AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Circular Plastic Connector Sealing Accessories A Sealing Caps for Receptacles only B .015 [0.38] Sealing caps are used to protect exposed contacts of unmated receptacles. 3.000.030 [76.20.76] .143 Dia. [3.63] Material and Finish Plastic Strap Cap--Thermoplastic, heat stabilized, fire resistant, self-extinguishing, 94V-1 rated, black Sealing Gasket--Neoprene, black Bead Chain--Steel, nickel plated Bead Chain Coupling--Brass, plated nickel Shell Size Series 11 1&2 13 1 17 1,2,& 3 23 1, 3, & 4 2 Dimensions A B .360 .927 9.14 23.55 .360 1.055 9.14 26.80 .360 1.295 9.14 32.89 .460 1.728 11.68 43.89 Plastic Strap Part No. Metal Bead Chain Part No. 206903-1 208800-1 211870-1 213485-1 207445-1 208652-1 207446-1 207446-2 208680-1 208680-2 A Min. Cable Entry Seals Heat Shrinkable Sealing Boots Jacketed Cable Cable entry seals are used with jacketed cable to provide an environmentally sealed wire-toconnector system. They can be used with either plugs or receptacles. CPC Sealing Accessories Thick Wall Boots B Dia. Min. A 11 2.500 63.50 Material Internal Sleeve--Nylon Outer Tubing--Polyolefin, black 13 17 23 B Expanded Wall Thickness Sealing Range (Dia.) .625 15.88 .050 Ref. 1.27 Ref. .250 - .600 6.35 - 15.24 .775 19.68 Ref. .060 Ref. 1.52 .250 - .375 6.35 - 9.53 .375 - .725 9.53- 18.42 .975 24.76 .060 Ref. Ref. 1.52 .400 - .875 10.16 - 22.22 Max. Recovered Inside Diameter .160 4.06 .250 6.35 .220 5.59 .300 7.62 ef. .375 9.52 . 1.250 31.75 .070 Ref. 1.78 Ref. .550 - 1.250 13.97 - 31.75 .500 12.70 Dimensions Shell Size 2.500 63.50 2.500 63.50 3.000 76.20 3.000 76.20 15/16-20 UNEF 38 THD Part No. 54010-4 54010-1 54123-2 54123-1 54011-1 54011-3 54012-1 Threaded Sleeve Thin Wall Boot Tubing with Sealant 1.027 [26.09] Dia. Material Inter Sleeve--Nylon Outer Tubing--Polyolefin Expanded Wall Thickness-- .020 [0.51] Max. Recovered Wall Thickness-- .040 [10.16] Sealing Range--.250 [6.35].500 [12.70] Dia. .625.015 [15.880.38] Dia. .875.010 [22.220.25] 2.000.025 [50.800.64] Shell Size 17 Part No. 213933-1 52 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Note: All part numbers are RoHS Compliant. AMP Circular Connectors for Commercial Signal and Power Applications Circular Plastic Connector Sealing Accesories (Continued) Jacketed Cable Seals (for Shell Size 23) 3.500.030 [88.90.76] A jacketed cable seal kit provides an environmentally sealed connection for jacketed cable. +.000 1.095 [27.81] Dia. 1.290-0.15 [32.77-0.38] Dia. Material Peripheral Seal--Grey elastomer Collar--Aluminum Jacketed Cable Seal--Black rubber Back-Shell Extender--Black glass-filled thermoplastic Special Clamp Saddle--Black thermoplastic Note: Jacketed cable seals must be used with large cable clamps and can be used on plugs or receptacles. Large cable clamps are to be ordered separately (see page 38). Each jacketed cable seal kit includes: * Peripheral Seal--to be discarded if kit is used on plug. Additional seals may be purchased (see page 51) * Collar--provides bearing surface for back-shell extender * Jacketed Cable Seal * Back-Shell Extender * Special Clamp Saddle--to be used in lieu of clamping insert supplied with large cable clamp See Sealing Range (Dia.) Female Special Clamp Saddle Plug (See Note) Jacketed Cable Seal* Collar Back-Shell Extender Large Cable Clamp Part No. 206512-5 (See Note) Sealing Range (Dia.) .300-.450 7.62-11.43 .450-.600 11.43-15.24 .600-.875 15.24-22.22 *Jacketed cable seal is pressed flush against rear connector face when back-shell extender is threaded onto rear of connector. Rubber Boot Kit Number 207052-1 207052-2 207052-3 1.800.020 [45.720.51] Rubber boots are used with jacketed cable to provide splashproof connections for Series 1 and Series 3 connectors. (Not for Metal Shell Connectors.) B .010 [0.25] CPC Sealing Accessories A .010 [0.25] C D Material Black neoprene Plug (See Note 1) Rubber Boot Jacketed Cable Shell Size 11 Cable Dia. Sealing Range .219-.438 5.56-11.13 A .750 19.05 Dimensions B C .300 .600 7.62 15.24 D .170 4.32 Part No. 206304-1 Notes: 1. Rubber boots are recommended for use with jacketed cable and can be used on plugs or receptacles, except Series 2 connectors. Notes: 2. For detailed performance data on rubber boots, refer to Product Specification No. 108-10024. 53 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Circular Plastic Connector Sealing Accesories (Continued) Flexible Cable Protection System Product Facts For cables that require better protection Fittings allow more reliable connections to be made Sealed fittings enhance reliability of machinery operating under many extreme environmental conditions encountered in manufacturing and construction industries Related Product Data Catalog 1654227 Identification Products High-quality, complete systems are available combining innovative technology with rapid in-stock availability Technical Documents Conforms with the latest industry standards Recognized under the Component Program of Underwriters Laboratories Inc. on applied products as marked. Application Specifications 114-18274 FLEXAgraff-AS, -PU-AS, -ME-ASF Metal Conduits 114-18275 FLEXAgraff-CU Metal Conduits 114-18276 AIRflex-KUW-PU Plastic Conduits 114-18277 ROHRflex-PA 6, ROHRflex-PA 6 S, ROHRflexPA 12 Plastic Tubing R Certified by Canadian Standards Association on applied products as marked. Product Specifications 108-1696 FLEXAgraff Metal Conduits 108-1696-1 ROHRflex Plastic Tubing 108-1696-2 AIRflex Plastic Conduits R CPC Sealing Accessories Certified by VDE on applied products as marked. Typical Industrial Application Circular Plastic Connectors (CPC) / FLEXAquick-System Selection Aid CPC Shell Size 11 13 17 23 Female ROHRflex quick Connector 1-969807-2 1-969809-3 1-969811-4 2-969813-5 ROHRflex-PA 6 Plastic Tubing 969789-2 969789-3 969789-4 969789-5 Male ROHRflex quick Connector 969803-2 969803-3 969803-4 969803-5 Male ROHRflex quick Elbow Connector 969817-2 969817-3 969817-4 969817-5 Counternut 796260-2 796260-3 796260-5 796260-6 Flat Sealing Washer 796257-2 796257-7 796257-8 796257-9 NOTE: Request Flexible Cable Protection System Catalog 1307244. 54 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Engineering Notes 55 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. MIL-C-5015 Style Circular Plastic Connectors (CPC) Product Facts n Intermateable with other manufacturers' Metal-Shell Sizes 20-14 and 18-10, MIL-C-5015 Style Connectors n High impact resistant plastic housing n Lighter weight n Lower cost n Industry accepted, Type III+ pin and socket contacts, available on reels in stripform for high volume, low cost, automatic machine terminations n Contacts also available in loose piece form for low volume, prototype or maintenance and repair n Housing designed to prevent mismating with other insert arrangements n Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 n Certified by Canadian Standards Association, File No. LR 7189 R MIL-C-5015 Style Circular Plastic Connectors R This new addition to the AMP Circular Plastic Connector Line is specifically designed to be intermateable with other manufacturers' Metal-Shell sizes 20-14 and 18-10, MIL-C-5015 Style Connector Systems. The high impact resistant plastic housing offers the advantages of lighter weight and lower cost than existing metal shell connectors. In addition, the connector design prevents mismating when used with other insert arrangements. As part of the AMP Multimate Family of Connectors, the MIL-C-5015 style connector offers the additional economies of crimp Type III+ Pin and Socket contacts in reelmounted, strip-form for high volume automatic machine termination, as well as in loose piece form for low volume, prototype or maintenance and repair. Technical Documents Application Specification 114-10004 Contacts, Type III+ Product Specifications 108-10024 CPC Connectors 108-10042 Contacts, Type III+ Instruction Sheets 408-7582 Accessories for CPC Connectors 408-7592-A Improved Strain Relief Clamps for CPC Connectors 408-7593 CPC Connectors 56 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. MIL-C-5015 Style Circular Plastic Connectors (CPC), Shell Size 20-14 Plug Kit, Unassembled 5-20 Self Tapping Screw, Quantity 2 Reverse Sex (Accepts pins) Part Number 213571-2 without Cable Clamp .625 [15.88] Standard Sex (Accepts sockets) Part Number 213652-1 without Cable Clamp 2.839.040 [72.111.02] Clamping Inserts .703 [17.86] Max. Outside Dia. Assembled with Cable Clamp Cable Clamps Part No. Type 206070-8 standard 206322-9 large O.D. Max. .453 [11.51] .703 [17.86] 1.180 [29.97] Dia. 15/16-20 UNEF 1.045.003 [26.540.08] Dia. Coupling Ring 1.635 [41.53] Max. 1.565 [39.75] Max. Dia. 1.470 [37.34] Max. Dia. 1.131.025 [28.73] Dia. Standard Sex 1.180 [29.97] Dia. 15/16-20 UNEF 1.665.030 [42.040.76] .161 [4.09] 1.174.010 [29.820.25] 1.045.003 [26.540.08] Dia. 1.635 [41.53] Max. Receptacle, Square Flange Reverse Sex Reverse Sex (Accepts sockets) Part Number 213570-1 Standard Sex (Accepts pins) Part Number 213651-1 1.500.025 [38.100.64] 1.156.010 [29.36.025] Typ. 1.500.025 [38.100.64] 1.210 Max. [30.73] 1.165.010 [29.590.25] Dia. 1.156.010 [29.36.025] Typ. .125+.007 - 0.00 +.018 - 0.00 .578 [14.68] 1 1/4-18 UNEF Mating Face Reverse Sex 1.500.025 [38.100.64] 1.156.010 1.500.025 [38.100.64] 1.560 Max. [39.62] [29.36.025] Typ. 