5-1-1 Unicolor lamps 3 Round Narrow Viewing Angle LEDs SEL6015 Series (available as Direct Mount) Red Orange Yellow Green Pure green Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv P d Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.9 2.5 10 45 20 630 10 620 10 35 10 1.9 2.5 10 60 20 587 10 590 10 33 10 2.0 2.5 10 90 20 570 10 571 10 30 10 2.0 2.5 10 81 20 560 10 567 10 20 10 2.0 2.5 10 44 20 555 10 559 10 20 10 Lens Color Transparent red Transparent orange Water clear Transparent green Water clear Directional Characteristics (representative example) Chip Material GaAsP GaAsP GaP GaP GaP (Unit: mm) External Dimensions Dimensional Tolerance: 0.3 3.50.1 0.65max 23.0min (1.7) 50 0 Transparent lens 50 90 100% 1.0min 90 100% 0.450.1 (2.54) 0.80.2 4.00.2 0.40.1 60 Resin burr 0.3max 60 Cathode mark 30 5.5 30 o3.10.1 Resin heap 0.8max 4.4 0 Cathode SEL6215S SEL6915A SEL6715C SEL6415E SEL6515C Emitting Color 3.5 Part Number Product Mass: Approx. 0.13 g LEDs 229 5-1 Visible Light LEDs Absolute Maximum Ratings Visible Light Unicolor Lamp Parameter Unit PD IF IF IFP VR Top Tstg mW mA mA/C mA V C C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 -0.45 25C or higher f=1kHz, tw100 s 70 100 3 5 -30 to +80 -30 to +85 -30 to +100 Visible Light Bicolor Lamp Parameter Unit PD IF IF IFP VR Top Tstg mW mA mA/C mA V C C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 -0.45 100 25C or higher f=1kHz, tw100 s 4 5 -30 to +85 -30 to +100 Visible Light Unicolor Surface Mount LEDs Parameter Unit IF IF IFP VR Top Tstg mA mA/C mA V C C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 -0.27 70*2 30 -0.45 100*1 25C or higher f=1kHz, tw100 s 5 3 -30 to +85 -30 to +100 -30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF IF IFP VR Top Tstg mA mA/C mA V C C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 -0.45 70 4 -30 to +85 -30 to +100 25C or higher f=1kHz, tw100 s Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF IF IFP VR Top Tstg mA mA/C mA V C C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 -0.45 50 70 5 -30 to +80 -30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25C or higher f=1kHz, tw100 s