H&S Fx2 SERIES HALF-PITCH MULTI-FUNCTION General The FX2 series of connectors is a 1.27mm spacing 2 piece connector for use in board to board application. It employs Hirose Electrics many years of accumulated experience in high density devices. FX2 series offer you one of the mostvaried and complete 2 PIECE CONNECTOR lines of High Density Connectors such as PCB to PCB and PCB to IDC Socket applications. Available in 20, 32, 40, 52, 60, 68, 80, 100, and 120 way (Except 120 way for PCB to [DC Socket application.) Features [: Substrate-to-substrate type 1. With the straight dip type, flux penetration from the back side of the substrate at solder dipping is com- pletely eliminated. 2. Substrate stacking height can be set between 12 and 16 mm at 1 mm intervals. 3. Mating section is designed for mis-mating preven- tion. @ Substrate-to-cable type 1. Internal locking system permits positive locking and ejecting by a simple operation. 2. Two-step insulation displacement termination sys- tem permits simple and positive cable connection. 3. {UL2651) AWG # 28 flat cable (7/0.127mm) is ap- plicable. Applications @SMT type 1. High performance PPS resin insulator is compatible to VPS, IR and hot air reflew. 2. Gull wing-shaped lead is used for ease of checking soldered connection. 3. Use of positioning boss for substrate packing offers improved handling capability. 4. Soider-fixing reinforcement bracket, which dis- perses inserting/extracting stress, is available for optional specification. 5. The right-angled type has approximately 70% smal- ler mounting area than the conventional DIP type connector. Computers, computer peripherals, various OA machinery.O XY ( Material/ Finish Electrical Performance Item Material Finish Remark Item Condition Specification Dip type Poly-amide resin* Black Current rating 0.5A Insulator PBT resin and Voltage rating AG125V Socket i, i UL94V-0 Poly-amide resin Insulation resistance At DC250V 100MQ or hight SMT type PPS resin Light Brawn Withstanding voltage | 1 minute at specified valve AC300Vr.m.s i Less than 45mQ Receptacle Phosphor Bronze Contact resistance at 100mA DC A 40m Selective Contact Socket Gold Plating Phosphor bronze or Header Brass List of Stacking Variation Unit: mm t } Receptacle Dip Type SMT Type FX2C-2XS~1.27DSA(L} | FX2C2-3KS-1.27DSA(L) | FX2-3*S-1.27SV(L) Header FX2CA-3KS~1.27 DSA(L) | FX2CA2-%S-1.27DSA(L) FX2C-3K P-1.27DSA(L) 12 14 12.2 Dip Type | FX2CA~3* P-1.27DSA(L) FX2CA1~2% P-1.27DSA(L) 13 15 13.2 LT FX2CA2-2% P-1.27DSA(L) 14 16 14.2 SMT Type | FX2~-3%P-1.27SV(L) 121 14.1 12.3 rdering Format Board-to-Board Receptacle Series No. FX 2CA2 X Blank: Right Angle Cc: Straight No Board Cleaning CA: Straight Board Cleaning Stacking Height (For only DSA) Blank : Standard 2 :+2mm @ Board-to-Board Header Series Name L. L L: Locking Tab DS: Type of Termination Right Angle DSA: Straight Contact space: 1.27mm {s: Receptacle | No. of Positions 20, 32, 40, 52, 60, 68, 80, 100, 120 FX 2CA1 * P 1.27 DSAL Blank : Right Angle Cc: Straight No Board Cleaning CA: Straight Board Cleaning Stacking Height (For only DSA) Blank : Standard 1: +1n0 2: +2mm Note 1:C,CA types are Anti Solder an d Fiux Wicking Versions, -} po Tarr L: Locking Tab DS: DSA: Type of Termination Right Angle Straight Contact space: 1.27mm [P: Header 2: Board Cleaning : Connector and Board to be soaked in cleaning bath. 3: No Board Cleaning type ; No cleaning or Back-Board cleaning type. No. of Positions 20, 32, 40, 52, 60, 68, 80, 100, 120 S{ @ Board-to-Cable Socket BA: Socket without Ejector FX 2BA- SA- 1.27 R | S$: Socket | ar 1b6 Series No. jeneernrnnemnnn| Contact space: 1.27mm B: Socket with Ejectors A: Phosphor bronze terminal | | No. of Pin 20, 32, 40, 52, 60, 68, 80, 100 Board-to-Cable Header FX 2 BA PA 1.27.DSAL Series Name L: With board-tacking pin Dip terminal forms B: Straight cleaning-free type for locking DS : Right-angled type Right-angled type for locking BA: Straight cleaning type for locking DSA: Straight type |__| Contact pitch : 1.27mm | No. of Pin 20, 32, 40, 52, 60, 68, 80, 100 | P : Header | Series No. Blank : Phosphor bronze terminal A: Brass terminal @ Straight SMT Type Note 1 Cleaning type: Type with a drain port for immersion and cleaning Note 2 Cleaning-free type: Type without drain port for immersion and cleaning Note 3 20- and 30-pin straight type have phosphor bronze terminals. FX 2 - P 1.27 SV L | L: With Reinforcement