1.156.010 [29.36.025] Typ. 1.156.010 [29.360.25] Typ. 1.410/1.350 [35.81/34.29] Dia. 1.156.010 [29.360.25] Typ. 1.165.010 [29.590.25] Dia. Mating Face .578 [14.68] Panel Cutout 1 1/4-18 UNEF Mating Face Receptacle, Free-Hanging 4 Plc. 1.210 Max. [30.73] Standard Sex 1.165 [29.59] Dia. Reverse Sex (Accepts sockets) Part Number 213650-1 15/16-20 UNEF 1 1/4-18 UNEF 57 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MIL-C-5015 Style Circular Plastic Connectors [3.18 ] AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. MIL-C-5015 Style Circular Plastic Connectors (CPC), Shell Size 18-10 Plug Kit, Unassembled 1.174.010 [29.820.25] 1.620.010 [41.150.38] .560 [14.22] Reverse Sex (Accepts pins) Part Number 213671-1 without Cable Clamp 1.435.010 [36.450.25] Dia. .925.003 [23.500.08] Dia. 15/16-20 UNEF Receptacle, Square Flange Reverse Sex (Accepts sockets) Part Number 213667-1 1 1/18-18 UNEF Coupling Ring 1.375.015 [34.920.38] .125+.007 - 0.00 1.062.010 1.375.015 [34.920.38] 1.450.010 [36.830.25] [26.970.25] Typ. 1.285/1.320 [32.64/33.53] Dia. 1.062.010 [26.970.25] Typ. .531 [13.49] Panel Cutout 1.200.010 [30.480.25] Reverse Sex (Accepts sockets) Part Number 213668-1 4 Plc. 1.062.010 [26.970.25] Typ. 1 1/18-18 UNEF-2A Receptacle, Free-Hanging +.018 - 0.00 .531 [13.49] .990.010 [25.150.25] Dia. 1.062.010 [26.970.25] Typ. [3.18 ] 1.115.004 [28.320.10] Dia. 1 1/18-18 UNEF-2A 15/16-20 UNEF-2A Type III+ Contacts Material Contact--Brass Spring--Stainless Steel MIL-C-5015 Style Circular Plastic Connectors Contact Finish .535 [13.59] A--.000030 [0.00076] gold on the electrical engagement area over .000030 [0.00076] min. nickel B--Tin Socket Pin*** Related Product Data Application Tooling--Pages 76-79 Wire Size Range AWG mm2 Ins. Dia. Range Contact Finish Code 24-20 0.2-0.6 .060-.135 1.52-3.43 B A 18-14 0.8-2 .110-.150 2.79-3.81 B A Strip Form Contact No. Loose Piece Contact No. Pin Socket Pin Socket 213605-7 1-66563-1 -- 66565-7 -- 66563-8 -- 66565-4 213603-5 213603-3 66598-9 66598-2 213603-6 213603-4 66601-9 66601-2 Strip Form Applicator Hand Tool Part No. 567363- 91542-15 466958-1 (for Sockets) or 567364- 91521-15 or 567834-1 (for Sockets) Note: Applicators for AMP semiautomatic or fully-automatic termination equipment are available. Contact Technical Support. ***MIL-C-5015 style connectors require a longer Multimate pin contact. This contact is .145 [3.68] longer than the standard Multimate pin contacts. It is not for use in other Multimate connectors, socket contacts are standard Multimate Type III+ contacts. Extraction Tool Part No. 305183 Note: Gold-plated contacts should not be mated with tin or silver plated contacts. 5 To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No 217201-1, Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated). 58 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Engineering Notes 59 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell Circular Plastic Connectors Product Facts Economical combination of thermoplastic UL 94V-0 rated connector housings and metal shells Available in three sizes: Series 1-Accepts Multimate contacts, shell sizes 14-5, 14-7, 22-16, 28-24, and 28-37 standard sex; 14-5, 14-7, 22-14, and 28-37 reverse sex Series 2-Accepts 20 DF and 20 DM contacts, shell sizes 22-28 and 28-63 standard sex; 22-28 and 28-57 reverse sex Series 3-Accepts Type XII power contacts, shell sizes 22-3 and 28-7 standard and reverse sex Series 4-Accepts Multimate contacts, and Type XII power contacts, shell size 28-16M and 28-22M standard sex Compatible with MIL Spec metal housing type connectors Choice of application tooling to meet all production requirements AMP Metal-Shell Circular Plastic Connectors offer the reliability of higher priced all metal connectors at a fraction of the cost, and are offered in the more popular contact configurations. Metal-Shell Circular Plastic Connectors Connector housings are made of lightweight, sturdy, thermoplastic material that are UL 94V-0 rated, with zinc alloy, nickel plated shells for added strength and protection. These connectors are available in a variety of configurations to meet your signal, low current and high current requirements. Operating temperatures range from -55C to +125C [-67F to +257F]. Signal and low current is provided by a choice of AMP Multimate contacts: .062 [1.57] pin diameter and 20 DF and 20 DM contacts, .040 [1.02] pin diameter. High current requirements are met by the Type XII capable of carrying up to 35 amperes of current. These quick connect/ disconnect circular connectors feature polarized housings to prevent mismating with other insert arrangements. For additional economy, industry accepted AMP Type III+ pin and socket contacts are available on reels in strip-form for high volume, low cost, automatic machine terminations. For low volume, prototype or maintenance and repair Type III+ contacts are also available in loose piece form. AMP Metal-Shell Circular Plastic Connectors are available in square flange receptacles and freehanging plug connectors. 60 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Note: All part numbers are RoHS Compliant. AMP Circular Connectors for Commercial Signal and Power Applications Metal-Shell Circular Plastic Connectors, Series 1 Metal-Shell CPC Connectors, Series 1, Standard Sex Square Flange Receptacles (Accepts Multimate Pins) F Mating Face E D Listed part numbers are for connectors only; contacts must be ordered separately. .975.010 [24.770.03] 2 Plc. Plugs (Accepts Multimate Sockets) Material and Finish Related Product Data L M K Arrangement Square Flange Receptacle 14-5 14-7 22-16 28-24 28-37 208719-1 208715-1 208489-1 208459-1 208471-1 Plug Part No. without TETRASEALS Ring with TETRASEALS Ring 208718-1 208718-2 208714-1 208714-2 208488-1 208488-3 208457-1 208457-3 208470-1 208470-3 Note: Maximum wire insulation diameter is .100 [2.54], except arrangements 14-5 and 28-24 are .150 [3.81] max. J Dia. G Dia. Metal-Shell CPC Series 1 Contacts--Pages 17-21 Contact Arrangement--Page 61 Component Dimensions--Page 70 Accessories--Page 71 Performance Characteristics-- Page 6 Application Tooling--Pages 76-79 Technical Documents--Page 80 A Mating Face Square Flange Receptacle-- Housing--Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Grooved Pin--Steel alloy, plated nickel Plug-- Housing--Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Tetraseal Seal--Fluorocarbon Retainer Ring--Stainless steel Coupling Ring--Zinc alloy, plated nickel B E E H Dia. J Dia. TETRASEALS Ring (Installed in plugs only.) Rear Mount Panel Cutout The TETRASEALS Ring provides splashproof sealing between mating metal shells. It is located behind the plug shell external keys (under the coupling ring). When mated with a receptacle, the ring is compressed against the inside diameter of the mating end edge of the receptacle shell. Front Mount Panel Cutout TETRASEALS Ring 61 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell Circular Plastic Connectors, Series 1 (Continued) Metal-Shell CPC Connectors, Series 1, Reverse Sex Square Flange Receptacles (Accepts Multimate Sockets) F Mating Face E D B Listed part numbers are for connectors only; contacts must be ordered separately. A Plugs (Accepts Multimate Pins) Mating Face Material and Finish Square Flange Receptacle-- Housing--Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Grooved Pin--Steel alloy, plated nickel L M Plug-- Housing--Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Tetraseal Seal--Fluorocarbon Retainer Ring--Retainer Ring Coupling Ring--Zinc alloy, plated nickel K Arrangement Square Flange Receptacle 14-5 14-7 22-14 28-37 208721-1 208717-1 208487-1 208473-1 Note: Maximum wire insulation diameter is .100 [2.54], except arrangements 14-5 and 28-24 are .150 [3.81] max. Related Product Data Contacts--Pages 17-21 Contact Arrangement--Page 61 Component Dimensions--Page 70 Accessories--Page 71 Performance Characteristics-- Page 6 Application Tooling--Pages 76-79 Technical Documents--Page 80 Metal-Shell CPC Series 1 Plug Part No. without TETRASEALS Ring with TETRASEALS Ring 208720-1 -- 208716-1 208716-2 208486-1 208486-3 208472-1 208472-3 J Dia. J Dia. E E H Dia. Rear Mount Panel Cutout G Dia. Front Mount Panel Cutout TETRASEALS Ring (Installed in plugs only.) The TETRASEALS Ring provides splashproof sealing between mating metal shells. It is located behind the plug shell external keys (under the coupling ring). When mated with a receptacle, the ring is compressed against the inside diameter of the mating end edge of the receptacle shell. TETRASEALS Ring 62 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Note: All part numbers are RoHS Compliant. AMP Circular Connectors for Commercial Signal and Power Applications Metal-Shell CPC Connectors, Series 1, Contact Arrangements Shell Size 14 .170 .170 [4.32] .000 [4.32] .094 .094 [2.39] [2.39] .172 .172 [4.37] .000 [4.37] .086 .086 [2.18] [2.18] .130 [3.3] .126 [3.2] .047 [1.19] .000 .000 .126 [3.2] .130 [3.3] Arrangement 14-5 Max. Wire Ins. Dia. = .150 [3.81] Arrangement 14-7 Max. Wire Ins. Dia. = .100 [2.54] Shell Size 22 .000 .193 .043 .032 .182 [4.9] [1.09] [0.81] [4.62] .150 .150 [3.81] .000 [3.81] .225 .075 .075 [5.72] [1.90] [1.90] .225 [5.72] .268 [6.81] .118 [3] .107 .257 [2.72] [6.53] .260 [6.6] .205 [5.21] .130 [3.3] .075 [1.91] .000 .000 .075 [1.91] .130 [3.3] .205 [5.21] .260 [6.6] .150 [3.81] Note: Contact arrangements shown are of pin mating face (plug or receptacle). Socket mating face is mirror image. Arrangement 22-14 Max. Wire Ins. Dia. = .100 [2.54] Shell Size 28 .150 [3.81] Arrangement 22-16 Max. Wire Ins. Dia. = .100 [2.54] .375 .225 .075 .075 .225 .375 [9.52] [5.72] [1.90] [1.90] [5.72] [9.52] .364 [9.25] .455 [11.56] .182 [4.62] .273 [6.93] .000 .091 [2.31] .182 [4.62] .091 [2.31] .364 [9.25] .273 [6.93] .455 [11.56] .450 [11.43] .300 .150 [7.62] [3.81] .000 .150 .300 .450 [3.81] [7.62] [11.43] .316 [8.03] .260 [6.6] .158 [4.01] .130 [3.3] .000 .000 .130 [3.3] .158 [4.01] .260 [6.6] .316 [8.03] .390 [9.91] .150 [3.81] Arrangement 28-24 Max. Wire Ins. Dia. = .150 [3.81] Arrangement 28-37 Max. Wire Ins. Dia. = .100 [2.54] 63 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Metal-Shell CPC Series 1 .390 [9.91] AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell Circular Plastic Connectors, Series 2 Metal-Shell CPC Connectors, Series 2, Standard Sex Square Flange Receptacles (Accepts 20 DF and 20 DM Pins) F A E B D Listed part numbers are for connectors only; contacts must be ordered separately. Material and Finish Square Flange Receptacle-- Housing and Retention Insert-- Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Grooved Pin--Steel alloy, plated nickel Plugs (Accepts 20 DF and 20 DM Sockets) Mating Face Plug-- Housing--Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Tetraseal Seal--Fluorocarbon Retainer Ring--Stainless steel Coupling Ring--Zinc alloy, plated nickel L M K Related Product Data Metal-Shell CPC Series 2 Contacts--Pages 29-30 Contact Arrangement--Page 64 Component Dimensions--Page 70 Accessories--Pages 38, 39 and 71 Performance Characteristics-- Page 6 Application Tooling--Pages 76-79 Technical Documents--Page 80 Part No. Arrangement Square Flange Receptacle Plug without Tetraseals Ring 22-28 28-63 208491-1 208477-1 208490-1 208476-1 J Dia. G Dia. E Recommended Panel Cutout 64 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell Circular Plastic Connectors, Series 2 (Continued) Metal-Shell CPC Connectors, Series 2, Reverse Sex Square Flange Receptacles (Accepts 20 DF and 20 DM Sockets) A Mating Face E F D Listed part numbers are for connectors only; contacts must be ordered separately. Material and Finish Square Flange Receptacle-- Housing and Retention Insert-- Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Grooved Pin--Steel alloy, plated nickel B Plugs (Accepts 20 DF and 20 DM Pins) Mating Face Plug-- Housing--Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Tetraseal Seal--Fluorocarbon Retainer Ring--Stainless steel Coupling Ring--Zinc alloy, plated nickel L M K Related Product Data Contacts--Pages 29-30 Contact Arrangement--Page 64 Component Dimensions--Page 70 Accessories--Pages 38, 39 and 71 Performance Characteristics-- Page 6 Application Tooling--Pages 76-79 Technical Documents--Page 80 Part No. Arrangement Plug without Tetraseals Ring 208493-1 208475-1 208492-1 208474-1 J Dia. Metal-Shell CPC Series 2 22-28 28-57 Square Flange Receptacle G Dia. E E J Dia. G Dia. Rear Mount Panel Cutout Front Mount Panel Cutout 65 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell CPC Connectors, Series 2, Contact Arrangements Shell Size 22 .248 .124 .000 .124 .248 [6.3] [3.15] [3.15] [6.3] .310 .186 .062 .062 .186 .310 [7.87] [4.72] [1.57] [1.57] [4.72] [7.87] .294 [7.47] .170 [4.32] .062 [1.57] .000 .062 [1.57] .170 [4.32] .124 [3.15] .294 [7.47] Arrangement 22-28 Max. Wire Ins. Dia. = .068 [1.73] Shell Size 28 .434 .310 .186 .062 .062 .186 .310 .434 [11.02] [7.87] [4.72] [1.57] [1.57] [4.72] [7.87] [11.02] .496 .372 .248 .124 .124 .248 .372 .496 [12.6] [9.45] [6.3] [3.15] .000 [3.15] [6.3] [9.45] [12.6] .372 .248 .124 .124 .248 .372 [9.45] [6.3] [3.15] .000 [3.15] [6.3] [9.45] .434 .310 .186 .062 .062 .186 .310 .434 [11.02] [7.87] [4.72] [1.57] [1.57] [4.72] [7.87] [11.02] .448 [11.38] .340 [8.64] .443 [11.25] .232 [5.89] .319 [8.1] .108 [2.74] .212 [5.38] .000 Metal-Shell CPC Series 2 .105 [2.67] .000 .019 [0.48] .108 [2.74] .143 [3.63] .232 [5.89] .250 [6.35] .340 [8.64] .357 [9.07] .448 [11.38] .464 [11.79] .124 [3.15] .124 [3.15] Arrangement 28-57 Max. Wire Ins. Dia. = .068 [1.73] Arrangement 28-63 Max. Wire Ins. Dia. = .068 [1.73] Note: Contact arrangements shown are of pin mating face (plug or receptacle). Socket mating face is mirror image. 66 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Note: All part numbers are RoHS Compliant. AMP Circular Connectors for Commercial Signal and Power Applications Metal-Shell Circular Plastic Connectors, Series 3 Square Flange Receptacles (Accepts Type XII Male Pins) Metal-Shell CPC Connectors, Series 3, Standard Sex F A E B D Listed part numbers are for connectors only; contacts must be ordered separately. Plugs (Accepts Type XII Female Sockets) Material and Finish Square Flange Receptacle-- Housing--Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Peripheral Seal--Elastomer, grey Grooved Pin--Stainless steel Plug-- Housing--Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Tetraseal Seal--Fluorocarbon Retainer Rings--Stainless Steel Coupling Ring--Zinc alloy, plated nickel Related Product Data Mating Face L M K Arrangement Square Flange Receptacle 22-3 28-7 208495-1 208483-1 J Dia. G Dia. E Metal-Shell CPC Series 3 Contacts--Page 34-35 Contact Arrangement--Page 67 Component Dimensions--Page 70 Accessories--Pages 38, 39 and 71 Performance Characteristics-- Page 6 Application Tooling--Pages 76-79 Technical Documents--Page 80 Plug Part No. without TETRASEALS Ring with TETRASEALS Ring 208494-1 208494-3 208482-1 -- Recommended Panel Cutout TETRASEALS Ring TETRASEALS Ring (Installed in Plugs only) The TETRASEALS Ring provides splashproof sealing between connector metalshells. It is located behind the plug-shell external keys (under the coupling ring). When mated with a receptacle, the ring is compressed against the inside diameter of the mating end edge of the receptacle shell. 67 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell Circular Plastic Connectors, Series 3 (Continued) Metal-Shell CPC Connectors, Series 3, Reverse Sex Square Flange Receptacles (Accepts Type XII Female Sockets) F A E B D Listed part numbers are for connectors only; contacts must be ordered separately. Plugs (Accepts Type XII Male Pins) Material and Finish Square Flange Receptacle-- Housing--Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Peripheral Seal--Elastomer, grey Grooved Pin--Stainless steel Mating Face L Plug-- Housing--Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Tetraseal Seal--Fluorocarbon Retainer Rings--Stainless Steel Coupling Ring--Zinc alloy, plated nickel Related Product Data Metal-Shell CPC Series 3 Contacts--Page 34-35 Contact Arrangement--Page 67 Component Dimensions--Page 70 Accessories--Pages 38, 39 and 71 Performance Characteristics-- Page 6 Application Tooling--Pages 76-79 Technical Documents--Page 80 M K Arrangement Square Flange Receptacle 22-3 28-7 208497-1 208485-1 Plug Part No. without TETRASEALS Ring with TETRASEALS Ring 208496-1 -- 208484-1 208484-3 J Dia. G Dia. E Recommended Panel Cutout TETRASEALS Ring TETRASEALS Ring (Installed in Plugs only) The TETRASEALS Ring provides splashproof sealing between connector metalshells. It is located behind the plug-shell external keys (under the coupling ring). When mated with a receptacle, the ring is compressed against the inside diameter of the mating end edge of the receptacle shell. 68 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell CPC Connectors, Series 3, Contact Arrangements Shell Size 22 .148 [3.76] .000 .148 [3.76] .107 [2.72] .000 .213 [5.41] Arrangement 22-3 Max. Wire Ins. Dia. = .220 [5.59] Shell Size 28 .343 [8.71] .172 .000 [4.37] .172 .343 [4.37] [8.71] .296 [7.52] .000 Metal-Shell CPC Series 3 .296 [7.52] Arrangement 28-7 Max. Wire Ins. Dia. = .220 [5.59] Note: Contact arrangements shown are of pin mating face (plug or receptacle). Socket mating face is mirror image. 69 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell Circular Plastic Connectors, Series 4 Metal-Shell CPC Connectors, Series 4 Square Flange Receptacles (Standard Sex Receptacles accept Type XII Male and Multimate Pins. Reverse Sex Receptacles accept Type XII Female and Multimate Sockets.) F A E B D Listed part numbers are for connectors only; contacts must be ordered separately. Material and Finish Plugs (Standard Sex Plugs accept Type XII Female and Multimate Sockets. Reverse Sex Plugs accept Type XII Male and Multimate Pins.) Mating Face Square Flange Receptacle-- Housing--Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Grooved Pin--Stainless steel Plug-- Housing--Thermoplastic, UL 94V-0 rated, black Metal-Shell--Zinc alloy, plated nickel Tetraseal Seal--Fluorocarbon Retainer Rings--Stainless Steel Coupling Ring--Zinc alloy, plated nickel Related Product Data L M K Arrangement Metal-Shell CPC Series 4 Contacts--Pages 17-23 and 34-35 Contact Arrangement--Page 69 Component Dimensions--Page 70 Accessories--Pages 38, 39 and 71 Performance Characteristics-- Page 6 Application Tooling--Pages 76-79 Technical Documents--Page 80 28-16M 28-22M G Dia. Square Flange Receptacle Standard Sex Reverse Sex 208479-1 1776088-1 208481-1 -- Plug Part No. without TETRASEALS Ring with TETRASEALS Ring Standard Sex Reverse Sex Standard Sex 208478-1 1776089-1 208478-3 208480-1 -- 208480-3 J Dia. G Dia. E E J Dia. Rear Mount Panel Cutout Front Mount Panel Cutout TETRASEALS Ring TETRASEALS Ring (Installed in Plugs only) The TETRASEALS Ring provides splashproof sealing between connector metalshells. It is located behind the plug-shell external keys (under the coupling ring). When mated with a receptacle, the ring is compressed against the inside diameter of the mating end edge of the receptacle shell. 