IM-10RFCL-12 Vishay Dale Inductors Commercial, Molded FEATURES * Inductance range is 1H to 10,000H. * Proven reliability molded inductors. ELECTRICAL SPECIFICATIONS STANDARD ELECTRICAL SPECIFICATIONS MODEL* TEST SRF DCR RATED DC Q FREQ. MIN. MAX. CURRENT IND. (H) TOL. MIN. (MHz) (MHz) (Ohms) (mA) IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 IM-10RFCL-12 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 130 130 130 130 130 100 100 80 75 65 65 65 75 75 75 75 75 70 70 70 75 80 100 100 100 100 100 95 95 70 65 65 60 75 75 75 75 75 75 65 65 65 65 65 65 65 65 65 65 15 15 10 10 10 10 7.9 7.9 7.9 7.9 7.9 7.9 5 5 5 5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.5 1.5 1 1 1 1 0.79 0.79 0.79 0.50 0.50 0.50 0.50 0.50 0.40 0.40 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.15 136 124 112 100 92 82 72 68 64 58 52 46 40 36 32 29 26 24 22 21 20 18 16 14 13 12 11 10 9 7 6 5 4 3 2.5 2.0 1.9 1.7 1.5 1.4 1.2 1.0 0.95 0.80 0.75 0.70 0.60 0.50 0.45 0.03 0.03 0.03 0.03 0.04 0.04 0.04 0.05 0.05 0.06 0.06 0.11 0.15 0.23 0.3 0.4 0.5 0.6 0.7 1.1 1.3 1.8 2.4 2.8 3.2 4.8 6.4 9.5 12 13 14 15.5 17 18.5 20 22 24 27 29 32 35 40 45 49 53 60 67 75 80 4000 4000 4000 4000 3500 3500 3500 3100 3100 3000 3000 2400 1800 1600 1300 1150 1000 900 850 720 620 540 450 425 400 360 280 240 200 195 190 180 170 165 155 150 145 137 130 125 120 112 105 100 95 90 85 82 80 MECHANICAL SPECIFICATIONS Terminal Strength: Meets 5 pound pull test when tested per MIL-C-15305 (latest revision). DENSITY SPECIFICATIONS Weight: 4.1 grams maximum. ENVIRONMENTAL SPECIFICATIONS IRON CORE 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Inductance Tolerance: 10% on Q-Meter for 1H to 22H. 5% 1000 cps bridge for 27H to 10,000H. NOTE: L and Q are not always tested at the same frequency. Inductance values tested on Q-Meter are tested at standard test frequencies. Dielectric Strength: 700VRMS at sea level. Operating Temperature: - 55C to + 125C. Self-Resonant Frequency: Minimum SRF measured with full length leads on Grid-Dip Meter. Q: Measured on Q-Meter. Rating: 1/2 watt dissipation for L Models. Moisture Resistance: Meets requirements of MIL-C-15305. Shock Resistance: Meets requirements of MIL-C-15305. Vibration: High frequency, 10 Hz to 2000 Hz @ 20 G 10% maximum for 12 logarithmic swings, each of 20 minute duration repeated for each of three mutually perpendicular planes. DIMENSIONS in inches [millimeters] .310 [7.87] Dia. Max. 1.30 [33.02] Typ. Min. #21 .0285 .002 [.724 .051] TCW .900 [22.86] Max. MARKING -- Color coded ORDERING INFORMATION IM-10RFCL-12 MODEL 1.0H INDUCTANCE VALUE 10% INDUCTANCE TOLERANCE *Model electricals and tolerances shown. www.vishay.com 18 For technical questions, contact Magnetics@vishay.com Document Number 34036 Revision 02-Nov-01