Hardware| Type of Termination No. of Pin 20, 32, 40, 52, 60, 68, 80, 100, 120 SV : Straight SMT type P: Header S$: Receptacle Series No. ne Contact pitch :1.27mm | @ Header Right Angle SMT Type FX 2 A- * P-0.635 SH [Series Name} |_SH Right-angied SMT tps] None : With positioning boss A: Without positioning boss XN Mounting pitch :0.635mm P : Header No. of Pin 20,40,52,60,80 ) Straight Type FX2C-3%S-1.27DSA_ (Photo) FX2C-S-1.27DSAL(Fig.) A Receptacle-No Cleaning Type Number of Pin PC Board Layout (Mounting Side) | Cc Polarization Mark iB v wm of ~ I | In We. : A Tt] 7 TTL 8 0,3x0.5_ | Lf i 1,905 D 1.905 1.905 grat 42.3%! (Note) n = Number of Pin 20.8 292 3H" 1,905+0.05 ; 1,905+0.05 @ al bl G el bi : { t 1,905+0.05 Co a E a2 b2 be A h , P=1.27+0.05 | Polarization Mark ag1 @ byl (3.81) B+0.1 (3.81) DO ay @ bF D+0.1 (Note) When using version without Locking Tab, no hole is needed. Unit: mm HRS No, Name No, of Pins A B Cc D CL 572-2401-7 FX2C- 20S-1.27DSA 20 22.75 11.43 17.63 CL 572-2451-5 FX2C- 20S-1.27DSAL 19.05 CL 572-2402-0 FX2C- 32S-1.27DSA 32 30.37 19.05 25.25 CL 572-2452-8 FX2C- 328-1.27DSAL 26.67 CL 572-2403-2 FX2C- 40S-1.27DSA 40 35.45 24.13 30.33 CL 572-2453-0 FX2C- 40S-1,.27DSAL 31.75 CL 572-2404-5 FX2C~ 52S-1.27DSA 52 43.07 31.75 37.95 CL 572-2454-3 FX2C- 52S-1,27DSAL 39.37 CL 572-2405-8 FX2C- 60S-1.27DSA 60 48.15 36.83 43.03 CL $72-2455-6 FX2C- 60S-1.27DSAL . 44.45 CL 572-2406-0 FX2C- 68S-1.27DSA 68 53.23 41.91 48.11 CL 572-2456-9 FX2C- 68S-1.27DSAL 49.53- CL 572-2407-3 FX2C- 80S-1.27DSA 80 60.85 49.53 55.73 CL 572-2457-1 FX2C- 80S-1.27DSAL 57.15 CL 572-2408-6 FX2C-100S-1.27DSA 100 73.55 62.23 68.43 CL 572-2458~-4 FX2C-100S-1.27DSAL 69.85 CL 572-2409-9 FX2C-120S-1.27DSA 120 86.25 74,93 81.13 \ CL 572-2459-7 FX2C-120S-1.27DSAL ' 82.55 /i Receptacle-Cleaning Type @ Straight Type Number of Pin {o- aaa Polarization Mark ce nen onenene aN A _ Clearance Hol. , "Le | sf 1 eT oo oc \ i S0.3X0.5 FX2CA-*S-1.27DSA (Photo) La Dd. al FX2CA-S~-1.27DSAL (Fig.) | PC Board Layout (Mounting Side) 60.873! = 2 2.3*3-! (Note) n = Number of Pin 1.905+0.05 1 1.905+0.05 @ al bl te 1,905+0.05 22 be P=1.27+0.05 Polarization Mark aga b5- B+0.1 | .G.81) n n D+0.1 Day @ by (Note) When using version without Locking Tab, no hole is needed. Unit: mm HRS No, , Name No, of Pins A B c D CL 572-2501-1 FX2CA- 20S~1.27DSA 20 22.75 11,43 17.63 CL 572-2551-0 FX2CA~ 20S-1,27DSAL 19.05 CL 572-2502-4 FX2CA- 32S-1,27DSA 32 30.37 19.05 25.25 CL 572-2552-2 FX2CA~ 325-1.27DSAL 26.67 CL 572-2503-7 FX2CA- 40S-1.27DSA 40 35.45 24,13 30.33 CL 572-2553-5 FX2CA- 40S-1.27DSAL 31.75 CL 572-2504-0 FX2CA- 52S-1.27DSA 52 43.07 31.75 37.95 CL 572-2554-8 FX2CA- 52S-1.27DSAL 39.37 CL 572-2505-2 FX2CA- 608-1.27DSA 60 48.15 36.83 43.03 CL 572-2555-0 FX2CA- 60S-1.27DSAL 44,45 CL 572-2506-5 FX2CA- 68S-1.27DSA 68 53.23 41.91 48,11 CL 572-2556-3 FX2CA- 688-1,27DSAL 49.53 CL 572-2507-8 FX2CA- 80S-1.27DSA 80 60.85 49,53 55,73 CL 572-2557-6 FX2CA- 80S-1,27DSAL 57.15 CL 572-2508-0 FX2CA-100S-1.27DSA 100 73.55 62.23 68.43 CL 572-2558-9 FX2CA-100S-1.27DSAL 69.85 CL 572-2509-3 FX2CA-120S8-1.27DSA 120 86.25 74.93 81.13 CL 572-2559-1 FX2CA-120S-1.27DSAL 82.55 /) Straight Type (a Receptacle-No Cleaning Type __ Number of Pins xX 2 Polarization Mark | mot | ! - at yf | Til a on tT FX2C2-S-1.27DSA (Photo) o r FX2C2-KS-1.27DSAL(Fig.) 03X05 KS-1, 1B. 1.905 1.905 1,905 | PC Board Layout (Mounting Side) n= Numb i 40.8%! 2g2.3*31 (Note) mber of Pin 1.905+0.05 al bl e 1,905+0.05 Ot ~~ 1,905+0.05 a2 b2 or . ap @ b5-1 = Polarization Mark _ {| p=1.27+0.05 | a @ v2 (3.81) B+0.1 (3.81) 2 2 D+0.1 (Note) When using version without Locking Tab, no hole is needed. Unit: mm HRS No, Name No. of Pins A B Cc D CL 572-2421-4 FX2C2- 20S-1.27DSA 20 22.75 11.43 17.63 CL 572-2471-2 FX2C2- 20S-1.27DSAL 19.05 CL 572-2422-7 FX2C2- 32S-1.27DSA 32 30.37 19.08 25.25 CL 572-2472-5 FX2C2- 32S-1.27DSAL 26.67 CL 572-2423-0 FX2C2- 40S-1.27DSA 40 35.45 24.13 30.33 CL 572-2473-8 FX2C2- 40S-1.27DSAL 31.75 CL 572-2424-2 FX2C2- 52S-1.27DSA 52 43.07 31.75 37.95 CL 572-2474-0 FX2C2- 52S-1.27DSAL 39.37 CL 572-2425-5 FX2C2- 605-1.27DSA 60 48,15 36.83 43.03 CL 572-2475-3 FX2C2- 60S-1.27DSAL 44.45 CL 572-2426-8 FX2C2- 68S-1.27DSA 68 53.23 41.91 48.11 CL 572-2476-6 FX2C2- 68S-1.27DSAL 49.53 CL 572-2427-0 | FX2C2- 80S-1,27DSA 80 60.85 49.53 55.73 CL 572-2477-9 FX2C2- 80S~-1.27DSAL 57.15 CL 572-2428-3 FX2C2-1008-1.27DSA 100 73.55 62.23 68.43 CL 