70 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell CPC Connectors, Series 4, Contact Arrangements Shell Size 28 .276 .092 .092 .276 [7.01][2.34][2.34][7.01] .400 .184 .184 .400 [10.16][4.67].000 [4.67] [10.16] .400 [10.16] .316 [8.03] .158 [4.01] .000 .158 [4.01] .316 [8.03] .400 [10.16] Arrangement 28-16M Max. Wire Ins. Dia. = .150 [3.81] for Multimate Contacts, .220 [5.59] for Power Contacts .364 .182 .182 .364 [9.25][4.62].000 [4.62][9.25] .455 .273 .091 .091 .273 .455 [11.56][6.93][2.31][2.31][6.93][11.56] .382 [9.7] .316 [8.03] .158 [4.01] .000 .158 [4.01] .316 [8.03] Metal-Shell CPC Series 4 .382 [9.7] Arrangement 28-22M Max. Wire Ins. Dia. = .150 [3.81] for Multimate Contacts, .220 [5.59] for Power Contacts Note: Contact arrangements shown are of pin mating face (plug or receptacle). Socket mating face is mirror image. 71 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Note: All part numbers are RoHS Compliant. AMP Circular Connectors for Commercial Signal and Power Applications Metal-Shell CPC Connectors Component Dimensions Square Flange Receptacles Thread-Size: 7/8-20 UNEF-2A (Shell Size 14) 15/16-20 UNEF-2A (Shell Size 22) 1-3/8-18 UNEF-2A (Shell Size 28) F .015 [0.38] E .005 [0.13] J .005 [0.13] Dia. E .005 [0.13] G .010 [0.25] Dia. Panel Cutout, Front Mounted Receptacle D Max. J .005 [0.13] Dia. E .005 [0.13] H Dia. Front and Rear Panel Thk. .125 [3.18] Max. B C .010 [0.25] .010 [0.25] Panel Cutout, Rear Mounted Receptacle A Max. Plugs K Max. M .010 [0.25] Thread-Size: 7/8-20 UNEF-2A (Shell Size 14) 1-3/16-18 UNEF-2A (Shell Size 22) 1-7/16-18 UNEF-2A (Shell Size 28) L .015 [0.38] For drawings, technical data or samples, contact your sales engineer or call Technical Support. Series A B C D E F Dimensions G H J K L M 1.415 35.94 .745 18.92 .100 2.54 1.031 26.19 .906 23.01 1.185 30.1 1.070 27.18 1.070 27.18 .125 3.18 1.400 35.56 1.225 31.12 .380 9.65 1.415 35.94 .745 18.92 .100 2.54 1.031 26.19 .906 23.01 1.185 30.1 1.070 27.18 1.070 27.18 .125 3.18 1.400 35.56 1.225 31.12 .380 9.65 .790 20.07 .790 20.07 .875 22.23 .103 2.62 .103 2.62 .125 3.18 1.503 38.18 1.503 38.18 1.900 48.26 1.250 31.75 1.250 31.75 1.562 39.67 1.534 38.96 1.534 38.96 1.950 49.53 1.156 29.36 1.156 29.36 1.610 40.89 1.554 39.47 1.554 39.47 1.970 50.04 .120 3.05 .120 3.05 .145 3.68 .380 9.65 .380 9.65 .380 9.65 .875 22.23 .125 3.18 1.900 48.26 1.562 39.67 1.950 49.53 1.610 40.89 1.970 50.04 .145 3.68 1.560 39.62 1.265 32.13 1.560 39.62 1.560 39.62 1.840 46.74 1.750 44.45 1.750 44.45 2.170 55.12 Rev. 1.190 30.22 1.470 37.34 1.555 39.5 1.540 39.12 1.260 31.00 2.170 55.12 .380 9.65 22-28 Std. Rev. .934 23.72 .790 20.07 .103 2.62 1.503 38.18 1.250 31.75 1.534 38.96 1.156 29.36 1.554 39.47 .120 3.05 1.295 32.89 1.750 44.45 .380 9.65 28-57 Rev. 1.229 31.22 1.229 31.22 .875 22.22 .875 22.22 .125 3.18 .125 3.18 1.900 48.26 1.900 48.26 1.562 39.67 1.562 39.67 1.950 49.53 1.950 49.53 1.610 40.89 1.610 40.89 1.970 50.04 1.970 50.04 .145 3.68 .145 3.68 1.408 35.76 1.408 35.76 2.170 55.12 2.170 55.12 .380 9.65 .380 9.65 1.755 44.58 .790 20.07 .103 2.62 1.503 38.18 1.250 31.75 1.534 38.96 1.156 29.36 1.554 39.47 .120 3.05 1.805 45.85 1.750 44.45 .380 9.65 1.825 46.36 .875 22.22 .125 3.18 1.900 48.26 1.562 39.67 1.950 49.53 1.610 40.89 1.970 50.04 .145 3.68 2.125 53.98 2.170 55.12 .380 9.65 1.825 46.36 1.825 46.36 1.825 46.36 .875 22.22 .875 22.22 .875 22.22 .125 3.18 .125 3.18 .125 3.18 1.900 48.26 1.900 48.26 1.900 48.26 1.562 39.67 1.562 39.67 1.562 39.67 1.950 49.53 1.950 49.53 1.950 49.53 1.610 40.89 1.610 40.89 1.610 40.89 1.970 50.04 1.970 50.04 1.970 50.04 .145 3.68 .145 3.68 .145 3.68 2.125 53.98 2.125 53.98 2.125 53.98 2.170 55.12 2.170 55.12 2.170 55.12 .380 9.65 .380 9.65 .380 9.65 Arrangement No. 14-5 14-7 Sex Std. Rev. Std. Rev. 22-14 Rev. 22-16 Std. 28-24 Std. Metal-Shell CPC Component Dimensions 1 Std. 28-37 2 28-63 22-3 3 28-7 4 Std. Std. Rev. Std. Rev. 28-13M Std. 28-16M Std. 28-22M Std. 72 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Note: All part numbers are RoHS Compliant. AMP Circular Connectors for Commercial Signal and Power Applications Metal-Shell CPC Connector Accessories Internal Threads Cable Clamps Material and Finish A Body and Clamp Halves--Zinc alloy, nickel plated Screws and Washers--Stainless steel Screw with Lock Washer (Two Supplied) .031 [0.79] Clamp Half (Two Supplied) Cable Clamp Body B .031 [0.79] C .031 [0.79] Plug (Shown for reference only) Cable Dia. Range Shell Size 14 22 28 A .938 23.83 .938 23.83 1.031 26.19 Dimensions B 1.175 29.85 1.432 36.37 1.593 40.46 Cable O.D. Range C 1.165 29.59 1.469 37.31 1.688 42.88 .225-.562 5.71-14.27 .325-.750 8.26-19.05 .450-.938 11.43-23.83 Thread Size Part No. 7/8-20 UNEF-3B 208945-5 1-3/16-18 UNEF-3B 208945-7 1-7/16-18 UNEF-3B 208945-8 Notes: 1. For Shell Size 22 Receptacle use plastic cable clamp Size 17 (See page 38), for Shell Size 28 Receptacle use plastic cable clamp Size 23 (See pages 38-39). Use Size 14 metal cable clamp for both plug and receptacle Size 14 connectors. 2. Metal cable clamps (Sizes 22 and 28) are for use with Metal-Shell CPC plugs ONLY. Cable Entry Seals Heat Shrinkable Sealing Boots Cable entry seals are used with jacketed cable to provide an environmentally sealed wire-toconnector system. They can be used with plugs. Thick Wall Boots Material Internal Sleeve--Nylon Outer Tubing--Polyolefin, black Shell Size Dimensions A B 22 3.000 76.20 28 Expanded Wall Thickness 1.250 31.75 .070 1.78 Sealing Range (Dia.) .550 - 1.250 13.97 - 31.75 Max. Recovered Inside Dia. .500 12.70 Part No. 54012-3 54012-4 Metal-Shell CPC Accessories B .010 [0.25] Protective Cap Assemblies (for Metal-Shell CPC Receptacles Only) Shell Size 14 22 Material and Finish Zinc alloy, nickel plated 28 Dimensions A B 1.225 .515 31.11 13.08 1.750 .635 44.45 16.13 2.170 .635 55.12 16.13 Part No. 213823-2 A .010 [0.25] 211903-1 3.000.010 [76.20.25] 211904-1 Bead Chain 73 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Engineering Notes 74 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Miniature Circular Plastic Connectors (CPC) Product Facts Two shell sizes: Size 8 (1-4) or Size 11 (5-9) contact positions Pre-positioned 1/4 turn coupling ring with positive lock and alignment feature Unique contact pattern for each position size helps prevent accidental mating with other position sizes Sealed to IP67 (Protected against immersion in water up to 1 meter for 1/2 hour) Front or rear jam nut panel mounting No assembly required Receptacle available in free-hanging or panel mount versions Alternate keys available AMP Miniature Circular Plastic Connectors (CPC) are available in wire-towire and wire-to-panel configurations. Utilizes existing MiniUniversal MATE-N-LOK stamped and formed contacts designed for up to 500 mating cycles when plated with gold or up to 50 cycles with tin plating. Wide variety of custom discrete type cable assemblies, terminated with Terminals and Splices, Soft Shell, and Circular Plastic Connectors and other crimp and massterminated products. Ideal for Industrial, Instrumentation and Transportation applications where size, contact density and environmental exposure are primary concerns. Capability to produce custom overmolded assemblies and insert and injection molding. Jacketed cable assemblies and discrete wire: Subminiature-D, SCSI, Circular Plastic, VHDCI, USB and Shielded Data Link Technical Documents Product Specification 108-2079 Miniature CPC Connectors Material and Finish Seal, Wire Entry--Elastomer, yellow or white Seal, Peripheral--Elastomer, gray Housing--Thermoplastic, black or red Protector, Seal--Thermoplastic, natural Ring, Coupling--Thermoplastic, black Nut, Jam--Brass, nickel plated Plate, Seal Retention-- Thermoplastic, black Miniature CPC Connectors Cable Assemblies Nylon housings offer good resistance to a wide range of chemical agents while the IP67 sealing helps prevent ingress of dirt or fluids that could have an adverse effect on the contact interface. For more information on our cable assembly capabilities, see our website at www.tycoelectronics.com/ cables 75 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Note: All part numbers are RoHS Compliant. AMP Circular Connectors for Commercial Signal and Power Applications Miniature Circular Plastic Connectors (CPC) (Continued) Shell Size 8 (4 Position shown) Receptacle Assembly, Panel Mount (Order pin contacts separately -- see page 75) 1.142 [29.00] 1.142 [29.0] .125 [3.18] .827 [21.00] .555 [14.10] .125 [3.18] Max. Panel Thickness Alignment Indicator 1/2-20 UNF-2A White Alignment Dot 5/8-24 UNEF-2A Jam Nut Thread & Flange Seal .555 [14.1] Receptacle Assembly, Free-Hanging (Order pin contacts separately -- see page 75) .606 [15.39] .394 [10.0] .551 [14.00] .413 [10.48] shown for reference only. Must be ordered Must be ordered separately. separately. .059 [1.5] .551 [14.00] 1.142.010 [29.000.25] 1/2-20 UNF-2A Thread 1/2-20 UNF-2A Thread White Alignment Dot White Aignment Dots 1.14 [29.00] Alignment Indicator Slots .669 [17.00] .413 [10.48] Miniature CPC Connectors Plug Assembly (Order socket contacts separately -- see page 75) .06 [1.50] .55 [14.10] 1.142 [29.0] Positive Lock Indicator 1/2-20 UNF-2A Jam Nut shown for reference only. Must be ordered separately. 