 12.70 0.20 [.500 .008] = E 0.05 0.36 +- 0.02 + .002 [.014 - .001 ] Pad 4 Spaces at 2.54 [.100] = 10.16 [.400] 4.80 [.189] 0.81 [.032] 2.59 [.102] 3.73 [.147] 0.43 0.05 [.017 .002] 1.78 [.070] 0.64 [.025] 2.41 0.05 Orientation Hole [.095 .002] Position No. 1 This Side R 0.13 [.005] or 0.13 [.005] x 45 Recommended PC Board Layout (Mirror Image on Opposite Side) 54 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Right Angle Plugs (Continued) No. of Pos. 38 76 114 190 228 266 A 25.40 1.000 38.10 1.500 50.80 2.000 63.50 2.500 76.20 3.000 88.90 3.500 101.60 4.000 B 22.81 .898 35.51 1.398 48.21 1.898 60.91 2.398 73.61 2.898 86.31 3.398 99.00 3.898 C 11.43 .450 24.13 .950 36.83 1.450 49.53 1.950 62.23 2.450 74.93 2.950 87.63 3.450 D 0 1 2 3 4 5 6 E 0.00 .000 12.70 .500 25.40 1.000 38.10 1.500 50.80 2.000 63.50 2.500 76.20 3.000 F 1.52 .060 1.52 .060 2.31 .091 1.52 .060 1.52 .060 2.31 .091 2.97 .117 1.52 .060 1.52 .060 2.31 .091 1.52 .060 1.52 .060 2.31 .091 1.52 .060 1.52 .060 2.31 .091 1.52 .060 1.52 .060 2.31 .091 1.52 .060 1.52 .060 2.31 .091 Platings Solder Contact Tail Part Numbers Tube Sn Gold 5767006-1 Sn PdNi 5767055-1 Sn PdNi 5767039-1 Sn Gold 5767006-2 Sn PdNi 5767055-2 Sn PdNi 5767039-2 Sn PdNi 5767170-2 Sn Gold 5767006-3 Sn PdNi 5767055-3 Sn PdNi 5767039-3 Sn Gold 5767006-4 Sn PdNi 5767055-4 Sn PdNi 5767039-4 Sn Gold 5767006-5 Sn PdNi 5767055-5 Sn PdNi 5767039-5 Sn Gold 5767006-6 Sn PdNi 5767055-6 Sn PdNi 5767039-6 Sn Gold 5767006-7 Sn PdNi 5767055-7 Sn PdNi 5767039-7 0.635mm MICTOR Connectors 152 Dimensions Note: Part Numbers are RoHS compliant. 55 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Vertical Receptacles Related Product Data Material and Finish -- page 43 Performance Characteristics -- page 43 Mating Plugs -- pages 46-55 Technical Documents -- page 113 A Position No. 1 Indicator + 0.08 B -+ 0.00 .003 [ - .000 ] 5.38 0.06 [.212 .002] 6.91 [.272] 18 Spaces at 0.64 0.20 [.025 .008] = 11.43 0.20 [.450 .008] D Spaces at 12.70 0.20 [.500 .008] = E 0.20 C [ .008] 6.10 0.25 [.240 .010] Ground Bus 5.99 0.15 [.236 .006] 0.635mm MICTOR Connectors F 0.15 [ .006] Standard Ground Bus Leads 2.69 [.106] 2.26 [.089] 2.74 [.108] 6.43 [.253] 2.26 [.089] 2.74 [.108] 1.35 0.15 [.053 .006] Contact Housing 0.18 Ref. [.007] O 1.94 Ref. [.077] 8.72 [.343] Max. 0.43 0.05 [.017 .002] C Ref. 1.27 [.050] 4 Spaces at 2.54 [.100] = 10.16 [.400] Pad 6.35 [.250] Position No. 1 3.53 [.139] O 0.81 0.05 [.032 .002] Dia. Typ. For Barbed Parts; O 0.64 0.05 [.025 .002] Dia. Typ. For Barbless Parts 0.64 [.025] R 0.13 [.005] or 0.13 [.005] x 45 Orientation Hole (See Note) Position No. 2 PC Board Holddown Required In This Area For Connectors of 190 Positions and Larger. Size, Shape & Location at Customer's Discretion. Recommended PC Board Layout (Connector Side of Board Shown) Note: For standard applications, orientation hole to be O 2.390.05 [.094.002]; For slip-fit applications, orientation hole to be O 2.000.03 [.079.001]. 