572-2478-1 FX2C2-100S-1.27DSAL 69.85 CL 572-2429-6 FX2C2-120S-1.27DSA 120 86.25 74.93 81.13 \ CL 572-2479-4 FX2C2-120S-1.27DSAL 82.55 SS)[f_ fi Receptacle-Cleaning Type @ Straight Type Polarization Mark FX2CA2-%S-1.27DSA (Photo) k= _Number of Pin Clearance Hole for cleaning FX2CA2-3* S-1.27DSAL (Fig.) 1.905 1.905 PC Board Layout (Mounting Side) 2$2.3*$! (Note) n = Number of Pin : 1.905+0.05 | 1.905+0.05 @ al bl te 1.905+0.05 a2 b2 ja" 1900 0.00 ; , ne aA P=1.27+0.05 Polarization Mark a9 1 bs 1 (3.81) | B+0.1 (3.81) O af @ b2 D+0.1 2 (Note) When using version without Locking Tab, no hole is needed. Unit: mm HRS No, Name No. of Pin A B Cc D CL 572- 2521-9 FX2CA2- 20S-1.27DSA 20 22.75 11,43 17.63 CL 572- 2571-7 FX2CA2- 20S-1.27DSAL 19.05 CL 572- 2522-1 FX2CA2- 32S-1.27DSA 32 30.37 19.05 25,25 CL 57225720 | FX2CA2- 32S-1.27DSAL 26.67 CL 572 2523-4 FX2CA2- 40S-1.27DSA 40 35.45 24.13 30.33 CL 572 2573-2 | FX2CA2- 40S-1.27DSAL 31.75 CL 572: 2524-7 FX2CA2- 52S-1.27DSA 52 43.07 31.75 37.95 CL 572-2574. 5 FX2CA2- 52S-1.27DSAL 39.37 CL 572-2525-0 | FX2CA2- 60S-1.27DSA 60 48.15 36.83 43.03 CL 572-2575-8 FX2CA2- 60S-1.27DSAL 44.45 CL 572-2526-2 | FX2CA2- 68S-1.27DSA 68 53.23 41.91 48.11 CL 572-2576-0 | FX2CA2- 68S-1.27DSAL 49.53 CL 572-2527-5 FX2CA2- 80S-1.27DSA 80 60.85 49.53 55.73 CL 572-2577-3 FX2CA2- 80S-1.27DSAL 57.15 CL 572-2528-8 FX2CA2-100S-1.27DSA 100 73.55 62.23 68.43 CL 572-2578-6 FX2CA2-100S-1.27DSAL 69.85 CL 572-2529-0 FX2CA2-120S-1.27DSA 120 86.25 74.93 81.13 \ CL 572-2579: 9 | FX2CA2-120S-1.27DSAL 82.55 SSA Receptacle ) @ Right Angle Type A 0.350. 5 SN a (1,45) 7.5 __ Number of Pin * 2 (0.95) Polarization Mark FX2-3S-1,.27DS (Photo) FX2-3 S-1.27DSL (Fig.) | PC Board Layout (Mounting Side) n = Number of Pin uw Q Mating Side 218 2- 42.3761 Y 60.8" 6 = @ al bl + = 8) a2 b2 G: Fie na cern (E- a n n -Hiet.. oe HEE a a_ & ; EEE SHE a9 1 bo 1 i Dt Dy | 1,27+0.05 Polarization Mark /| a9 9 (3.31) B+0.1 (3.32 . D+0.1 =I Unit: mm | HRS No. Name No. of Pins A B Cc D CL 572-2701-0 FX2- 20S-1.27DS 20 22.75 11.43 17.63 18.05 CL 572-2751-9 FX2- 20S-1.27DSL CL 572-2702-3 FX2- 32S-1.27DS 32 30.37 19.05 25.25 25.67 CL 572-2752-1 FX2- 32S-1.27DSL CL 572-2703-6 FX2- 40S-1.27DS 40 35.45 24.13 30.33 30.75 CL 572-2753-4 FX2- 40S-1.27DSL CL 572-2704-9 FX2- 52S-1.27DS 52 43.07 31.75 37.95 38,37 CL 572-2754-7 FX2- 52S-1.27DSL CL 572-2705-1 FX2- 60S-1.27DS 60 48,15 36.83 43.03 43.45 CL 572-2755-0 FX2- 60S-1.27DSL CL 572-2706-4 FX2- 68S-1.27DS 68 53.23 41.91 48.11 48.53 CL 572-2756-2 FX2- 68S-1.27DSL CL 572-2707-7 FX2- 80S-1.27DS 80 60.85 49.53 55.73 56.15 CL 572-2757-5 FX2- 80S-1.27DSL CL 572-2708-0 FX2-100S-1.27DS 100 73.55 62.23 68.43 68.85 CL 572-2758-8 FX2-100S-1.27DSL CL 572-2709-2 FX2-120S~1.27DS 120 86,25 74.93 81.13 81.55 \ CL 572-2759-0 FX2-120S-1.27DSL(a Header : | > @ Right Angil Type , | B ha 0.3X0.5 tot aa Teele tom, tite 2 Polarization Mark 4 10 iy 38 oo) ; & : NN t 4 wn! Co. | 4 oe 15.61 13.3)! FX2-3%P-1.27DS (Photo) FX2-3 P-1.27DSL(Fig.) @| PC Board Layout (Mounting Side) n = Number of Pin w oO} Mating Sid $18 ating Side . 2-92.38! | 40.89! gic; @al bl \ 18 a2 ) b2 oo mee GAG) a oe aga bg-1 an at b2 Polarization Mark |. P=1.27+0.05 2 2 2 (3.31) B+0.1 S C+0.1 Z & Unit: mm HRS No. Name No. of Pins A B Cc CL 572-2601-6 FX2- 20P-1.27DS 20 22.75 11.43 18.05 CL 572-2651-4 FX2- 20P-1.27DSL CL 572-2602-9 FX2- 32P-1.27DS 32 30.37 19.05 25.67 CL 572-2652-7 FX2- 32P-1.27DSL CL 572-2603-1 FX2- 40P-1.27DS 40 35.45 24.13 30.75 CL 572-2653-0 FX2- 40P-1.27DSL CL 572-2604-4 FX2- 52P-1.27DS 52 43.07 31.75 38.37 CL 572-2654-2 FX2- 52P-1.27DSL CL 572-2605-7 FX2- 60P-1.27DS 60 48.15 36.83 43.45 CL 572-2655-5 FX2- 60P-1.27DSL CL 572-2606-0 FX2- 68P-1.27DS 68 53,23 41.91 48.53 CL 572-2656-8 FX2- 68P-1.27DSL CL 572-2607-2 FX2- 80P-1.27DS 80 60.85 49.53 56.15 CL 572-2657-0 FX2- 80P-1.27DSL CL 572-2608-5 FX2-100P-1.27DS 100 73.55 62.23 68.85 CL 572-2658-3 FX2-100P-1.27DSL CL 572-2609-8 FX2-120P-1.27DS 120 86.25 74.93 81.55 \ CL 572-2659-6 FX2-120P-1.27DSL /(um Header-No Cleaning Type @ Straight Type ~ Number of Pin i = 2 ~ ! Polarization Mark 2 | ul 2 V | : os | | o a ___. . a Yt 2 0.30.5 el | | | 1.905 Cc FX2C-P-1.27DSA (Photo) FX2C-3* P-1.27DSAL(Fig.) | PC Boand Layout (Mounting Side) 2-238 (Note) 4 0.8*9 n = Number of Pin 1,905+0.05 al bl 1,905+0.05 Pie ba" 1,905 + 0.05 a2 b2 : ; e . o aZ-1 byl Polarization Mark / || P=1.27+0.05 (3.81) B0.1 (3.81) ap bp C+0.1 (Note) When using version without Locking Tab, no hole is needed, , Unit: mm HRS No. Name No. of Pins A B Cc CL 572-2201-8 FX2C- 20P-1.27DSA 20 22.75 11.43 CL 572-2251-6 FX2C- 20P-1.27DSAL 19.05 CL 572-2202-0 FX2C- 32P-1.27DSA 32 30.37 19.05 CL 572-2252-9 FX2C- 32P-1.27DSAL 26.67 CL 572-2203-3 FX2C- 40P-1.27DSA 40 35.45 24.13 CL 572-2253-1 FX2C- 40P-1.27DSAL 31.75 CL 572-2204-6 FX2C~ 52P-1.27DSA 52 43.07 31.75 CL 572-2254-4 FX2C- 52P-1.27DSAL 39.37 CL 572-2205-9 FX2C- 60P-1.27DSA 60 48.15 36.83 CL 572-2255-7 FX2C- 60P-1.27DSAL 44.45 CL 572-2206-1 FX2C~ 68P-1.27DSA 68 53.23 41.91 CL 572-2256-0 FX2C- 68P-1.27DSAL 49.53 CL 572-2207-4 FX2C- 80P-1.27DSA 80 60.85 49.53 CL 572-2257-2 FX2C- 80P-1.27DSAL 57.15 CL 572-2208-7 FX2C-100P-1.27DSA 100 73.55 62,23 CL 572-2258-5 FX2C-100P-1.27DSAL 69.85 CL 572-2209-0 FX2C-120P-1.27DSA 120 86.25 74.93 \ CL 572-2259-8 FX2C-120P-1.27DSAL 82.55 /@ Header-Cleaning Type @ Straight Type wiial.27 Clearance Hole for cleaning Clearance Hole for cleaning _ Number of Pin a i" _ rn 2 o fe (eee So: Le ~~ Polarization Mark , L ag | oo | oe | PET oF <4 \\0.3%0.5 i 1,905 c | NN 905 . 1. FX2CA-3X P-1.27DSA (Photo) 1.905 FX2CA- P-1.27DSAL(Fig.) | PC Board Layout (Mounting Side) : n = Number of Pin 262.3*%' (Note) 40.88 1,905+0.05 @ al bl 1.905+0.05 1 oe G Seg a 1 905 0.05 a2 b2 se CO n n +B iD: aga l b51 Polarization Mark J P=1.27+0.05 att bi B+0.1 (3.81) 2 2 C+0.1 (Note) When using version without Locking Tab, no hole is needed. Unit: mm HRS No. Name No, of Pins A B Cc CL 572-2301-2 FX2CA~ 20P-1.27DSA 20 22.75 11.43 CL 572-2351-0 FX2CA~ 20P-1.27DSAL 19.05 CL 572-2302-5 FX2CA~ 32P-1.27DSA 32 30.37 19.05 CL 572-2352-3 FX2CA- 32P-1.27DSAL 26.67 CL 572-2303-8 FX2CA- 40P-1.27DSA 40 35.45 24.13 CL 572-2353-6 FX2CA~ 40P-1.27DSAL 31.75 CL 572-2304-0 FX2CA- 52P-1.27DSA 52 43.07 31.75 CL 572-2354-9 FX2CA- 52P-1.27DSAL 39.37 CL 572-2305-3 FX2CA~ 60P-1.27DSA 60 48.15 36.83 CL 572-2355-1 FX2CA~ 60P-1.27DSAL 44.45 CL 572-2306-6 FX2CA- 68P-1.27DSA 68 53.23 41.91 CL 572-2356-4 FX2CA- 68P-1.27DSAL 49,53 CL 572-2307-9 FX2CA- 80P-1.27DSA 80 60.85 49.53 CL 572-2357-7 FX2CA- 80P-1.27DSAL 57.15 CL 572-2308-1 FX2CA~-100P-1.27DSA 100 73.55 62.23 CL 572-2358-0 FX2CA-100P-1.27DSAL 69.85 CL 572-2309-4 FX2CA~-120P-1.27DSA 120 86.25 74.93 CL 572-2359-2 FX2CA-120P-1.27DSAL 82.55 ){_ @ Straight Type li Header-No Cleaning Type \ _ Number of Pin * 2 | | | : it boo } FX2C1-%P-1.27DSA (Photo) os / | FX2C1-% P-1.27DSAL (Fig.) *SX08 1.908 1.908 . N1-905 PC Board Layout (Mounting Side) 22.3*%! (Note) $0.8*3! n= Number of Pin 1.905+0.05 ms A) al bl OE 1, 1.905 0.05 ot 1,905: 0.05 a2 b2 : hp n n atl @ b3-1 Polarization Mark 7 _.| P=1,27+0.05 | 2 2 : (3.81) B+0.1 (3.81) ) ay by r . C+0.1 (Note) When using version without Locking Tab, no hole is needed. Unit: mm / HRS No. Name No. of Pins A B c CL 572-2211-1 FX2C1- 20P-1.27DSA 20 22.75 11.43 CL 572-2261-0 FX2C1- 20P-1.27DSAL 19.05 CL 572-2212-4 FX2CI- 32P-1.27DSA 32 30.37 19.05 CL 572-2262-2 FX2C1- 32P-1.27DSAL 26.67 CL 572-2213-7 FX2CI- 40P-1.27DSA 40 35.45 24.13 CL 572-2263-5 FX2Cl- 40P-1.27DSAL 31.75 CL 572-2214-0 FX2CI- 52P-1.27DSA 52 43.07 31.75 CL 572-2264-8 FX2C1- 52P-1.27DSAL 39.37 CL 572-2215-2 FX2C1- 60P-1.27DSA 60 48.15 36.83 CL 572-2265-0 FX2Ci- 60P-1.27DSAL 44,45 CL 572-2216-5 FX2C1- 68P-1.27DSA 68 53.23 41.91 CL 572-2266-3 FX2C1~ 68P-1.27DSAL 49.53 CL 572-2217-8 FX2C1- 80P-1.27DSA 80 60.85 49.53 CL 572-2267-6 FX2C1- 80P-1.27DSAL 57.15 CL 572-2218-0 FX2C1-100P-1.27DSA 100 73.55 62.23 CL 572-2268-9 FX2C1-100P-1.27DSAL 69.85 CL 572-2219-3 FX2C1-120P-1.27DSA 120 86.25 74,93 CL 572-2269~1 FX2C1-120P-1.27DSAL 82.55(m Straight Type Header-Cleaning Type A ~ B 1.27 Clearance Hole for cleaning for cleaning Clearance Hole Number of Pin wih. = a aa Polarization Mark \ \ \ A 9.5 =} am 3.3 FX2CAI-3 P-1.27DSA (Photo) FX2CA1- P-1.27DSAL (Fig.) 2$2.3*3'! (ote) g0.8*8 | PC Board Layout (Mounting Side) n = Number of Pin 1.905+0.05 al bl 1.905+0.05 Nib 1,905 40.05 a2 b2 /* , fb: az-1 b5-1 Polarization Mark | p=1 27+0.05 n n _ 2740. . ) ab @ bs (3.81) B+0.1 (3.81) 2 2 C+0.1 (Note) When using version without Locking Tab, no hole is needed. Unit: mm HRS No. Name No. of Pins A B c CL 572-2311-6 | FX2CAI- 20P-1.27DSA 20 22.75 11.43 CL 572-2361-4 | FX2CAI- 20P-1.27DSAL 19.05 CL 572-2312-9 | FX2CAI~ 32P-1.27DSA 32 30.37 19.05 CL 572-2362-7 | FX2CAl- 32P-1.27DSAL 26.67 CL 572-2313-1 | FX2CAI- 40P-1.27DSA 40 35.45 24.13 CL 572-2363-0 | FX2CAI- 40P-1.27DSAL 31.75 CL 572-2314-4 | FX2CAI- 52P-1.27DSA 52 43.07 31.75 CL 572-2364-2 | FX2CA1- 52P-1.27DSAL 39.37 CL 572-2315-7 | FX2CAl- 60P-1.27DSA 60 48.15 36.83 CL 572-2365-5 | FX2CAI- 60P-1.27DSAL 44.45 CL 572-2316-0 | FX2CA1- 68P-1.27DSA 88 53.23 41.91 CL 572-2366-8 | FX2CAI- 68P-1.27DSAL 49.53 CL 572-2317-2 | FX2CAI- 80P-1.27DSA 80 60.85 49.53 CL 572-2367-0 |. FX2CA1- 80P-1.27DSAL 57.15 CL 572-2318-5 | FX2CA1-100P-1.27DSA 100 73.55 62.23 CL 572-2368-3 | FX2CA1-100P-1.27DSAL 69.85 CL 572-2319-8 | FX2CA1-120P-1.27DSA 120 86.25 74.93 \ CL 572-2369-6 | - FX2CA1-120P-1.27DSAL 82.55 1.905 beg, ann 1.905FX2C2-P-1.27DSA (Photo) a FX2C2- * P-1.27DSAL(Fig.) Mi Header-No Cleaning Type @ Straight Type A Polarization Mark \ TS omy Vy 10.5 2,25 22.3*9' (Note) 60.83 (@ PC Board Layout (Mounting Side) n = Number of Pin _ Number of Pin 1.905+0.05 @ al bl f Ly 1.905+0.05 pie es ~~ 1,905+0.05 a2 b2 Lb; Mae n n aZ- be-1 Polarization Mark f ,||_P=1.27+0.05 | 2 2 (3.81) B+0.1 | (3.81) ay @ bs C+0.1 (Note} When using version without Locking Tab, no hole is needed. Unit: mm HRS No. Name No. of Pin A B Cc CL 572-2221-5 FX2C2- 20P-1.27DSA 20 22.75 11.43 CL 572-2271-3 FX2C2- 20P-1.27DSAL 19.05 CL 572-2222-8 FX2C2- 32P-1.27DSA 32 30.37 19.05 CL 572-2272-6 FX2C2- 32P-1.27DSAL 26.67 CL 572-2223-0 FX2C2- 40P-1.27DSA 40 35.45 24.13 CL 572-2273-9 FX2C2- 40P-1.27DSAL 31.75 CL 572-2224-3 FX2C2- 52P-1.27DSA 52 43.07 31.75 CL 572-2274-1 FX2C2- 52P-1.27DSAL 39.37 CL 572-2225-6 FX2C2- 60P-1.27DSA 60 48.15 36.83 CL 572-2275~4 FX2C2- 60P-1.27DSAL 44.45 CL 572-2226-9 FX2C2- 68P-1.27DSA 68 53.23 41.91 CL 572-2276-7 FX2C2- 68P-1.27DSAL 49.53 CL 572-2227-1 FX2C2- 80P-1.27DSA 80 60.85 49.53 CL 572-2277-0 FX2C2- 80P-1.27DSAL 57.15 CL 572-2228-4 FX2C2-100P-1.27DSA 100 73.55 62.23 CL 572-2278-2 FX2C2-100P-1.27DSAL 69.85 CL 572-2229-7 FX2C2-120P-1.27DSA 120 86.25 74.93 CL 572-2279-5 FX2C2-120P-1.27DSAL 82.55 ~(a Header-Cleani @Straight Type FX2CA2-P-1.27DSA (Photo) FX2CA2- 3x P-1.27DSAL(Fig.) ng Type A B 127 ope 27 Clearance Hole for cleaning | Clearance Hole | forcleaning WoW M 4 cede ee ae X= Number of Pin 77 esse Se ee ee YG 2 ~ I Polarization Mark I i t | 1.905 1,905 1.905 2$2.3*}' (Note) $0,8*3! @ PC Board Layout (Mounting Side) n = Number of Pin 1,905+0.05 @ al bl . 1.905 + 0.05 At a eT 905 0.05 aa b2 fi ot ag- b5-1 Polarization Mark P=1.27+0.05 n n ee 14t ty. ax b= (3.81) | B+0.1 (3.81) Ory C+0.1 (Note) When using version without Locking Tab, no hole is needed. Unit: mm HRS No. Name No. of Pins A B Cc CL 572-2321-0 FX2CA2- 20P-1.27DSA 20 22.75 11.43 CL 572-2371-8 FX2CA2- 20P-1.27DSAL 19.05 CL 572-2322-2 FX2CA2- 32P-1.27DSA 32 30.37 19.05 CL 572-2372-0 FX2CA2- 32P-1.27DSAL 26.67 CL 572-2323-5 FX2CA2- 40P-1.27DSA 40 35.45 24.13 CL 572-2373-3 FX2CA2- 40P-1.27DSAL 31.75 CL 572-2324-8 FX2CA2- 52P-1.27DSA 52 43.07 31.75 CL 572-2374-6 FX2CA2- 52P-1.27DSAL 39.37 CL. 572-2325-0 FX2CA2- 60P-1.27DSA 60 48.15 36.83 CL 572-2375-9 | FX2CA2- 60P-1.27DSAL 44.45 CL 572-2326-3 | FX2CA2- 68P-1.27DSA 68 53.23 41.91 CL 572-2376-1 | FX2CA2- 68P-1.27DSAL 49.53 CL 572-2327-6 FX2CA2- 80P-1.27DSA 80 60.85 49.53 CL 572-2377-4 FX2CA2- 80P-1.27DSAL 57.15 CL 572-2328-9 FX2CA2-100P-1.27DSA 100 73.55 62.23 CL 572-2378-7 FX2CA2-100P-1.27DSAL 69.85 CL 572-2329-1 FX2CA2-120P-1.27DSA 120 86.25 74.93 \ CL 572-2379-0 FX2CA2-120P-1.27DSAL 82.55 Straight Type (a Receptacle SMT Type \ CL 72-2159-3 | al [| T T + T 1 af -4 a _~ eS bd t Ris T N 7 Tee S vcati al oPo-4-7 ~ A Magnification S FX2-% S-1.27SV (Photo) D . E FX2-S-1.27SVL (Fig.) -| | PC Board Layout (Mounting Side) on n = Number of Pin | -- f ou OF ee l ~ Too S a2 b2 (ae O41 Ox x R nh P wets 0;8)) Na Polarization Mark a9 by = N @) D+0.1 F+t0.1 3.1 Unit: mm HRS No Name o. of Pins) A B Cc D E F CL 572-2101-3 FX2- 20S-1.27SV 22.75 11.43 17.63 16,51 CL 572-2151-1 FX2- 20S-1.27SVL 25.75 21.15 CL 572-2102-6 FX2- 32S-1.27SV 30.37 19.05 25.25 24,13 CL 572-2152-4 FX2- 32S-1.27SVL 33.37 28.77 CL 572-2103-9 FX2- 40S-1.27SV 35.45 24.13 30.33 29.21 CL 572-2153-7 FX2- 40S~-1.27SVL 38.45 33.85 CL 572-2104-1 FX2- 52S-1.27SV 43.07 31.75 37.95 36.83 CL 572-2154-0 FX2- 52S-1.27SVL 46.07 41.47 CL 572-2105-4 FX2- 60S-1.27SV 48.15 36.83 43,03 41.91 CL 572-2155-2 FX2- 60S~-1.27SVL 51,15 46.55 CL 572-2106-7 FX2- 68S-1,27SV 53.23 41.91 48.11 46.99 CL 572-2156-5 FX2- 68S~-1.27SVL 56.23 51.63 CL 572-2107-0 FX2- 80S-1.27SV 60.85 49,53 55.73 54.61 CL 572-2157-8 FX2- 80S-1.27SVL 63.85 59.25 CL 572-2108-2 FX2-100S-1.27SV 73.55 62.23 68.43 67.31 CL 572-2158-0 FX2-100S-1.27SVL 76.55 71.95 CL 572-2109-5 FX2-120S-1.27SV 86.25 74.93 81.13 80.01 FX2-120S-1.27SVL 89.25 84.65(a Header SMT Type Straight Type 8.6 pA ase 7 A Magnification (0.1) 1.4 (0.1) ble oS FX2-P-1.27SV_ (Photo) A FX2-3 P-1.27SVL (Fig.) @ PC Board Layout (Mounting Side) a2 Of (1.1) n = Number of Pin 9., @ al bl Oe a2 ) b2 n n_ @ Polarization Mark P=1.27+0.05 a5 b5 BEO.1 C+0.1 3.1 E+0.1 Unit: mm HRS No Name No. of Pin A B Cc D E CL 572-2001-9 FX2- 20P-1.27SV 20 22.75 11.43 16.51 CL 572-2051-7 FX2- 20P-1.27SVL 25.75 21.15 CL 572-2002-1 FX2- 32P-1.27SV 32 30.37 19.05 24.13 CL 572-2052-0 FX2- 32P-1.27SVL 33.37 28.77 CL 572-2003-4 FX2- 40P-1.27SV 40 35.45 24.13 29.21 CL 572-2053-2 FX2- 40P-1.27SVL 38.45 33.85 CL 572-2004-7 FX2- 52P-1.27SV 52 43.07 31.75 36.83 CL 572-2054-5 FX2- 52P-1.27SVL 46.07 41.47 CL 572-2005-0 FX2- 60P~1.27SV 60 48.15 36.83 41.91 CL 572-2055-8 FX2- 60P-1.27SVL 51.15 46.55 CL 572-2006-2 FX2- 68P-1.27SV 68 53.23 41.91 46.99 CL 572-2056-0 FX2- 68P-1.27SVL 56.23 51.63 CL 572-2007-5 FX2- 80P-1.27SV 80 60.85 49.53 54.61 CL 572-2057-3 FX2- 80P-1.27SVL 63.85 59.25 CL 572-2008-8 FX2-100P-1.27SV 100 73.55 62.23 67.31 CL 572-2058-6 FX2-100P-1,.27SVL 76.55 71.95 CL 572-2009-0 FX2-120P-1.27SV 120 86.25 74.93 80.01 \ CL 572-2059-9 FX2-120P-1.27SVL 89.25 84.65 0.25 ao 17\ Header SMT Type = bl 2- $1.5 a bx * @ Right-angled Type ait j . nasssoma fi) l.) +B a male - 2 +O koe = Number of Pin 5) s Fy. FX2A- > P-0.635SH 1.8 2.9[- (| Mounting Example (for reference) (Note) 0,817 (D) Expanded Position A 5 F Positioning bosses are arranged asymmetrically on the right and left sides. it is possible, therefore, to mount on the surface of a printed cir- cuit board as illustrated above. | Dimensional Drawing of Note) FA2A type does not have either right or left positioning bosses as illustrated. @| Screw Fasting Example Recommended Land Patterns (Recommendation) 3.140.1 G+0.1 3.1+0.1 F+0.05 Nut(M2) (D) (E) 0.817540, 05 B+0.05 | P=0.635+0.05 7 T Fitting Side = gun 0.4+0.03 ait ) sste]] | 5] LZ. pp ee + ee = { H 8 \ 5 Flat washer (t=0.3) PCB(t=1.6) ~ af Hi ~ Vb tf. / - + : 3 Screw(M2) / Spring washer (t=0.5) + lame be = a T * Fils|c} No.b1 Noa2 Nob * . content e a Hl Noal Nobo Noa* * Use M2 screw with a recommended tightening torque of slegheal oo 0.15 (Nm). C+0.1 (Conforming printed circuit board thickness: t=1.6+0.1) Unit: mm HRS No. Part No. iin A B c D E F G CL572-2761-2 FX2-20P-0.635SH 6.85 8.85 157 20 22.75 12.065 18.05 21.15 CL572~2771-6 FX2A~20P-0.635SH _ _ _ CL572-2763-8 FX2-40P-0.635SH 13.20 15.20 28.40 40 35.45 24,765 30.75 33.85 CL572-2773-1 FX2A-40P-0.635SH _ _ _ CL572-2764-0 FX2-52P-0.635SH 17.01 19.01 36.02 2 43.07 32.385 38.37 41.47 CL572-2774-4 FX2A-52P-0.635SH _ _ CL572-2765-3 FX2-60P-0.635SH 19.55 21.55 411 60 48.15 37.465 43.45 46.55 CL572-2775-7 FX2A-60P-0.635SH _ _ _ CL572-2767-9 FX2-80P-0.635SH 25.9 27.9 3.8 80 60.85 50.165 6.15 9.25 CL572-2777-2 FX2A-80P-0.635SH _ _ _ _ 18.(a Socket @IDC Socket with Ejectors FX2B-*S-1.27R @IDC Socket without Ejector FX2BA-3S~-1.27R 13.1 oo Mated Status Unit: mm HRS No. Part No. No. of pin A CL572-0621-2 FX2B-20SA-1.27R 20 27.83 CL572-0622-5 FX2B-32SA-1.27R 32 35.45 CL572-0623-8 FX2B-40SA~1.27R 40 40.53 CL572-0624-0 FX2B~52SA~1.27R 52 48.15 CL572-0625-3 FX2B-60SA-1.27R 60 53.23 CL572-0629-4 FX2B-68SA~1.27R 68 58.31 CL572-0630-3 FX2B-80SA~1.27R 80 65.93 CL572-0628-1 FX2B-100SA-1.27R 100 78.63 a a f 7 13.1 A J oe Mated Status 5.1 Unit: mm HRS No. Part No. No. of pin A CL572-0671-0 FX2BA-20SA~1.27R 20 18.05 CL572-0672-3 FX2BA-32SA~1.27R 32 25.67 CL572-0673-6 FX2BA-40SA~1.27R 40 30.75 CL572-0674-9 FX2BA-52SA~1.27R 52 38.37 CL572-0675~1 FX2BA-60SA~1.27R 60 43.45 CL572-0676-4 FX2BA-68SA~1.27R 68 48.53 CL572-0677-7 FX2BA-80SA-1.27R 80 56.15 CL572-0678-0 FX2BA-100SA-1.27R 100 68.85 | Tooling Item HRS No. Part No. Guide Plate 550-0212-6 | FX2B(A)-GPA Connecting Press| 550-0082-2 | Hi-Flex Connecting Press \ Note) No HIF6 Cable Cutter FC601 is needed when FX2B (A) IDC connection is made. (Without /4 [UJ] cut IDC connection is made.) 19eo 20 W@ Header @Right Angle Type for IDC Socket with Ejectors wo [7 1.5) ro ti Polarization Mark FX2B-%PA-1.27DS (Photo) FX2B-3& PA-1.27DSL (Fig.) PCB Layout (Mounting Side) is n=Number of Pin oO Mating side 5 3 @ al bl +9. | 0.4 wl o 2 92.373! Y 60.8*% =e H a2 b2 Bie) -- yp. 4 af-1 bh-1 eh vn fie n n AT Dal wo} Polarization Mark L P=1.27+0.05 p (3.31) B+0.1 (3.30 C+0.1 12 2 Unit: mm HRS No. Part No. No. of pin A B Cc CL572-0721-7 FX28-20PA~1.27DS 20 30.33 11.43 18.05 CL572-0771-5 FX2B-20PA~1.27DSL CL572-0722-0 FX2B-32PA-1.27DS 32 37.95 19.05 25.67 CL572-0772-8 FX2B-32PA~1.27DSL CL572-0723-2 FX2B-40PA-1.27DS 40 43.03 24.13 30.75 CL572-0773-0 FX2B-40PA-1.27DSL CL572-07 24-5 FX28-52PA-1.27DS 52 50.65 31.75 38.37 CL572-0774-3 FX2B-52PA-1.27DSL. C1572-0725-8 FX2B-60PA-1.27DS 60 55.73 36.83 43.45 CL572-0775-6 FX2B-60PA-1.27DSL CL572-0726-0 FX2B-68PA-1.27DS 68 60.81 41.91 48.53 CL572-0776-9 FX2B-68PA~1.27DSL CL572-0727-3 FX2B-80PA-1.27DS 80 68.43 49.53 56.15 CL572-0777-1 FX2B-80PA-1.27DSL CL572-0728-6 FX2B-100PA~1.27DS 100 81.13 62.23 68.85 CL572-0778-4 FX2B-100PA~1.27DSL(u Header-No Cleaning Type @ Straight Type for IDC Socket with Ejectors Polarization Mark hg [ V CO) os, | JO merrell) =, a oy Wt : co 2:3x0.5 FX2B-3*PA-1.27DSA (Photo) FX2B-% PA-1.27DSAL (Fig.) (| PCB Layout (Mounting Side) n=Number of Pin 2 42.379! (Note) 40.83! a 1.905+0.05 @al bl ue - ~~ 1 1,90540.05 a? b2 fee 1.905 0.05 h h ao ce ee ct * $: je agl by~l Polarization Mark fA P=1,2740.05 | az @ bs (3.81) B+0.1- C+0.1 (Note) When using version without Locking Tab, no hole is needed. Unit: mm HRS No. Part No. No. of pin A B Cc CL572-0801-4 FX2B-20P-1.27DSA eo 20 30.33 14.43 CLS572-0851-2 FX2B-20P-1.27DSAL 19.05 CLS572-0802-7 FX2B-32P-1.27DSA 32 37.95 19.05 ae CL572-0852-5 FX2B-32P-1.27DSAL 26.67 CLS72-0823-7 FX2B-40PA-1.27DSA 40 43.03 24130 b= CL572-0873-5 FX2B-40PA-1.27DSAL 31.75 CL572-0824-0 FX2B-52PA-1.27DSA 52 50.65 31.75 CL572-0874-8 FX2B-52PA-1.27DSAL 39.37 CL572-0825-2 FX2B-60PA-1.27DSA ao 60 55.73 36.83 k= CL572-0875-0 FX2B-80PA-1.27DSAL 44.45 CL572-0826-5 FX2B-68PA~1.27DSA a 68 60.81 41.91 CL572-0876-3 FX2B-68PA1.27DSAL 49.53 CLS572-0827-8 FX2B-80PA~1.27DSA 80 68.43 49.53 a CL872-0877-6 FX2B-80PA~1.27DSAL 57.15 CL572-0828-0 FX2B-100PA-1.27DSA 100 81.13 62.23 a \ CL572-0878-9 FX2B-100PA~1.27DSAL 69.85 wo Kg on CO] io on 1D art!22 Polarization mark (- Header-Cleaning Type @ Straight Type for IDC Socket with Ejectors A : B i 1.27 Clearance Hole Clearance Hole for Cleaning for Cleaning a. | 9 8 [_ V I is c& fp ry oF Wi. _.._ x0 - Cc 0.3X0.5 oo FX2BA-PA-1.27DSA (Photo) FX2BA~* PA~1.27DSAL (Fig.) | PCB Layout (Mounting Side) n=Number of Pin 2~ 92.37%! (Note) 0.8*8! 1.905+0.05 al bl At a2 b2_ 1.905+0.05 af-l @ bj-1 nh @ bp P=1,27+0.05 | a5 9 (3.81) B+t0.1 (3.81) C+0.1 (Note) When using version without Locking Tab, no hole is needed. Unit: mm HRS No. Part No. No. of pin A B Cc CL572-0901-9 FX2BA~20P-1,27DSA 20 30.33 11.43 CL572-0951-7 FX2BA-20P-1,27DSAL 19.05 CL572-0902-1 FX2BA-32P-1.27DSA 32 37.95 19.05 CL572-0952-0 FX2BA-32P-1.27DSAL 26.67 CL572-0923-1 FX2BA-40PA-1.27DSA 40 43.03 24.13 CL572-0973-0 FX2BA~40PA-1.27DSAL 31.75 CL572-0924-4 FX2BA-52PA-~1.27DSA , 52 50.65 31.75 CL572-0974-2 FX2BA-52PA~1,27DSAL 39.37 CL872-0925-7 FX2BA-60PA-1.27DSA 60 55.73 36.83 CL572-0975-5 FX2BA-60PA-1.27DSAL 44.45 CL572-0926-0 FX2BA-68PA-1.27DSA 68 60.81 41.91 a CL572-0976-8 FX2BA-68PA-1.27DSAL 49.53 CL572-0927-2 FX2BA-80PA-1.27DSA 80 68.43 49.53 CL572-0977-0 FX2BA-80PA-1.27DSAL 57.15 CL572-0928-5 FX2BA-100AP-1.27DSA 100 81.13 62.23 a CL572-0978-3 FX2BA-100PA~-1.27DSAL 69.85(e Dip Type Application Chart Header FX2-P-1.27DS(L) 1.905 . __f[ 1.905 t } Staking Height Table tacl hs per I Fieaiep |FX2CA-#S| FXICA2-#S| 4 Receptacle. | A | B FX2CA-#P} 12 4 Height Table x By | Fxec(a) -#S | 18.5] 12 | FX2CAI-#P 13 15 FX2C(A)2-*S | 19.5} 14 FX2CA2-#P 4 16 | C \ i 1.905 \V 1.905 Receptacle Receptacle FX2-3%S-1.27DS(L) FX2-S-1.27DS(L) PK 1.905 g > Header A B a FX2C(A)-#P | 18.5} 12 FX2C(A)1-#P | 19.5] 13 ft FX2C(A)2-#P | 20.5] 14 1.905 Header FX2-3%P-1.27DS(L) FX2B(A)-SA-1.27R FX2B(A)-3%SA-1.27R =i] == Till nn FX2B(A)- P(A)-1.27DSA(L) FX2B-% PA~-1.27DS(L)(esr Type Application Chart FX2-P-1.27SV(L) 12.3 rr a! Cteeinintenaed FX2-S-1.27SV(L) FX2- P-1.27SV(L) eT 12.1 i= 1.905 FX2C(A)-3*S-1.27-DSA(L) FX2-3P-1.27SV(L) [ A | 14.1 _ ~) 1.905 FX2C(A)2-%S-1.27DSA(L) FX2-3 P-1.27SV(L) 18.6 = a | ~ N - 1.905 __- FX2-3S-1.27DS(L) FX2-3%S-1.27SV(L) ee.) \ Ld _ I x y 1.905 FX2C(A)-3*P-1.27DSA(L) FX2->%S-1.27SV(L) [ eS LLL NN o3 1.905 FX2C(A)1-3* P-1,27DSA(L) FX2-3%S~1,27SV(L) 7 3 a N x [ 1.905 FX2C(A)2-* P-1.27DSA(L) FX2-%S~-1.27SV(L) OO... w Cs _ q a 1.905 FX2-% P-1.27DS(L) HELL 12.2 24(e SMT Type Application Chart FX2(A) - P-0.635SH Receptacle A FX2C(A) 147 FX20(A)2 167 FX2C(A+2)-%S-1.27DSA(L) FX2(A) -* P-0.635SH 21.2 i tL FX2-% S-1.27DS (L) vue FX2(A) - P-0.635SH 14.9 FX2-%S-1.27SV(L) FX2(A) - > P-0.635SH FX2BA-%SA-1.27R 24.3 25No. of Pins 9 n= [{__ @ Connection Circuit Chart Type A,B pn Qn ee ee nnn co o,, ee O seo 3 59 Grn noo tco errr fe ne a? eG dqren decree een 9 5? 