5/8-24 Flange Seal shown for UNEF-2A reference only. Thread Positive Lock Indicator 1.142.010 [29.000.25] White Aignment Dots Alignment Indicator Slots .669 [17.00] Related Product Data Part Numbers--Page 74 Contacts--Page 75 Accessories--Page 75 76 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Miniature Circular Plastic Connectors (CPC) (Continued) Shell Size 11 (9 Position shown) Plug Assembly (Order socket contacts separately -- see page 75) Receptacle Assembly, Panel-Mount (Order pin contacts separately -- see page 75) .689 [17.50] 1.14 .010 [29.00 0.25] Jam Nut & Flange Seal shown for reference only. Must be ordered separately. .413 [10.48] Z White Alignment Dots K REF SEE TABLE .059 [1.50] .555 [14.10] O21.75 Z Positive Lock Indicator Alignment Indicator Slots 3/4-20 UNEF-2A Thread 1.14 [29.00] .866 [22.00] Receptacle Assembly, Free-Hanging (Order pin contacts separately -- see page 75) .555 [14.10] .059 [1.50] .689 [17.50] 3/4-20 UNEF-2A Thread Positive Lock Indicator .902 [22.90] 1.14 [29.00] Housing Part Numbers 8 1 8 2 8 3 8 4 11 5 11 6 11 7 11 8 11 9 Insulation Diameter Range .035-.059 [.89-1.5]* .059-.110 [1.5-2.39] .035-.059 [.89-1.5]* .059-.110 [1.5-2.39] .035-.059 [.89-1.5]* .059-.110 [1.5-2.39] .035-.059 [.89-1.5]* .059-.110 [1.5-2.39] .035-.059 [.89-1.5]* .059-.110 [1.5-2.39] .035-.059 [.89-1.5]* .059-.110 [1.5-2.39] .035-.059 [.89-1.5]* .059-.110 [1.5-2.39] .035-.059 [.89-1.5]* .059-.110 [1.5-2.39] .035-.059 [.89-1.5]* .059-.110 [1.5-2.39] Panel Mount Receptacle Housing Part Numbers Free-Hanging Receptacle 1445539-1 1445539-3 1445538-1 1445538-3 1445537-1 1445537-3 1445421-1 1445421-3 1445824-1 1445824-3 1445823-1 1445823-3 1445822-1 1445822-3 1445821-1 1445821-3 1445816-1 1445816-3 1445526-1 1445526-3 1445522-1 1445522-3 1445510-1 1445510-3 1445389-1 1445389-3 1445829-1 1445829-3 1445828-1 1445828-3 1445827-1 1445827-3 1445826-1 1445826-3 1445825-1 1445825-3 Plug 1445536-1 1445536-3 1445535-1 1445535-3 1445534-1 1445534-3 1445390-1 1445390-3 1445820-1 1445820-3 1445819-1 1445819-3 1445818-1 1445818-3 1445817-1 1445817-3 1445807-1 1445807-3 Miniature CPC Connectors Standard stocked Part Numbers in BOLD type. Arrangement Shell No. of Size Pos. Note: Alternate keys available (115 part numbers shown in above chart) *Insertion Tip (Seal Protector) Part No. 1604816-1 recommended for use when inserting socket contacts within this insulation range. 77 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Miniature Circular Plastic Connectors (CPC) (Continued) Contacts and Application Tooling Pin (for Receptacles) Contact Part Numbers Wire Size Range AWG [mm2] Ins. Dia. Range 30-26 [.05-.12] .035-.050 .889-1.27 26-22 [.12-.3] .047-.069 1.19-1.75 22-18 [.3-.8] or 22 x (2) [.3] .059-.094 1.50-2.39 or .067 x (2) 3.38 .671 [17.04] Socket (for Plugs) .659 [16.74] Contact Extraction Tool Part No. 189727-1 Instruction Sheet 408-4118 Contact Insertion Tool Part No. 455830-1 Instruction Sheet 408-7984 (For inserting contacts applied to small diameter wire) Insertion Tip (Seal Protector) Part No. 1604816-1 (For inserting socket contacts applied to small diameter wire) Pin Material and Finish Strip Form Brass, Pre-tin 770835-1 Phos. Brz., Pre-tin -- Brass, Duplex1 1-770835-0 Phos. Brz., Duplex1 -- Brass, Pre-tin 770901-1 Phos. Brz., Pre-tin -- Brass, Duplex1 1-770901-0 Phos. Brz., Duplex1 -- Brass, Pre-tin 770903-1 Phos. Brz., Pre-tin -- Brass, Duplex1 1-770903-0 Phos. Brz., Duplex1 -- Loose Piece 794059-1 -- 1-794059-0 -- 770985-1 -- 1-770985-0 -- 770987-1 -- 1-770987-0 -- Socket Strip Loose Form Piece 770834-1 794058-1 770834-4 -- 1-770834-0 1-794058-0 1-770834-1 -- 770902-1 770986-1 770902-4 -- 1-770902-0 1-770986-0 1-770902-1 -- 770904-1 770988-1 770904-4 -- 1-770904-0 1-770988-0 1-770904-1 -- HDM Applicator Part No. Hand Tool Part No. 567418-12 567418-22 567418-32 90717-2 567066-33 567066-43 567066-53 91529-1 567067-12 567067-22 567067-32 91522-1 1Duplex Finish - Plated with .000030 [.000762] min. gold in mating area and .000100 [.00254] min. tin in crimping area over .000050 [.00127] min. nickel underplate on entire contact. Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-LECTRIC Model G Machine. See page 133 for further information. 3HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -4 is used on AMP-O-LECTRIC Model K Machine, -5 is used on AMP-O-LECTRIC Model G Machine. See page 133 for further information. Note: All part numbers are RoHS Compliant. 2HDM Accessories (All accessories must be ordered separately.) Strain Reliefs Dimensions Shell Size A B 8 .925 [23.5] .709 [18.0] 11 1 1.10 [28.0] Open Style .964 [24.5] 2 Part Number Straight Right-Angle 1445730-1 1445771-1 1546746-31 1445856-1 1546746-42 B A With Cover Miniature CPC Connectors A Heat Shrink Boots Shell Size 8 11 Dimensions A B 2.00 [50.8] .75 [19.0] 2.50 [63.5] 1.00 [25.4] Flange Seals Shell Size 8 11 Dimensions A B .60 [15.3] .26 [6.6] .73 [18.5] .33 [8.5] Jam Nuts Shell Size 8 11 Dimensions A B .75 [19.0] .125 [3.2] .875 [22.25] .125 [3.2] B Part Number 1546997-1 1546921-1 Sealant Length Part Number 1445420-1 1445420-2 Thread 5/8-24 UNEF-2B 3/4-20 UNEF-2B B see chart for Threads Part Number 1604196-1 1445904-1 A .146 [3.70] Dust Caps Shell Size 8 11 Dimensions Part Number A B .795 [20.2] .551 [14.0] 1604089-1 .89 [22.6] .736 [18.7] 1604089-2 A .025 [0.64] 1.49.010 [37.90.25] B .025 [0.64] .094 [2.4] 78 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Application Tooling Mechanical Hand Tools for Interchangeable Die Sets SDE (Standard Die Envelope) Die Sets SDE die sets provide costeffective flexibility, through many options for a common die-set outline. The SDE die sets can be adapted for use with CERTI-CRIMP hand tools, PRO-CRIMPER III hand tools, the SDE Terminator and the 626 Pneumatic Tool System. For more information, request Catalog 1654003. PRO-CRIMPER III Hand Tool, Part No. 58495-1 Commercial grade hand tool for crimping various products. Features ratchet control to provide complete crimp cycle. Accepts both pinned- and shoulderedstyle die sets. Locators are provided with pinned-style die sets for proper contact and wire positioning, and to help minimize contact rotation and bending during crimping. Approximate weight 1.3 lb [0.60 kg]. Premium grade hand tools. Feature ratchet control to provide complete crimp cycle. Die sets close in a straight line. Include a contact locator and wire stop, plus an insulation crimp adjustment lever, when applicable. Approximate weight 1.3 lb [0.59 kg] Premium grade hand tool. Features ratchet control to provide complete crimp cycle. The interchangeable die sets close in a straight line to minimize contact or terminal rotation during crimping. When applicable, user-assist features such as a contact or terminal locator and a wire stop, are built into the die set. Approximate weight 1.9 lb [0.86 kg]. An electric crimp terminator with compact design features a die set holder that is compatible with all AMP SDE (PRO-CRIMPER III Tool) die sets. Hand- or foot-actuated options are available. CE Approved. For more information, request Catalog 1654714. Lightweight, air-operated modular tooling system. Accepts a wide variety of interchangeable heads for crimping various types of contacts, terminals and splices onto wires ranging 6-26 AWG [13-0.12 mm2], plus coaxial and fiber optic cable. Available with either hand- or foot-actuation switch. Optional ratchet control available to provide complete crimp cycle. These tools are ideal for small production, prototype and experimental applications. They are used for terminating pin and socket contacts to wire and feature a ratchet device to provide consistently formed crimps. 112076 CERTI-CRIMP Straight Action Hand Tools (SAHT) 92936-8 CERTI-CRIMP "C" Head Straight Action Hand Tool (SAHT), Part No. 69710-1 Pneumatic Hand Tool for Interchangeable Die Sets 626 Pneumatic Tool System 112383 SDE Terminator, Part No. 1490076-2 For Type III+ contacts, see pages 17-19. For more information, request Catalog 65780. For subminiature coaxial contacts, see pages 22-23. For more information, request Catalog 65780, Instruction Sheet 408-2095. Application Tooling Electric Machine for Interchangeable Die Sets For use with Type III+ contacts, see pages 17-19. For more information, request Catalog 1773380, Instruction Sheet 408-9930. For subminiature coaxial contacts, see pages 22-23. For more information, request Catalog 124208. 