LITE-ON DCC
RELEASE
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
SMD LED
Product Data Sheet
LTST-C930GKT
Spec No.: DS22-2000-016
Effective Date: 03/05/2000
Revision: -
BNS-OD-FC001/A4
BNS-OD-FC001/A4
BNS-OD-FC001/A4
BNS-OD-FC001/A4
L I T E - O N E L E C T R O N I C S , I N C .
Property of Lite -On Only
Features
* Package in 8mm tape on 7" diameter reels.
* Compatible with automatic placement equipment.
* Compatible with infrared and vapor phase reflow solder process.
* EIA STD package.
* I.C. compatible.
Package Dimensions
Part no.
Lens
Source Color
LTST-C930GKT
Water Clear
GaP on GaP Green
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1mm (.004") unless otherwise noted.
Part No. : LTST-C930GKT
Page : 1 of 6
BNS-OD-C131/A4
L I T E - O N E L E C T R O N I C S , I N C .
Property of Lite -On Only
Absolute Maximum Ratings At Ta=25℃
Parameter
LTST-C930GKT
Unit
Power Dissipation
100
mW
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
120
mA
Continuous Forward Current
30
mA
Derating Linear From 50℃
0.6
mA/℃
Reverse Voltage
5
V
Operating Temperature Range
-55℃ to + 85℃
Storage Temperature Range
-55℃ to + 85℃
Wave Soldering Condition
260°C For 5 Seconds
Infrared Soldering Condition
260°C For 5 Seconds
Vapor Phase Soldering Condition
215°C For 3 Minutes
Suggest IR Reflow Condition :
Part No. : LTST-C930GKT
Page : 2 of 6
BNS-OD-C131/A4
L I T E - O N E L E C T R O N I C S , I N C .
Property of Lite -On Only
Electrical Optical Characteristics At Ta=25℃
Parameter
Symbol
Part No.
LTST-
Min.
Typ.
Max.
Unit
Test Condition
Luminous Intensity
IV
C930GKT
10.0
40.0
125.0
mcd
IF = 10mA
Note 1
Viewing Angle
2θ1/2
C930GKT
25
deg
Note 2 (Fig.6)
Peak Emission Wavelength
λPeak
C930GKT
565
nm
Measurement
@Peak (Fig.1)
Dominant Wavelength
λd
C930GKT
569
nm
Note 3
Spectral Line Half-Width
Δλ
C930GKT
30
nm
Forward Voltage
VF
C930GKT
2.1
2.6
V
IF = 20mA
Reverse Current
IR
C930GKT
100
μA
VR = 5V
Capacitance
C
C930GKT
35
PF
VF = 0
f = 1MHZ
Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
Part No. : LTST-C930GKT
Page : 3 of 6
BNS-OD-C131/A4
L I T E - O N E L E C T R O N I C S , I N C .
Property of Lite -On Only
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Part No. : LTST-C930GKT
Page : 4 of 6
BNS-OD-C131/A4
L I T E - O N E L E C T R O N I C S , I N C .
Property of Lite -On Only
Cleaning
Do not use unspecified chemical liquid to clean LED they could harm the package.
If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature
for less one minute.
Suggest Soldering Pad Dimensions
Package Dimensions Of Tape And Reel
Notes:
1. All dimensions are in millimeters (inches).
Part No. : LTST-C930GKT
Page : 5 of 6
BNS-OD-C131/A4
L I T E - O N E L E C T R O N I C S , I N C .
Property of Lite -On Only
Notes:
1. Empty component pockets sealed with top cover tape.
2. 7 inch reel-1500 pieces per reel.
3. The maximum number of consecutive missing lamps is two.
4. In accordance with ANSI/EIA 481-1-A-1994 specifications.
Part No. : LTST-C930GKT
Page : 6 of 6
BNS-OD-C131/A4