2 ~ weenie eee eee ee dene bee Je m . faa) [f] Onn ne nn nen tan 4 cae - v < Ot - - nnn nen denen ne S s. < we eee S < Cable 1 Cable 2 N & 3 5 6 7 oa 2 3 2 < 6 3 [s) vo Ss Sa Goma mM BET 4 g oO oS Se 3 fot S 3 o 7 8 S ea < 3 oO Type A,A N _ aa ere eres o TF Fo S owt so POG Oe ee -- -f -- e-- Oo * 2 o 2 t-_--) 2 -O.5 Oman pr ne feo penn roO i 2 T ~ S Q m L__@-~-}-~4~-~----~~-}--~-[-----]- ~o Nn mQ 7s ween f--p--------++--4 @ | i pe ~ < < @1 ~~} ~-------4--~+--~----! Le ON S nih ee ee oe L$$$ oe < < NY 2 mete nee Ese} 3 s we o a S oO 5 y Q eon a weneee & 8 2 oO 2 Ren Of 4 = mt twee c uf a 38 4 2 Oo os Oo = s 2 Gon w c QS = OM Lee exc < < o O 26.Function [ } | : ~ (Header) (Receptacle, Socket) PCB to PCB Type FX2~3K P-1.27DS(L) FX2-2% S~1.27DS(L) Right Angle Type . Right Angle Type FX2(A)-2% P-0.635SH Right Angie Type SMT Type FX2C 2K ~ 2 P-7.27DSA(L) . FX2C 3% - 2X S-1.27DSA(L) Straight Type Straight Type Anti Solder and Flux Wicking, ; Anti Solder and Flux Wicking, No Cleaning Type No Cleaning Type FX2CA3K 3K P-1.27 DSA(L) FX2CA}K-%S-1.27DSA(L) Straight Type Anti Solder and Flux Wicking, Cleaning Type ' Straight Type : Anti Solder and Flux Wicking, Cleaning Type FX2-3% P~1.27SV(L) Straight Type FX2-3 S~1.27SV(L) Straight Type SMT Type SMT Type @PCB to IDC Socket Right Angle Type for IDG IDC Socket without Ejector Socket with Ejectors FX2B-3% P-1.27DS(L) FX2BA-3KSA-1.27R FX2B-3X P-1.27DSA(L) Straight Type for IDC FX2B-2KSA-1.27R _ Socket with Ejectors IDC Socket with Ejectors Anti Solder and Flux Wicking, No Cleaning Type FX2BA-2% P- 1.27 DSA(L) Straight Type for IDC Socket with Ejectors Anti Solder and Fiux Wicking, Note 1. (L) DIP type : with board-tacking pin SMT type : with reinforcement Cleaning,Type hardware ...... Can be used for checking. \ / 27How to Use Connectors r ~ 1. Connector selection (1) If you require no board cleaning after wave solder, you should select the anti solder and flux wicking con- struction of our FX2C sereis of connectors, with straight dip solder contacts. However, if board cleaning after wave solder is required or desired, you should select our FX2CA series of connectors, with right angle contacts. Clean right-angle connectors (F X2-*, FX2B-*) with liquid free from impurities. (2) If subject to vibration, impact, or load, socket cable type connectors must be lockable. Also, do not fail to clamp the cable if they are subject to load. 2. Temporary PCB hold down Versions of the FX2 series are available with temporary PCB hold down pins for the wave solder process. (Applicable board thickness t= 1.6 0.1) Locking Tab Dip Post Note: When mounting a connector on a board fixing pin is temporarily pushed into the hole after the dip post is guided into the board through-hole, thereby preventing breaking of the post. 3. Coupling Gap Tolerance The GAP between a mated pair of FX2 connectors is less than 1 mm. (except Socket with Ejectors) (Examples) FX2C-* P-1.27DSA and FX2C-* S-1.27DSA Less than 1 mm 14 & yy SS YVIVY 4, Precaution when using Socket with Ejectors (1) Insert the connector upto the (2) When pulling the socket out of (3) Do not push the ejectors out- end without the gap between the header, push both sides of side. socket and header. the ejectors inside and then pull the socket out. When pushing only one side of the ejectors and pulling it out, the connector might possibly be broken. 28r 5. SMT type connector packaging temperature profile 6. Inter-board gap when SMT connectors are used thickness of the solder. (reference) @IR Reflow Printed Circuit Board Dimension : 110* 40X 1.6 (mm) o| be 240 Material : Glass epoxy D Cream Solder: 3 Composition : 63Sn/37Pb (with flux content of 11wt%) 2 200 - Metal mask thickness: 0.2 mm (Straight type) & 0.5 mm (Right-angled type) 100 } MAX 2 F608 tg 608 Oy OS Time (sec.) et I The gap dimensions between boards mounting male and female connectors as shown in the Application Drawing, exclude the thickness of solder Paste. Thus, note that the actual gap will increase by the 29