79 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Application Tooling (Continued) Crimp Machines Semiautomatic bench machines for crimping reeled terminals and contacts, featuring a quiet and reliable direct motor drive, microprocessor controls for ease of setup and operation, and guarding and lighting designed for operator convenience and safety. All models are equipped with either manual or automatic precision adjustment of crimp height. Machinemounted sensors are available for crimp quality monitoring using conventional miniature-style applicators. AMP-TAPETRONIC Machine, Part No. 69875 AMP-O-LECTRIC Model "K" Terminating Machine with a permanently-mounted applicator that accepts interchangeable die sets to apply a variety of tapemounted terminals and splices. Many of the die sets can also be used in AMP-O-LECTRIC Terminating Machines with a tape applicator. For more information, contact Tyco Electronics. 103330 AMP-O-LECTRIC Model "G" Terminating Machines, Part Nos. 354500-1, -9, -11 For more information, request Catalog 1654956-2, Video 198116, Catalog 82275 [Crimp Quality Monitor (CQM)], Video 198094. Note: New Stripping Module available, see page 79. Crimp Quality Monitor (CQM) Part No. 1320420-2 The unique system provides 100% on-the-fly crimp inspection. It measures the crimp height of each termination, and evaluates the quality of each crimp. If a crimp is questionable, the monitor alerts the operator with both visual and audible alarms. It also provides ports for printing and networking. When used with AMP-O-LECTRIC Model "G" Termination Machines, the monitor is mounted to the machine. When used with AMPOMATOR CLS IV Lead Making Machines, it is integrated into the machine's operating system. Application Tooling For more information, request Catalog 82275. System III Applicator For more information, request Catalog 1654956-8 The System III Applicator introduces several new technologies into the applicator including a precision servo-electric motorized feeding system, a built-in data module for storing terminal crimp and set-up information, a precision fit round ram, and a newly designed terminal depressor. It still utilizes the proven quality of the HD-M crimper and anvil tooling. AMP 3K/40 and AMP 5K/40 Terminating Machines The AMP 3K/40 and AMP 5K/40 Terminators are designed for customers that require the increased output and quality of a semiautomatic machine at a competitive price. By incorporating the most commonly requested features as standard and offering a long list of optional equipment, these terminators offer flexibility to meet the specific needs of various applications at the lowest possible cost. 3,000 lb [1361 kg] max. crimp force (AMP 3K/40); 5,000 lb [2268 kg] max. crimp force (AMP 5K/40) Toolless removal of applicators and guards Jog capability Quiet, fast operation -- 80/76 dBA and cycle time less than 0.400 seconds Accepts Heavy Duty Mini stye applicators Wide range of optional equipment such as toolless precision crimp height adjust, batch counter, CQM capability and work light For more information, request Catalog 1654956-2. Note: New Stripping Module available, see page 79. 80 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Application Tooling (Continued) Lead Makers This fully-automatic, PCcontrolled leadmaker can be equipped with up to three processing stations enabling the crimping of both ends of the wire, double-crimp connections with three different contacts, singleended seal applications, tinning or ink-jet marking. Features include ultra-short conversions times, easy-touse graphic-based TopWin interface with multiplelanguage capability, crimp force analyzer with statistical analysis, seal monitoring, and integrated good/bad sorting. Komax gamma 333 PC Lead-Making Machine Komax 433-S alpha Lead-Making Machine For more information, request Catalog 1307901. The AMPOMATOR System III Leadmaker is designed for the demands of lowvolume/high mix manufacturing and precision quality. This leadmaker combines the best wire processing capabilities with new technologies in terminal feeding and machine set-up found in the System III Applicator to offer significant advantages for higher throughput and efficiencies. AMPOMATOR System III Leadmaker For more information, request Catalog 1307801. Applicators End-Feed Heavy-Duty Miniature Applicators (coded HDM) See catalog 1654956-5 for more information. Fully-automatic machines that measure, cut, strip and terminate single leads. Microprocessor-controlled, and programmed and operated using an easy-tofollow, menu-driven touchscreen. Features include direct-drive terminating units with precision crimp height adjustment, fully programmable setups, wire runout and splice detection, and motorized pre-feed with wire straightener. Crimp quality monitoring is also available. Interchangeable applicators for crimping products reeled end-to-end (primarily open-barrel terminals). Used in bench and leadmaking machines; most designs can be used, or adapted for use with minor tooling changes, dial-in settings for different wire sizes and insulation diameters. Mechanical or air-powered feed systems, depending on the product applied. For more information, request Catalog 296393-2 and Instruction Sheet 408-8039. EDGE Applicator Counter For more information, request Catalog 124324, Video 198142 (NTSC), 199609 (PAL). The new EDGE counter tracks wearable tool usage for the most effective maintenance planning. The completely electronic counter, with clear LCD display, indicates cycles since installation. By performing maintenance at measured intervals with preset limits, operators avoid breakdowns and rejects caused by tool wear or misadjustment. A wireless interface transfers counters to a PC running the optional Edge Counter Software Pack. The EDGE is standard on all new applicators and can be retrofitted to most existing Tyco Electronics applicators. Application Tooling 110234 AMPOMATOR CLS IV+ Lead-Making Machines, Part Nos. 356500-1, -2; 1213400-1, -2 The 433-S alpha offers maximum flexibility for applying seals to one or both ends of the wire with the corresponding terminal. When equipped with the mci 711 crimp terminator and mci 761 seal applicator, the fullyautomated 433-S alpha forms a highly compact system with optimum accessibility. Dynamic servo-drives provide fine travel settings on all motor axes and the wire straightening unit with quick-release lock and automatic lead-in feature reduces wire changeover time. The TopWin software provides for fast, simple data input. See catalog 1773385 for more information. 81 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Application Tooling (Continued) Interchangeable applicators for crimping products reeled side-by-side on single or dual carrier strips (primarily closed-barrel terminals and open-barrel contacts). Similar design as the end-feed version. All sidefeed applicators include a wire stop to help correctly position the wire end in the crimping target area. Side-Feed Heavy-Duty Miniature Applicators (coded HDM) Stripping Module (for the AMP 3K/40 and AMP 5K/40 Terminating Machines and AMP-O-LECTRIC Model "G" Terminator on page 77) 89828 For more information, request Catalog 1309085. Interchangeable applicators for crimping products in AMP-O-MATIC StripperCrimper Machines. Consist of separate ram and lower tooling assemblies. Similar dial-in settings for different wire sizes and insulation diameters as HDM applicators. Available with sensors for use with the Crimp Quality Monitor. Stripper-Crimper Applicators (coded SCA) 112075-2 For more information, request Catalog 296393-2 and Instruction Sheet 408-8040. Komax Delta 60 Wire Stripper For more information, request Catalog 65004 (AMP-O-MATIC StripperCrimper Machines), Catalog 82275 [Crimp Quality Monitor (CQM)]. 89827 Cosmic 30M Wire Stripping Machine, 5-528367-0 Application Tooling Semiautomatic bench crimping machines that also strip the wire, and are therefore used for terminating jacketed cable. Feature manual precision adjustment of crimp height, keyed strip blades for faster, more accurate setups, and an efficient scrap removal system. All adjustments can be made from the front of the machines without special tools. Available with crimp quality monitoring. The semiautomatic Delta 60 is designed to strip single- and multiple-pole conductors with pull-off lengths of .984 [25] or 3.78 [96]. Thanks to the electric drive and nonpneumatic design, the device is quick and quiet in operation and can be utilized virtually anywhere. The Delta 60 can desheath or strip stranded conductors and multiple wire cables with external diameters of up to .433 [11]. See catalog 1654956 for more information. Stripper-Crimper Machines AMP-O-MATIC StripperCrimper Machines, Part Nos. 1320895-1, -2 The combination of the Stripping Module with the AMP 3K/40 and AMP 5K/40 Terminating Machines or the AMP-O-LECTRIC Model "G" Terminator provides an economic and proficient method of stripping the wire and crimping terminals on the same machine. The module accepts End- and SideFeed HDM Applicators (32-14 AWG) and operates in three modes: crimp only, strip only, or strip and crimp. It can be installed on existing machines in the field or purchased as one unit from the factory. The Cosmic 30M is a high precision, high speed electrical wire stripper that is very easy to operate. It's equipped with a four blade system and an optional gripper for more difficult wires. There is a digital display for the wire diameter that can be set at 0.01 mm increments. See catalog 1773385-2 for more information. Cosmic 927R Micro-Cable Stripper For more information, request Catalog 65004, Video 198075, Catalog 82275 [Crimp Quality Monitor (CQM)], Video 198094. The compact, lightweight, benchtop Cosmic 927R was designed and developed to reliably strip various insulation materials and micro-cable. From conductor diameter 36 to 10 AWG, the stripping diameter display can be set to within 0.1 mm increments. See catalog 1773385-4 for more information. 