SPECIFICATION CONTROL DRAWING
307 Constitution Drive
Menlo Park, CA 94025
Wire and
Harnessing
Products
TITLE : SEALING SLEEVE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.: B-006-09
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D001344 REPLACES: N/A
DRAWN BY:
M. FORONDA DATE:
18-Jan-01 PROD. REV.
C DOC ISSUE:
1 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check with the web for the latest revision.
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified
polyvinylidene fluoride.
2. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color – clear.
APPLICATION
1. This device is used to terminate and seal the end of a cable or to terminate and seal a cable shield.
2. For installation, position the end of the cable half way inside the insert (item 2).
3. Heat with Miniray, IR 500 or IR 550 until insert melts.
For best results, prepare the cable as shown:
