SMD LED Product Data Sheet LTST-C930GKT Spec No.: DS22-2000-016 Effective Date: 03/05/2000 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LITE-ON ELECTRONICS,INC. Property of Lite-On Only Features * Package in 8mm tape on 7" diameter reels. * Compatible with automatic placement equipment. * Compatible with infrared and vapor phase reflow solder process. * EIA STD package. * I.C. compatible. Package Dimensions Part no. Lens LTST-C930GKT Water Clear Source Color GaP on GaP Green Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1mm (.004") unless otherwise noted. Part No. : LTST-C930GKT BNS-OD-C131/A4 Page : 1 of 6 LITE-ON ELECTRONICS,INC. Property of Lite-On Only Absolute Maximum Ratings At Ta=25 Parameter LTST-C930GKT Unit Power Dissipation 100 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 120 mA Continuous Forward Current 30 mA Derating Linear From 50 0.6 mA/ Reverse Voltage 5 V Operating Temperature Range -55 to + 85 Storage Temperature Range -55 to + 85 Wave Soldering Condition 260C For 5 Seconds Infrared Soldering Condition 260C For 5 Seconds Vapor Phase Soldering Condition 215C For 3 Minutes Suggest IR Reflow Condition : Part No. : LTST-C930GKT BNS-OD-C131/A4 Page : 2 of 6 LITE-ON ELECTRONICS,INC. Property of Lite-On Only Electrical Optical Characteristics At Ta=25 Parameter Symbol Luminous Intensity Part No. LTST- Min. Typ. Max. Unit Test Condition 10.0 40.0 125.0 mcd IF = 10mA Note 1 IV C930GKT Viewing Angle 21/2 C930GKT 25 deg Note 2 (Fig.6) Peak Emission Wavelength Peak C930GKT 565 nm Measurement @Peak (Fig.1) Dominant Wavelength d C930GKT 569 nm Note 3 Spectral Line Half-Width C930GKT 30 nm Forward Voltage VF C930GKT 2.1 Reverse Current IR C930GKT Capacitance C C930GKT 2.6 V IF = 20mA 100 A VR = 5V PF VF = 0 f = 1MHZ 35 Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Part No. : LTST-C930GKT BNS-OD-C131/A4 Page : 3 of 6 LITE-ON ELECTRONICS,INC. Property of Lite-On Only Typical Electrical / (25 Part No. : LTST-C930GKT BNS-OD-C131/A4 Optical Characteristics Curves Ambient Temperature Unless Otherwise Noted) Page : 4 of 6 LITE-ON ELECTRONICS,INC. Property of Lite-On Only Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature for less one minute. Suggest Soldering Pad Dimensions Package Dimensions Of Tape And Reel Notes: 1. All dimensions are in millimeters (inches). Part No. : LTST-C930GKT BNS-OD-C131/A4 Page : 5 of 6 LITE-ON ELECTRONICS,INC. Property of Lite-On Only Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-1500 pieces per reel. 3. The maximum number of consecutive missing lamps is two. 4. In accordance with ANSI/EIA 481-1-A-1994 specifications. Part No. : LTST-C930GKT BNS-OD-C131/A4 Page : 6 of 6