82 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Technical Documents Various technical documents are available for your use: Product Specifications describe technical performance characteristics and verification tests. They are intended for the Design, Component and Quality Engineer. 108-1579 108-2079 108-10024 108-10024-2 108-10024-3 108-10024-4 108-10037 108-10040 108-10042 108-40005 Sealed CPC Connectors with Removable Contacts Miniature CPC Connectors CPC Connectors (Series 1) (Series 2) (Series 3 & 4) Contacts, Type XII Metal-Shell CPC Connectors Contacts, Type III + Contacts, Size 20 DF Application Specifications describe requirements for using the product in its intended application and/or crimping information. They are intended for the Packaging and Design Engineer and the Machine Setup Person. 114-10000 114-10004 114-10005 114-10038 Contacts, Size 20 DF Contacts, Type III + Contacts, Type XII CPC Connectors Instruction Sheets provide instructions for assembling or applying the product. They are intended for the Manufacturing Assembler or Operator. 408-4317 408-6641 408-7582 408-7593 408-7901 408-8416 Two-Piece Sealed CPC Connectors Metal-Shell CPC Connectors Accessories for CPC Connectors CPC Connectors Application and Maintenance for AMP Hand Crimp Tool CPC Right-Angle Cable Clamp Assembly Application Tooling/Instruction Sheet Cross Reference Tool Part No. 58495-1 69710-1 91019-3 91067-2 Instruction Sheet 408-9819 408-2095 408-7276 408-7508 Tool Part No. 91285-1 305183 318813-1 Instruction Sheet 408-9404 408-1216 408-4374 Technical Documents 83 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Part Number Index Note: This part number index lists all cataloged parts by base number only. Complete part numbers (with prefixes and/or suffixes) are shown on the pages indicated. Part Number Index Part Number 51565 54010 54011 54012 54123 66098 66099 66100 66101 66102 66103 66104 66105 66106 66107 66108 66109 66180 66181 66182 66183 66253 66254 66255 66256 66259 66260 66261 66262 66331 66332 66358 66359 66360 66361 66393 66394 66399 66400 66405 66406 66424 66425 66428 66429 66504 66505 66506 66507 66563 66564 66565 66566 66569 66570 66597 66598 66600 66601 Page 22,23 52 52 52,71 52 17 17 17 17 17 17 17 17 17 17 17 17 20 20 20 20 34 34 34 34 34 34 34 34 17 17 17,18 17,18 17,18 17,18 17 17 17 17 17 17 17 17 17 17 29 29 29 29 17,57 17 17,57 17 30 30 17,18 17,18,57 17 17,18,57 Part Number 66602 66740 66741 81665 164159 164160 164161 164162 164163 164164 193844 193846 193990 193991 200333 200336 200821 201328 201330 201332 201334 201568 201570 201578 201580 201611 201613 202236 202237 202410 202411 202507 202508 202725 202726 204219 205089 205090 205838 205839 205840 205841 205842 205843 206036 206037 206038 206039 206043 206044 206060 206061 206062 206070 206125 206126 206127 206136 206137 206138 206150 206151 206152 206153 206207 Page 17,18 34 34 44,48,49,50,51 19 19 19 19 19 19 19 19 35 35 21 21 42 21 21 21 21 21 21 21 21 21 21 20 20 21 21 21 21 21 21 21 30 30 26,28 26 26 26 26 26 10,33,35,50 10,14,16,33,35,50 26 26 10,50 10,15,50 10,14,15,50 10,50 38 38,48,49,56 28 28 28 33 33 38 10,15,16,50 10,50 26 10,50 33 Part Number 206226 206227 206304 206305 206306 206322 206358 206404 206425 206426 206429 206430 206433 206434 206437 206438 206455 206458 206460 206485 206486 206508 206509 206512 206516 206518 206552 206554 206612 206613 206705 206708 206837 206838 206852 206903 206934 206966 207008 207052 207055 207216 207241 207292 207299 207303 207369 207387 207445 207446 207485 207486 207489 207490 207597 207774 207825 207890 208130 208131 208132 208223 208224 208283 208337 Page 33 33 53 10,15,50 10,50 38,48,49,56 38 14 33 33 10,15,50 10,50 26 26 26 26 27 28 28 26 26 42 42 38,53 14 14 14 14 37 37 10,50 10,15,50 10,15,16,50 10,50 27 52 12 38 38 53 40 27 41 13 40 12 27 41 52 52 37 37 41 41 42 39 12 13 10 10,50 12 12 13 13 44 Part Number 208338 208457 208459 208470 208471 208472 208473 208474 208475 208476 208477 208478 208479 208480 208481 208482 208483 208484 208485 208486 208487 208488 208489 208490 208491 208492 208493 208494 208495 208496 208497 208652 208657 208680 208714 208715 208716 208717 208718 208719 208720 208721 208800 208945 211102 211103 211398 211399 211400 211401 211766 211767 211768 211769 211770 211771 211772 211773 211824 211825 211839 211870 211903 211904 212618 Page 44 59 59 59 59 60 60 63 63 62 62 68 68 68 68 65 65 66 66 60 60 59 59 62 62 63 63 65 65 66 66 52 27 52 59 59 60 60 59 59 60 60 52 71 10 10 11 11,15,16,50 11,15 11,50 11,15 11 11,15 11 11,15 11 11,15 11 37 37 10 52 71 71 21 84 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Part Number Index (Continued) Part Number Page 52 56 56 33 12 57 57 56 56 56 57 57 57 13 12 13 12 12 10,11,26,33,48,49 10,26 10,11,26,33,37 10,11 71 13 13 13 13 47 47 47 47 10 10 10 10 11 11 12 12 13 12 13 12 10 10 10 10 11 11 48 48 49 49 48,51 49,51 48,49 48,49 48 49 51 51 51 51 52 39 Part Number 225088 226537 332056 332057 539972 745253 745254 770834 770835 770901 770902 770903 770904 770834 770985 770986 770987 770988 787610 788085 788088 788130 788153 788154 788155 788157 788158 788159 788188 788189 794058 795059 796075 796094 796095 796096 796112 796188 796190 796203 796207 796257 796260 796271 796272 796273 796274 796275 796276 796286 796287 796288 796291 796329 796330 796332 796348 796375 796379 796380 796381 796382 796387 796403 796404 Page Part Number 22 22,23 22 22,23 19 29 29 75 75 75 75 75 75 75 75 75 75 75 10 17 17 13 44 44 44 44 44 44 45 45 75 75 44 44 44 44 45 44 44 45 45 54 54 44 44 44 44 44 44 44 44 44 44 27 45 45 15 15 39 39 39 39 15 15 15 796405 796406 796407 796409 796433 796435 796437 796439 796449 796450 796497 796500 796501 796502 796964 796966 969789 969803 969807 969809 969811 969813 969817 1445389 1445390 1445420 1445421 1445510 1445522 1445526 1445534 1445535 1445536 1445537 1445538 1445539 1445730 1445771 1445807 1445816 1445817 1445818 1445819 1445820 1445821 1445822 1445823 1445834 1445825 1445826 1445827 1445828 1445829 1445856 1445904 1546347 1546348 1546349 1546350 1546746 1546921 1546997 1604089 1604196 1658537 Page 15 15 15 15 12 15 10 11 10 11 15 15 15 15 19 19 54 54 54 54 54 54 54 75 75 75 75 75 75 75 75 75 75 75 75 75 74 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 74 75 39 39 39 39 75 75 75 75 75 29 Part Number 1658538 1658539 1658540 1658543 1658544 1776088 1776089 1776903 1776904 1776905 1776906 5019024 5066682 5066683 Page 29 26 29 29 29 68 68 16 16 16 16 38 29 29 Part Number Index 213485 213570 213571 213581 213588 213603 213605 213650 213651 213652 213667 213668 213671 213729 213780 213781 213782 213798 213810 213811 213812 213813 213823 213825 213826 213827 213828 213841 213843 213845 213847 213848 213849 213850 213851 213852 213853 213854 213855 213856 213857 213858 213859 213860 213862 213864 213866 213868 213870 213889 213890 213893 213894 213899 213900 213902 213904 213905 213906 213919 213920 213925 213926 213933 213982 85 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Tooling Part Number Index Part Number 58448 58495 58541 69656 69690 69710 69875 90136 90140 90145 90225 90230 90231 90249 90250 90716 90717 90758 90759 90870 91002 91019 91067 91285 91503 91505 91515 91519 Page 29 17,19,80 21 23 23 22,23,34,47,76,80 21,77 21 34 34 17 21 21 21 21 17 75 75 75 75 17 34,80 80 29,80 29 17,19 17,19 17,18 Part Number 91521 91522 91523 91525 91529 91538 91539 91542 91549 91911 189721 189722 189727 189928 200893 217201 224155 305183 318161 318813 354500 354940 356114 356119 356304 Page 17,18, 57 75 17,19 29 75 21 21,22 17,57 29 23 17,18,19,21,22, 23,29,34,47,57 17,18,19,21,22, 23,29,34,47,57 75 17,18,19,21,22, 23,29,34,47,57 17,21 17,18,19,29,57 35 17,19,20,21,22,23,57,80 21,22,23,34,47 47,80 47,77 23 35 35 17,18,19,21,22,23, 29,34,47,57 Part Number Page 356500 356611 356612 455830 466321 466323 466324 466325 466326 466383 466422 466423 466585 466598 466741 466758 466900 466901 466906 466907 466908 466923 466942 466958 466963 466968 466979 567021 567036 78 47 47 75 17 17,19 17 17 17,18 17 29 29 17 17 19 29 29 29 17 17,19 17 17,18 17 17,18,57 29 29 17 34 29 Part Number Page 567066 567067 567363 567364 567418 567455 567801 567804 567834 567849 567867 567947 601966 601967 680114 680195 680197 680602 725840 1016002 1016015 1213400 1320420 1320895 1490076 1604816 75 75 17,57 17,18,57 75 34 29 29 57 29 17 17 30 19,21,22 19 47 47 17 19 29 29 78 77 79 76 75 Part Number Index Cross Reference: Non-Compliant to RoHS Compliant Part Numbers NonCompliant Part No. 19024-1 19024-2 19024-3 19024-4 19024-5 45098 66098-2 66098-7 66099-2 66100-7 66101-2 66102-7 66103-2 66104-7 2-66104-5 66105-2 66106-6 66107-2 66108-6 66109-2 66331-5 66332-5 66358-6 1-66358-2 1-66358-4 2-66358-0 66359-6 1-66359-1 RoHS Compliant Part No. 5019024-1 5019024-2 5019024-3 5019024-4 5019024-5 91539-1 1-66098-9 1-66098-8 1-66099-5 1-66100-9 1-66101-9 2-66102-5 1-66103-8 3-66104-0 3-66104-0 1-66105-9 1-66106-5 1-66107-1 1-66108-5 1-66109-7 1-66331-4 1-66332-4 1-66358-6 1-66358-8 1-66358-6 2-66358-1 1-66359-4 1-66359-5 38 38 38 38 38 21,22 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17,18 17,18 17,18 17,18 17 17,18 1-66359-7 66360-2 1-66360-5 66361-2 1-66361-5 66399-1 66400-1 66424-6 66425-6 5-66504-6 5-66504-7 5-66504-9 6-66504-0 5-66505-7 6-66505-0 6-66505-2 2-66506-4 2-66506-5 5-66506-7 5-66506-9 3-66507-0 3-66507-1 1-66359-9 1-66360-2 1-66360-6 1-66361-2 1-66361-6 1-66399-0 1-66400-0 1-66424-1 1-66425-2 1658537-1 1658537-2 1658537-3 1658537-4 1658538-3 1658538-2 66505-9 1658539-1 1658539-2 1658539-3 1658539-4 1658540-4 1658540-1 17,18 17,18 17,18 17,18 17,18 17 17 17 17 29 29 29 29 29 29 29 29 29 29 29 29 29 Page NonCompliant Part No. 5-66507-7 5-66507-9 66563-6 66564-6 66565-2 66566-2 66597-1 66598-1 66598-7 66601-1 66602-1 66682-6 66682-9 1-66682-1 66683-7 1-66683-0 202236-1 202236-2 202237-1 202237-2 206062-3 206062-4 206070-1 206070-3 206138-1 206138-2 206322-1 206322-2 206358-1 206358-2 206455-1 206455-2 206512-1 206512-2 206852-1 206852-2 206934-1 206934-6 206934-7 206934-9 206966-1 206966-2 207008-1 207008-2 207216-2 207216-8 207303-1 207303-3 1-207303-1 207369-1 RoHS Compliant Part No. 1658540-5 1658540-2 1-66563-1 1-66564-2 66565-7 66566-7 66597-8 66598-9 1-66598-0 1-66598-4 66601-9 66602-8 5066682-6 5066682-9 66682-4 5066683-7 1-5066683-0 202236-7 202236-5 202237-7 202237-5 1-206062-4 1-206062-7 206070-8 1-206070-0 206138-8 1-206138-0 206322-9 1-206322-0 206358-5 206358-6 1-206455-1 1-206455-2 206512-5 206512-6 1-206852-1 1-206852-2 1-206934-1 1-206934-8 1-206934-9 1-206934-7 206966-7 206966-9 207008-5 207008-6 1-207216-6 1-207216-7 1-207303-5 1-207303-3 1-207303-4 1-207369-1 Page 29 29 17,57 17 17,57 17 17,18 17,18,57 17,18,57 17,18,57 17,18 29 29 29 29 29 20 20 20 20 38 38 38,48,49,56 38,48,49,56 38 38 38,48,49,56 38,48,49,56 38 38 27 27 38,53 38,53 27 27 12 12 12 12 38 38 38 38 27 27 12 12 12 27 NonCompliant Part No. 207369-3 207774-1 207774-2 207825-1 207890-1 208132-1 208223-1 208223-3 208224-1 208224-2 208283-1 208657-1 208657-5 213588-1 213603-1 213603-2 213605-1 213729-1 213729-2 213729-4 213780-1 213781-1 213782-1 213798-1 213825-1 213826-1 213827-1 213828-1 213854-1 213855-1 213855-2 213856-1 213857-1 213858-1 213859-1 213902-1 213904-1 225088-1 225088-3 466598-1 1-745253-1 1-745253-3 1-745253-4 1-745253-6 1-745254-1 1-745254-3 1-745254-4 1-745254-6 770834-3 770834-6 770835-3 RoHS Compliant Part No. 1-207369-3 207774-3 207774-4 207825-9 207890-2 208132-2 208223-9 1-208223-0 2-208224-1 1-208224-2 208283-4 1-208657-1 1-208657-0 213588-2 213603-5 213603-6 213605-7 213729-9 213729-6 213729-8 213780-2 213781-9 213782-4 213798-3 1-213825-7 1-213826-1 213827-8 1-213828-6 213854-3 213855-4 213855-3 213856-4 213857-2 213858-3 213859-2 213902-3 213904-3 5-225088-1 5-225088-3 466598-2 1658543-3 1-745253-6 1658543-2 1658543-1 1658544-3 1-745254-6 1658544-2 1658544-1 1-770834-0 1-770834-1 1-770835-0 Page 27 39 39 12 13 12 12 12 13 13 13 27 27 12 57 57 57 13 13 13 12 13 12 12 13 13 13 13 12 12 12 13 12 13 12 48,49 48,49 22 22 17 29 29 29 29 29 29 29 29 75 75 75 NonCompliant Part No. 770901-3 770902-3 770902-6 770903-3 770904-3 770904-6 770985-3 770986-3 770987-3 770988-3 788130-1 794058-3 794059-3 796329-1 796348-1 796375-1 796375-2 796379-1 796380-1 796381-1 796382-1 796387-1 796387-2 796403-1 796403-2 796404-1 796405-1 796406-1 796407-1 796409-1 796433-1 796435-1 796435-2 796497-1 796500-1 796501-1 796502-1 1490076-1 1546347-1 1546348-1 1546349-1 1546350-1 1546746-1 1546746-2 RoHS Compliant Part No. 1-770901-0 1-770902-0 1-770902-1 1-770903-0 1-770904-0 1-770904-1 1-770985-0 1-770986-0 1-770987-0 1-770988-0 1-788130-1 1-794058-0 1-794059-0 1-796329-1 796348-2 1-796375-1 1-796375-2 796379-2 796380-2 796381-2 796382-2 1-796387-1 1-796387-2 1-796403-1 1-796403-2 1-796404-1 1-796405-1 1-796406-1 1-796407-1 1-796409-1 1-796433-1 1-796435-1 1-796435-2 1-796497-1 1-796500-1 1-796501-1 1-796502-1 1490076-2 1546347-2 1546348-2 1546349-2 1546350-2 1546746-3 1546746-4 Page 75 75 75 75 75 75 75 75 75 75 13 75 75 27 16 16 16 39 39 39 39 16 16 16 16 16 16 16 16 16 12 16 16 16 16 16 16 76 39 39 39 39 75 75 86 Catalog 82021 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Circular Connectors for Commercial Signal and Power Applications Global Contacts Americas Argentina - Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2211 Brasil - Sao Paulo Phone: +55-11-3611-1311 Fax: +55-11-3611-0397 Canada - Toronto Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: (Technical Support) Phone: +905-470-4425 Fax: +905-474-5525 Colombia - Bogota Phone: +57-1-231-9398 Fax: +57-1-660-0206 Mexico - Mexico City Phone: +52-55-1106-0800 +01-800-733-8926 Fax: +52-55-1106-0901 For Latin/South American Countries not shown Phone: +54-11-4733-2015 Fax: +54-11-4733-2083 United States - Harrisburg, PA Phone: +717-564-0100 Fax: +717-986-7575 Product Information Center: (Technical Support) Phone: +800-522-6752 Fax: +717-986-7575 Asia/ Pacific Australia - Sydney Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 Product Information Center: (Technical Support) Phone: +61-2-9840-8200 Fax: +61-2-9634-6188 India - Bangalore Phone: +91-80-285-40800 Fax: +91-80-285-40820 Indonesia - Jakarta Phone: +65-6482-0311 Fax: +65-6482-1012 Japan - Toyko Phone: +81-44-844-8111 Fax: +81-44-812-3207 Raychem & Identification Products Phone: +81-44-844-8183 Fax: +81-44-844-8184 Product Information Center: (Technical Support) Phone: +81-44-844-8013 Fax: +81-44-812-3200 Korea - Seoul Phone: +82-2-3415-4500 Fax: +82-2-3486-3810 Malaysia - Kuala Lumpur Phone: +60-3-78053055 Fax: +60-3-78053066 New Zealand - Auckland Phone: +64-9-634-4580 Fax: +64-9-634-4586 Philippines - Makati City Phone: +632-848-0171 Fax: +632-867-8661 People's Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Shanghai Phone: +86-21-2407-1588 Fax: +86-21-2407-1599 Taiwan - Taipei Phone: +886-2-8768-2788 Fax: +886-2-8768-2268 Singapore - Singapore Phone: +65-6482-0311 Fax: +65-6482-1012 Raychem Products Phone: +65-4866-151 Fax: +65-6545-514 Identification Products Phone: +65 (0) 6482-0311 Fax: +65 (0) 6481-5514 Thailand - Bangkok Phone: +66-2-955-0500 Fax: +66-2-955-0505 Vietnam and Indochina - Ho Chi Minh City Phone: +84-8 930-5546 Fax: +84-8 930-3443 Europe/ Middle East/Africa Austria - Vienna Phone: +43-1 90 5 60-0 Fax: +43-1 90 5 60-1333 Germany - Langen Phone: +49-6103-709-0 Fax: +49-6103-709-1223 Belgium - Kessel-Lo Phone: +32-16-35-23-00 Fax: +32-16-35-23-52 Germany - Speyer Phone: +49-6232-30-0 Fax: +49-6232-30-2243 Bulgaria - Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Germany - HTS Division - Neunkirchen Phone: +49-2247-305-0 Fax: +49-2247-305-122 Czech Republic - Kurim Phone: +420-5-41-162-111 Fax: +420-5-41-162-223 Greece - Athens Phone: +30-210-9370-396/397 Fax: +30-210-9370-655 Denmark - Glostrup Phone: +45-43-480-452 Fax: +45-43-441-414 Egypt - Cairo Phone: +20-2-29 04 281 Fax: +20-2-41 92 334 Estonia - Tartu Phone: +372-5138-274 Fax: +372-7400-779 Finland - Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250 France - Cergy-Pontoise Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: (Technical Support) Phone: +33-1-3420-8943 Fax: +33-1-3420-8623 Germany - Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: (Technical Support) Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Hungary - Budapest Phone: +36-1-289-1000 Fax: +36-1-289-1010 Ireland - Dublin Phone: +353-1-820-3000 Fax: +353-1-820-9790 Poland - Warsaw Phone: +48-22-45-76-700 Fax: +48-22-45-76-720 Romania - Bucharest Phone: +40-21-311-3479/3596 Fax: +40-21-312-0574 Russia - Moscow Phone: +7-495-926-5506/07/08/09 Fax: +7-495-926-5505 Russia - St. Petersburg Phone: +7-812-718-8192 Fax: +7-812-718-8193 Slovenia - Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 Italy - Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031116 Lithuania - Vilnius Phone: +370-5-2131-402 Fax: +370-5-2131-403 Sweden - Upplands Vasby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01 Netherlands - 's-Hertogenbosch Phone: +31-73-624-62-46 Fax: +31-73-621-23-65 Product Information Center: (Technical Support) Phone: +31-73-6246-999 Fax: +31-73-6246-998 Norway - Nesbru Phone: +47-66-77-8886 Fax: +47-66-77-8855 United Kingdom - Raychem & Identification Products Phone: +44-1793-528171 Fax: +44-1793-572-516 For Middle East/African Countries Not Shown Phone: +33-1-3420-8866 Fax: +33-1-3420-8300 South Africa - Port Elizabeth Phone: +2741-503-4500 Fax: +2741-581-0440 Spain - Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Product Information Center: (Technical Support): Phone: +34-93-291-0330 Fax: +34-93-200-3779 Israel - Yokneam Phone: +972-4-959-0508 Fax: +972-4-959-0506 United Kingdom - Swindon Phone: +44-8706-080-208 Fax: +44-1793-572-109 Product Information Center: (Technical Support) Freephone GB: 0800-267-666 Phone: +44-208-420-8341 or 8343 +44-208-420-8081 Switzerland - Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Turkey - Istanbul Phone: +90-212-281-8181/2/3 Fax: +90-212-281-8184 Ukraine - Kiev Phone: +380-044-206-2265 Fax: +380-044-206-2264 87 Printed in the U.S.A. Tyco Electronics Corporation www.tycoelectronics.com RoHS Ready AMP Circular Connectors for Commercial Signal & Power Applications Tyco Electronics Corporation Harrisburg, PA tycoelectronics.com 82021-XXX-MS-FP-Rev. 6-07 OG3B