56 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Vertical Receptacles (Continued) Dimensions C D A B 38 25.40 1.000 22.86 .900 11.43 .450 38.10 1.500 35.56 1.400 24.13 .950 1 50.80 2.000 48.26 1.900 36.83 1.450 2 63.50 2.500 60.96 2.400 49.53 1.950 3 76.20 3.000 73.66 2.900 62.23 2.450 88.90 3.500 86.36 3.400 74.93 2.950 5 101.60 4.000 99.06 3.900 87.63 3.450 6 76 114 152 190 228 266 0 4 E -- 12.70 .500 25.40 1.000 38.10 1.500 50.80 2.000 63.50 2.500 76.20 3.000 F 1.40 .055 Tube Part Numbers Barbed G/B Leads Barbless G/B Leads T&R T&R Vacuum Caps Vacuum Caps Tube With Without With Without Sn Gold 2-5767004-2 5767096-8 5767096-1 5767110-1 5767114-1 2.74 .108 Sn Gold PdNi 5767181-1 5767054-1 -- 5767171-1 -- -- -- 5767081-1 -- 5767115-1 5767114-8 1.40 .055 Sn Gold 2-5767004-3 5767096-9 5767096-2 5767110-2 5767114-2 2.74 .108 Sn Gold PdNi 5767181-2 5767054-2 -- -- -- -- -- 5767081-2 -- 5767115-2 -- -- 1.40 .055 1-5767096-0 5767096-3 5767110-3 5767114-3 1-5767114-0 -- -- -- -- -- 5767081-3 -- 5767115-3 -- -- 1-5767096-1 5767096-4 5767110-4 5767114-4 1-5767114-1 -- -- -- -- -- 5767081-4 -- 5767115-4 -- -- -- -- 5767114-9 Sn Gold 2-5767004-4 2.74 .108 Sn Gold PdNi 5767181-3 5767054-3 1.40 .055 Sn Gold 2-5767004-5 2.74 .108 Sn Gold PdNi 5767181-4 5767054-4 1.40 .055 Sn Gold 2-5767004-6 1-5767096-2 5767096-5 5767110-5 5767114-5 1-5767114-2 2.74 .108 Sn Gold PdNi 5767181-5 5767054-5 -- -- -- -- -- 5767081-5 -- 5767115-5 -- -- 1.40 .055 Sn Gold 2-5767004-7 -- -- 5767110-6 -- -- 2.74 .108 Sn Gold PdNi 5767181-6 5767054-6 -- -- -- -- -- 5767081-6 -- -- -- -- 1.40 .055 Sn Gold 2-5767004-8 -- -- 5767110-7 -- -- Sn Gold PdNi 5767181-7 5767054-7 -- -- -- -- -- 5767081-7 -- -- -- -- 2.74 .108 0.635mm MICTOR Connectors No. of Pos. Platings Solder Contact Tail Note: Part Numbers are RoHS compliant. 57 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Vertical Receptacles (Extended Height) Related Product Data Material and Finish -- page 43 Performance Characteristics -- page 43 Mating Plugs -- pages 46-55 Technical Documents -- page 113 A + 0.08 B -+ 0.00 .003 [ - .000 ] Position No. 1 Indicator 5.38 0.06 6.91 8.00 [.212 .002] [.272] [.315] When mated with a standard vertical plug, this extended height receptacle adds 9.017 [.355] to the mated stack height when compared with the standard height vertical receptacle. 18 Spaces at 0.64 0.20 [.025 .008] = 11.43 0.20 [.450 .008] C D Spaces at 12.70 0.20 [.500 .008] = E 0.20 [ .008] 15.01 0.25 [.591 .010] Ground Bus Contact Housing 14.91 0.15 [.587 .006] 0.635mm MICTOR Connectors F 0.15 [ .006] Standard Ground Bus Leads O 1.94 Ref. [.077] 8.72 [.343] Max. 0.43 0.05 [.017 .002] C Ref. 1.27 [.050] 4 Spaces at 2.54 [.100] = 10.16 [.400] Pad 6.35 [.250] Position No. 1 3.53 [.139] O 0.81 0.05 [.032 .002] Dia. Typ. For Barbed Parts; O 0.64 0.05 [.025 .002] Dia. Typ. For Barbless Parts 0.64 [.025] R 0.13 [.005] or 0.13 [.005] x 45 Orientation Hole PC Board Holddown Required in This Area For Connectors of 190 Positions and Larger. Size, Shape & Location at Customer's