19-0065; Rev 6; 10/03 +5V, RS-232 Transceivers with 0.1F External Capacitors Next-Generation Device Features For Low-Cost Applications: MAX221E: 15kV ESD-Protected, +5V, 1A, Single RS-232 Transceiver with AutoShutdownTM For Low-Voltage and Space-Constrained Applications: MAX3222E/MAX3232E/MAX3237E/MAX3241E/ MAX3246E: 15kV ESD-Protected, Down to 10nA, +3.0V to +5.5V, Up to 1Mbps, True RS-232 Transceivers (MAX3246E Available in UCSPTM Package) For Space-Constrained Applications: MAX3228E/MAX3229E: 15kV ESD-Protected, +2.5V to +5.5V, RS-232 Transceivers in UCSP For Low-Voltage or Data Cable Applications: MAX3380E/MAX3381E: +2.35V TO +5.5V, 1A, 2Tx/2Rx RS-232 Transceivers with 15kV ESDProtected I/O and Logic Pins For Low-Power Applications: MAX3224E-MAX3227E/MAX3244E/MAX3245E: 15kV ESD-Protected, 1A, 1Mbps, +3.0V to +5.5V, RS-232 Transceivers with AutoShutdown PlusTM Applications Computers Laptops, Palmtops, Notebooks Ordering Information appears at end of data sheet Battery-Powered Equipment AutoShutdown, AutoShutdown Plus, and UCSP are trademarks of Maxim Integrated Products, Inc. Hand-Held Equipment Selector Guide MAX200 +5 5 No. of RS-232 Receivers 0 MAX201 +5 and +9.0 to +13.2 2 2 0 2 No/No MAX202 +5 2 2 0 4 No/No MAX203 +5 2 2 0 None No/No MAX204 +5 4 0 0 4 No/No Part Number Power-Supply Voltage (V) No. of RS232 Drivers No. of Receivers Active in Shutdown 0 No. of External Capacitors (0.1F) 4 Low-Power Shutdown/ TTL Three-State Yes/No MAX205 +5 5 5 0 None Yes/Yes MAX206 +5 4 3 0 4 Yes/Yes MAX207 +5 5 3 0 4 No/No MAX208 +5 4 4 0 4 No/No MAX209 +5 and +9.0 to +13.2 3 5 0 2 No/Yes MAX211 +5 4 5 0 4 Yes/Yes MAX213 +5 4 5 2 4 Yes/Yes ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 MAX200-MAX211/MAX213 General Description The MAX200-MAX211/MAX213 transceivers are designed for RS-232 and V.28 communication interfaces where 12V supplies are not available. On-board charge pumps convert the +5V input to the 10V needed for RS-232 output levels. The MAX201 and MAX209 operate from +5V and +12V, and contain a +12V to -12V charge-pump voltage converter. The MAX200-MAX211/MAX213 drivers and receivers meet all EIA/TIA-232E and CCITT V.28 specifications at a data rate of 20kbps. The drivers maintain the 5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification. The 5W shutdown mode of the MAX200, MAX205, MAX206, and MAX211 conserves energy in batterypowered systems. The MAX213 has an active-low shutdown and an active-high receiver enable control. Two receivers of the MAX213 are active, allowing ring indicator (RI) to be monitored easily using only 75W power. The MAX211 and MAX213 are available in a 28-pin wide small-outline (SO) package and a 28-pin shrink small-outline (SSOP) package, which occupies only 40% of the area of the SO. The MAX207 is now available in a 24-pin SO package and a 24-pin SSOP. The MAX203 and MAX205 use no external components, and are recommended for applications with limited circuit board space. +5V, RS-232 Transceivers with 0.1F External Capacitors PART MAX200CPP TEMP RANGE PIN-PACKAGE PART TEMP RANGE PIN-PACKAGE 0C to +70C 20 Plastic Dip MAX206EWG -40C to +85C 24 Wide SO 0C to +70C 24 SSOP 20 Wide SO MAX206EAG -40C to +85C MAX200EPP -40C to +85C 20 Plastic Dip MAX207CNG 0C to +70C 24 Narrow Plastic Dip MAX200EWP -40C to +85C 20 Wide SO MAX207CWG 0C to +70C 24 Wide SO MAX201CPD 0C to +70C 14 Plastic Dip MAX207CAG 0C to +70C 24 SSOP MAX201CWE 0C to +70C 16 Wide SO MAX207ENG -40C to +85C 24 Narrow Plastic Dip MAX201C/D 0C to +70C Dice* MAX207EWG -40C to +85C 24 Wide SO MAX201EPD -40C to +85C 14 Plastic Dip MAX207EAG -40C to +85C 24 SSOP MAX201EWE -40C to +85C 16 Wide SO MAX208CNG 0C to +70C 24 Narrow Plastic Dip MAX202CPE 0C to +70C 16 Plastic Dip MAX208CWG 0C to +70C 24 Wide SO MAX202CSE 0C to +70C 16 Narrow SO MAX208CAG 0C to +70C 24 SSOP MAX202CWE 0C to +70C 16 Wide SO MAX208C/D 0C to +70C Dice* MAX202C/D 0C to +70C Dice* MAX208ENG -40C to +85C 24 Narrow Plastic Dip MAX202EPE -40C to +85C 16 Plastic Dip MAX208EWG -40C to +85C 24 Wide SO MAX202ESE -40C to +85C 16 Narrow SO MAX208EAG -40C to +85C 24 SSOP MAX202EWE -40C to +85C 16 Wide SO MAX209CNG 0C to +70C 24 Narrow Plastic Dip MAX203CPP 0C to +70C 20 Plastic Dip MAX209CWG 0C to +70C 24 Wide SO 0C to +70C 0C to +70C Dice* MAX200CWP 20 Wide SO MAX209C/D MAX203EPP -40C to +85C 20 Plastic Dip MAX209ENG -40C to +85C 24 Narrow Plastic Dip MAX203EWP -40C to +85C 20 Wide SO MAX209EWG -40C to +85C 24 Wide SO MAX204CPE 0C to +70C 16 Plastic Dip MAX211CWI 0C to +70C 28 Wide SO MAX204CWE 0C to +70C 16 Wide SO MAX211CAI 0C to +70C 28 SSOP Dice* MAX203CWP MAX204C/D 0C to +70C Dice* MAX211C/D 0C to +70C MAX204EPE -40C to +85C 16 Plastic Dip MAX211EWI -40C to +85C 28 Wide SO MAX204EWE -40C to +85C 16 Wide SO MAX211EAI -40C to +85C 28 SSOP MAX205CPG 0C to +70C 24 Wide Plastic Dip MAX213CWI 0C to +70C 28 Wide SO MAX205EPG -40C to +85C 24 Wide Plastic Dip MAX213CAI 0C to +70C 28 SSOP Dice* MAX206CNG 0C to +70C 24 Narrow Plastic Dip MAX213C/D 0C to +70C MAX206CWG 0C to +70C 24 Wide SO MAX213EWI -40C to +85C 28 Wide SO MAX206CAG 0C to +70C 24 SSOP MAX213EAI -40C to +85C 28 SSOP MAX206ENG -40C to +85C 24 Narrow Plastic Dip *Contact factory for dice specifications. ______________________________________________________________________________________ 19 MAX200-MAX211/MAX213 Ordering Information Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) 2 SSOP.EPS MAX200-MAX211/MAX213 +5V, RS-232 Transceivers with 0.1F External Capacitors 1 INCHES E H MILLIMETERS DIM MIN MAX MIN MAX A 0.068 0.078 1.73 1.99 A1 0.002 0.008 0.05 0.21 B 0.010 0.015 0.25 0.38 C D 0.09 0.20 0.004 0.008 SEE VARIATIONS E 0.205 e 0.212 0.0256 BSC 5.20 MILLIMETERS INCHES D D D D D 5.38 MIN MAX MIN MAX 0.239 0.239 0.278 0.249 0.249 0.289 6.07 6.07 7.07 6.33 6.33 7.33 0.317 0.397 0.328 0.407 8.07 10.07 8.33 10.33 N 14L 16L 20L 24L 28L 0.65 BSC H 0.301 0.311 7.65 7.90 L 0.025 0 0.037 8 0.63 0 0.95 8 N A C B e L A1 D NOTES: 1. D&E DO NOT INCLUDE MOLD FLASH. 2. MOLD FLASH OR PROTRUSIONS NOT TO EXCEED .15 MM (.006"). 3. CONTROLLING DIMENSION: MILLIMETERS. 4. MEETS JEDEC MO150. 5. LEADS TO BE COPLANAR WITHIN 0.10 MM. PROPRIETARY INFORMATION TITLE: PACKAGE OUTLINE, SSOP, 5.3 MM APPROVAL DOCUMENT CONTROL NO. 21-0056 REV. C 1 1 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 20 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2003 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.