IMX 15, IMY 15 Series 15 Watt DC-DC Converters Wide input voltage ranges up to 150 V DC 1 or 2 outputs up to 48 V DC 1500...4000 V DC I/O electric strength test LGA * Reinforced isolation for IMY-models * Magnetic feedback * Synchronous rectifier for 2.5, 3.3 and 5 V outputs * Short circuit protection Selection chart Output 1 Output 2 Input voltage Uo nom Io nom Uo nom Io nom Ui [V DC] 3.3 3.3 3.3 5 5 5 5.1 5.1 5.1 12 12 15 15 +5.1 +5.1 +5.1 5 5 5 12 12 12 15 15 15 24 24 24 [mA] 4500 4500 4500 3500 3500 3500 2300 2500 2500 1300 1300 1000 1000 1350 1500 1500 1300 1400 1400 650 700 700 500 560 560 320 350 350 [V DC] +3.3 +3.3 +3.3 5 5 5 12 12 12 15 15 15 24 24 24 [mA] 1350 1500 1500 1300 1400 1400 650 700 700 500 560 560 320 350 350 [V DC] 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 8.4...36 16.8...75 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 www.power-one.com Edition 4/04.2001 Type 20 IMX 15-03-9RG 40 IMX 15-03-9RG 110 IMY 15-03-9RG 20 IMX 15-05-9RG 40 IMX 15-05-9RG 110 IMY 15-05-8RG 20 IMX 15-05-9R 40 IMX 15-05-9R 110 IMY 15-05-8R 20 IMX 15-12-9C 40 IMX 15-12-9C 20 IMX 15-15-9C 40 IMX 15-15-9C 20 IMX 15-0503-9R 40 IMX 15-0503-9R 110 IMY 15-0503-8R 20 IMX 15-05-05-9 40 IMX 15-05-05-9 110 IMY 15-05-05-8 20 IMX 15-12-12-9 40 IMX 15-12-12-9 110 IMY 15-12-12-8 20 IMX 15-15-15-9 40 IMX 15-15-15-9 110 IMY 15-15-15-8 20 IMX 15-24-24-9 40 IMX 15-24-24-9 110 IMY 15-24-24-8 Options (for availability consult sales point) -8, i, L, C, Z -8, i, L, C, Z i, Z -8, i, L, C, Z -8, i, L, C, Z i, Z -8, i, L, C, Z -8, i, L, C, Z i, Z -8 -8 -8 -8 -8, i, L, Z -8, i, L, Z -8, i, L, Z -8, K, i, L, C, Z -8, K, i, L, C, Z i, Z -8, K, i, L, C, Z -8, K, i, L, C, Z i, Z -8, K, i, L, C, Z -8, K, i, L, C, Z i, Z -8, i, L, C, Z -8, i, L, C, Z i, Z 1 Board Mountable IMX 15, IMY 15 Series Input Input voltage range 20 IMX 15 40 IMX 15 110 IMY 15 8.4...36 V DC 16.8...75 V DC 50...150 V DC Output Output voltage setting accuracy Minimum load Line/load regulation Line regulation Load regulation Output voltage switching noise Efficiency Ui nom , 50% lo nom 1% Uo nom recommended for double output models 10% lo nom Ui min...Ui max, 50% lo nom, models R (magn. feedback) 0.5% Uo nom Ui min...Ui max, 50% lo nom, models without R 1% Uo nom Ui nom , 10...100% lo nom, models without R, main outp. 3% Uo nom tracking output, models without R 3% Uo nom Ui nom , 0...100% lo nom, peak-peak, total max. 1...2% Uo nom Ui nom , lo nom up to typ 88% Control and protection Remote shut down Trim input for Uo Input undervoltage lock-out Overload protection No-load protection Temperature protection TTL-compatible input disabled with 0.7 V 80...105% Ui min...Ui max, fully protected, hiccup mode Ui min...Ui max Safety and EMC Electric strength test voltage Type of insulation Electromagnetic interference I/O (20 and 40 IMX/110 IMY) 1500/4000 V DC I/O (20 and 40 IMX supplementary/110 IMY re-inforced) conducted (with external filter) class B radiated class A Environmental Operating ambient temperature Ui nom, lo nom Storage temperature non operational Relative humidity non condensing -40...71C -40...100C 93% Options Extended temperature range Alternative pinout Inhibit input (reverse logic) SMD version C-pinout Open version www.power-one.com Edition 4/04.2001 -40...85C (derating above 71C), ambient, operating connected outputs, for compatibility TTL-compatible, disabled with 2.4 V or open-circuit with PCB lid connected outputs, no options possible excl. -8 no housing, not lacquered -8 K i L C Z 2 IMX 15, IMY 15 Series 15 Watt DC-DC Converters Mechanical data Tolerances 0.3 mm (0.012") unless otherwise indicated. European Projection Standard and option K 45.72 (1.8") 10.5 (0.41") 12 13 1 2 15 3 36.83 (1.45") 11 0.8 (0.03") 5.08 (0.2") 40.65 (1.6") 2.54 (0.1") S09011 4 17 bottom view Fixing hole for M2 or KA 22 self tapping screws 47 (1.85") 50.8 (2") Measuring point of case temperature TC C pinout (option C) 0.5 (0.02") 45.72 (1.8") 11.2 (0.44") 45.72 (1.8") 5.08 (0.2") o 1.0 (0.04") 3 1 4 2 20.3 (0.8") 40.65 (1.6") 1.0 (0.04") S90010 5 bottom view 50.8 (2") Measuring point of case temperature TC www.power-one.com Edition 4/04.2001 3 Board Mountable IMX 15, IMY 15 Series Open frame version (option Z) 10.5 (0.41") 45.72 (1.8") o 2.54 (0.1") S90011 11 13 3 x 5.08 (0.2") 1 2 15 3 38.8 (1.52") 12 6 x 5.08 (0.2") 0.8 (0.03") 4 bottom view 17 48.26 (1.9") SMC version (option L) 11.5 (0.45") 54.6 (2.15") 2.8 (0.11") S90012 11 6 5 13 1 14 2 15 3 6 x 5.08 (0.2") 5 x 5.08 (0.2") 40.65 (1.6") 12 16 4 bottom view 17 50.8 (2") Pin allocation Pin1 Standard and Option Z single double -05031 Vi+ Vi+ Vi+ 2 Vi- Vi- Vi- 3 Trim n.c. 4 SD SD SD 5 6 11 Vo1+ Vo2+ 12 Vo1- Go 13 Vo+ Vo2+ Vo1+ 15 Vo- Vo2- Go 17 R n.c. R 1 Pin 14 and pin 16 are not connected. www.power-one.com Edition 4/04.2001 Option K dual Vi+ Vi- SD Vo+ Go Vo- n.c. Option C single dual Vi+ Vi+ Vi- Vi- Vo+ Vo+ Go Vo- Vo- - Option L single double Vi+ Vi+ Vi- Vi- n.c. Trim SD SD n.c. n.c. n.c. n.c. n.c. Vo1 n.c. Vo1- Vo+ Vo2+ Vo- Vo2 R n.c. 4