YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductor STD Series APPLICATIONS For switching regulators, power amplifiers, power supplies, and noise/EMI/RFI filters. OUTLINE PRODUCT IDENTIFICATION YAGEO SMD power inductors are best designed for noise/EMI/RFI filters for surface mounting application. These components contain tremendous electrode straight, solder heat resistance and outstanding solderability. These products are specially designed for flow, reflow and wave soldering required for surface mounting application. STD 1109 Material Tolerance Inductance (H) Dimensions (A, B, C) Product Symbol FEATURES High current and inductance capacity. Specially designed for surface mounting equipment, good for high density application. SHAPES AND DIMENSIONS TAPE DIMENSIONS +0 11.6 Dimensions : mm +0 11.6 40.1 20.05 0.40.05 1.750.1 +0 +0 14.0 11.50.1 3 240.2 +0 8.5 40.1 14.250.15 11.660.15 6 2.55 200.1 2.55 Dimensions : mm 8.640.15 34 Note : ELECTRICAL CHARACTERISTICS PAPT NO. L (H) Test Frequency (kHz) RDC () Max. IDC (A) Max. STD1109-100M-B 10 20% 1 0.06 3.50 STD1109-120M-B 12 20% 1 0.07 3.40 STD1109-150M-B 15 20% 1 0.08 3.10 STD1109-180M-B 18 20% 1 0.09 3.00 STD1109-220M-B 22 20% 1 0.10 2.60 STD1109-270M-B 27 20% 1 0.11 2.40 STD1109-330M-B 33 20% 1 0.12 2.30 STD1109-390M-B 39 20% 1 0.14 2.10 STD1109-470M-B 47 20% 1 0.17 1.95 STD1109-560M-B 56 20% 1 0.19 1.85 STD1109-680M-B 68 20% 1 0.22 1.65 STD1109-820M-B 82 20% 1 0.25 1.50 STD1109-101M-B 10020% 1 0.35 1.40 STD1109-121M-B 12020% 1 0.40 1.30 STD1109-151M-B 15020% 1 0.47 1.20 STD1109-181M-B 18020% 1 0.63 1.00 STD1109-221M-B 22020% 1 0.73 0.95 STD1109-271M-B 27020% 1 0.97 0.90 STD1109-331M-B 33020% 1 1.15 0.80 STD1109-391M-B 39020% 1 1.30 0.75 STD1109-471M-B 47020% 1 1.48 0.65 STD1109-561M-B 56020% 1 1.90 0.60 STD1109-681M-B 68020% 1 2.45 0.50 STD1109-821M-B 82020% 1 2.55 0.48 STD1109-102M-B 1000 20% 1 3.00 0.46 STD1109-122M-B 1200 20% 1 3.50 0.35 Test Instruments : HP 4261 RF Impedance for L HP 4261 RF Impedance for IDC Digital Multimeter SC-7401 for RDC 35 Note : TAPE MATERIAL RECOMMENDED PATTERN Carrier Tape : Polystyrene Cover Type : Polysethyiene Dimensions : mm 12~14 5 6 Blank 160mm Min. Blank Part Chip Mounting Part 330mm Min. REEL DIMENSIONS Inductor Solder Land Leader Cover Tape Dimensions : mm TYPICAL ELECTRICAL CHARACTERISTIC STD 1109-820M 1000000 2.40.5 130.5 1.0 751 INDUCTANCE (H) 100000 20.5 10000 1000 100 10 210.8 1 1 3302 10 261 100 1000 10000 FREQUENCY (kHZ) Test Instruments : HP4191A RF Impedance Analyzer PACKAGING QUANTITY TYPE BULK CHIP/REEL STD1109 400