Discretion. Recommended PC Board Layout (Connector Side of Board Shown) 58 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Vertical Receptacles (Extended Height) (Continued) Dimensions C D A B 38 25.40 1.000 22.86 .900 11.43 .450 0 -- 76 38.10 1.500 35.56 1.400 24.13 .950 1 12.70 .500 114 50.80 2.000 48.26 1.900 36.83 1.450 2 25.40 1.000 152 63.50 2.500 60.96 2.400 49.53 1.950 3 38.10 1.500 190 76.20 3.000 73.66 2.900 62.23 2.450 4 50.80 2.000 228 88.90 3.500 86.36 3.400 74.93 2.950 5 63.50 2.500 266 101.60 4.000 99.06 3.900 87.63 3.450 6 76.20 3.000 E F 1.37 [.054] 1.37 [.054] 2.72 [.107] 1.37 [.054] 1.37 [.054] 2.72 [.107] 1.37 [.054] 1.37 [.054] 2.72 [.107] 1.37 [.054] 1.37 [.054] 2.72 [.107] 1.37 [.054] 1.37 [.054] 2.72 [.107] 1.37 [.054] 1.37 [.054] 2.72 [.107] 1.37 [.054] 1.37 [.054] 2.72 [.107] Gold Sn PdNi Gold Sn PdNi Gold Sn PdNi Gold Sn PdNi Gold Sn PdNi Gold Sn PdNi Gold Sn PdNi Tube 5767130-1 5767094-1 5767154-1 5767130-2 5767094-2 5767154-2 5767130-3 5767094-3 5767154-3 5767130-4 5767094-4 5767154-4 5767130-5 5767094-5 5767154-5 5767130-6 5767094-6 5767154-6 5767130-7 5767094-7 5767154-7 Part Numbers Barbed G/B Leads Barbless G/B Leads T&R T&R Vacuum Caps Vacuum Caps Tube With Without With Without 5767146-1 5767146-8 -- -- -- 5767178-1 6761316-8 -- -- -- -- 5767153-8 5767095-1 -- -- 5767146-2 5767146-9 -- -- -- 5767178-2 -- -- -- -- -- 5767153-9 5767095-2 -- -- 5767146-3 1-5767146-0 -- -- -- -- -- -- -- -- -- 1-5767153-0 5767095-3 5767145-3 1-5767145-0 5767146-4 1-5767146-1 -- -- -- -- -- -- -- -- -- 1-5767153-1 5767095-4 -- 1-5767145-1 -- -- -- -- -- 5767178-5 1-6761316-2 -- -- -- -- 1-5767153-2 5767095-5 -- -- -- -- -- -- -- -- -- -- -- -- -- 1-5767153-3 5767095-6 -- -- -- -- -- -- -- -- -- -- -- -- -- 1-5767153-4 5767095-7 -- -- 0.635mm MICTOR Connectors No. of Pos. Platings Solder Contact Tail Note: Part Numbers are RoHS compliant. 59 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Right Angle Receptacles Related Product Data Material and Finish -- page 43 Performance Characteristics -- page 43 Mating Plugs -- pages 46-55 Application Tooling -- page 62 Technical Documents -- page 113 A + 0.08 Position No. 1 Indicator B -+ 0.00 .003 [ - .000 ] 6.91 [.272] 5.38 0.05 [.212 .002] 5.99 0.15 [.236 .006] 1.50 [.059] 18 Spaces at 0.64 0.20 [.025 .008] = 11.43 0.20 [.450 .008] C 3.76 [.148] Max. F D Spaces at 12.70 0.20 [.500 .008] = E 0.20 [ .008] C Ref. O 1.02 0.05 Hole [.040 .002] 0.635mm MICTOR Connectors Ground Bus Contact Housing 0.05 0.36 +- 0.02 + .002 [.014 - .001 ] Pad 4 Spaces at 2.54 [.100] = 10.16 [.400] 4.80 [.189] 0.81 [.032] 2.59 [.102] 3.73 [.147] 0.43 0.05 [.017 .002] 1.78 [.070] 0.64 [.025] 2.41 0.05 Orientation Hole [.095 .002] Position No. 1 Far Side R 0.13 [.005] or 0.13 [.005] x 45 Recommended PC Board Layout (Mirror image on opposite side) PC Board Thickness: 1.57 [.062] 60 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) MICTOR Right Angle Receptacles (Continued) Dimensions No. of Pos. A B C 38 25.40 1.000 22.86 .900 11.43 .450 76 114 152 190 266 50.80 2.000 63.50 2.500 76.20 3.000 88.90 3.500 101.60 4.000 35.56 1.400 48.26 1.900 60.96 2.400 73.66 2.900 86.36 3.400 99.06 3.900 24.13 .950 36.83 1.450 49.53 1.950 62.23 2.450 74.93 2.950 87.63 3.450 E 0 0.00 .000 1 2 3 4 5 6 12.70 .500 25.40 1.000 38.10 1.500 50.80 2.000 63.50 2.500 76.20 3.000 F 1.52 .060 2.31 .091 Part Numbers Tube 5767143-1 5767044-1 Sn PdNi 5767089-1 1.52 .060 Sn Gold PdNi 5767143-2 5767044-2 2.31 .091 Sn PdNi 5767089-2 1.52 .060 Sn Gold PdNi 5767143-3 5767044-3 2.31 .091 Sn PdNi 5767089-3 1.52 .060 Sn Gold PdNi 5767143-4 5767044-4 2.31 .091 Sn PdNi 5767089-4 1.52 .060 Sn Gold PdNi 5767143-5 5767044-5 2.31 .091 Sn PdNi 5767089-5 1.52 .060 Sn Gold PdNi 5767143-6 5767044-6 2.31 .091 Sn PdNi 5767089-6 1.52 .060 Sn Gold PdNi 5767143-7 5767044-7 2.31 .091 Sn PdNi 5767089-7 0.635mm MICTOR Connectors 228 38.10 1.500 D Platings Solder Contact Tail Gold Sn PdNi Note: Part Numbers are RoHS compliant. 61 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Application Tooling for MICTOR Right Angle Connectors Two operations must be performed so that the MICTOR right angle connector can be successfully installed on a PC board. First, the board must be slit for the ground/bus bar. At the customer's option, this operation may be done at the time of board manufacture. Second, the right angle connector must be properly placed on the board. 0.635mm MICTOR Connectors Tyco Electronics offers bench-mount tooling for slitting the PC board (see below) and a free-standing tool for installing the connector (shown at the right). AMP Application Specification No. 114-11004 and Instruction Sheets are available to provide the necessary instructions and recommendations for proper tool use. Application Specification No. 114-13008 for Right Angle. Application Tool Number 767511-1 (Instruction Sheet No. 408-4335) Replacement Components for Tool Number 767511-1 Connector Size (No. of Positions) 38 76 114 152 190 228 266 Board Locator Pin Round Diamond 767523-1 767523-1 767523-1 767523-1 767523-1 767523-1 767523-1 767526-1 767526-1 767526-1 767526-1 767526-1 767526-1 767526-1 Plug Inserter Receptacle Inserter Support Pillar 767514-1 767514-2 767514-3 767514-4 767514-5 767514-6 767514-7 767570-1 767570-2 767570-3 767570-4 767570-5 767570-6 767570-7 767522-1 767522-1 767522-1 767522-1 767522-1 767522-1 767522-1 Slitting Tool Number 767527-1 (Instruction Sheet No. 408-4334) Replacement Components for Tool Number 767527-1 Component Description Slitting Punch (Set of 35) Die Insert* (Set of 7) Quantity Required for Each Increment of 38 Positions (0.64 [.025] Centerline) 5 1 Part Number 767532-1 767530-1 * The die insert is located in the tool with a 3.18 x 28.58 [.125 x 1.125] long dowel and held in place with a 6-32 UNC-2A x 7.94 [5/16] long socket head cap screw (not included with replacement insert). Note: Part Numbers are RoHS compliant. 62 Catalog 889092 Revised 9-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967