ORN Vishay Thin Film Molded, 50 mil Pitch, Dual-In-Line Resistor, Surface Mount Network FEATURES * 0.068" (1.73 mm) maximum seated height * Rugged molded case construction with no internal solder * Low temperature coefficient ( 25 ppm/C) * JEDEC MS-012 STD variation AA package * Compliant to RoHS directive 2002/95/EC Actual Size TYPICAL PERFORMANCE ORN series resistor networks feature four isolated resistors with standard 50 mil pitch lead spacing. The networks feature close TCR tracking and tight ratio tolerance and are ideally suited for unity gain operational amplifier circuitry. The standard resistance offering listed are available for immediate delivery. TCR TOL. ABSOLUTE TRACKING 25 5 ABSOLUTE RATIO 0.1 0.05 STANDARD RESISTANCE OFFERING (R1 =) SCHEMATIC 8 R1 7 R1 6 R1 5 R1 500 10 k 1 k 20 k 2 k 50 k 4.99 k 100 k 5 k 1 2 3 Note * Consult factory for additional values and schematics 4 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio SPECIFICATIONS Passivated nichrome 8 500 to 100 k per resistor 25 ppm/C 5 ppm/C 0.05 % to 1.0 % 0.01 % to 0.5 % 100 mW 400 mW R 0.05 % R 0.015 % 0.1 ppm/V (typical) 100 V max. not to exceed P x R - 55 C to + 125 C - 55 C to + 150 C < - 30 dB 0.08 V/C R 0.01 % R 0.002 % CONDITIONS - 55 C to + 125 C - 55 C to + 125 C + 25 C + 25 C Maximum at + 70 C Maximum at + 70 C 2000 h at + 70 C 2000 h at + 70 C 1 year at + 25 C 1 year at + 25 C * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 60005 Revision: 25-Jan-10 For technical questions, contact: thinfilm@vishay.com www.vishay.com 15 ORN Molded, 50 mil Pitch, Dual-In-Line Resistor, Surface Mount Network Vishay Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters E B DIMENSION INCHES MILLIMETERS A 0.157 3.99 B 0.0165 0.0025 0.4 0.06 C 0.050 1.27 Resistance Value Code C F ORNA xxxx A G Date Code o D H Seating Plane I D 0.195 max. 4.93 E 0.008 0.001 0.20 0.03 F 0.028 0.001 0.71 0.02 G 0.239 0.005 6.07 0.13 H 0.068 max. 1.73 I 0.008 0.002 0.22 0.06 O 2 to 6 2 to 6 Note * Marking - Vishay symbol, part number from ordering information MECHANICAL SPECIFICATIONS DERATING CURVE Passivated nichrome Substrate Material Silicon Body 100 Precent of Rated Power Resistive Element Molded epoxy Terminals Copper alloy Lead (Pb)-free Option 100 % matte tin Tin Lead Option Sn90 Tin Lead and Lead (Pb)-free Finish Plated 100 % = 0.40 W 80 60 40 20 0 0 70 125 150 Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: ORNA1002AUF O O R N A 1 0 0 2 A U F R N T A 1 0 0 3 Z T S GLOBAL MODEL (3 or 4 digits) SCHEMATIC RESISTANCE ORN (Tin lead) A = 4 isolated equal resistors The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. ORNT (Lead (Pb)-free) (e3) Example: 1002 = 10K 1003 = 100K 4991 = 4.99K TOLERANCE AND RATIO TOLERANCE Abs. Tol. Ratio A = 0.1 % B = 0.1 % C = 0.25 % D = 0.5 % F=1% Q = 0.05 % (1) Z = 0.1 % (1) 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % 0.01 % 0.025 % PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (2) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 3000 TS = 100 min., 1 mult UF = TUBED Historical Part Number example: ORNA1001F (for reference purposes only) ORN SERIES A SCHEMATIC 1001 F RESISTANCE TOLERANCE AND RATIO TOLERANCE Notes (1) Tol. available 1K and up (2) Preferred packaging code www.vishay.com 16 For technical questions, contact: thinfilm@vishay.com Document Number: 60005 Revision: 25-Jan-10 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1