New Product V60100C & VB60100C Vishay General Semiconductor Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.36 V at IF = 5 A FEATURES * Trench MOS Schottky technology TMBS (R) TO-220AB TO-263AB * Low forward voltage drop, low power losses K * High efficiency operation * Low thermal resistance 2 2 1 V60100C * Meets MSL level 1, per J-STD-020, LF maximum peak of 245 C (for TO-263AB package) 1 3 VB60100C PIN 1 PIN 2 PIN 1 PIN 3 CASE PIN 2 * Solder bath temperature 275 C maximum, 10 s, per JESD 22-B106 (for TO-220AB) K HEATSINK * Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency converters, switching power supplies, freewheeling diodes, OR-ing diode, dc-to-dc converters and reverse battery protection. PRIMARY CHARACTERISTICS IF(AV) 2 x 30 A VRRM 100 V MECHANICAL DATA IFSM 320 A Case: TO-220AB and TO-263AB VF at IF = 30 A 0.66 V TJ max. 150 C Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL V60100C VB60100C UNIT VRRM 100 V IF(AV) 60 30 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 320 A Non-repetitive avalanche energy at TJ = 25 C, L = 140 mH per diode EAS 450 mJ Peak repetitive reverse current at tp = 2 s, 1 kHz, TJ = 38 C 2 C per diode IRRM 1.0 A Voltage rate of change (rated VR) dV/dt 10 000 V/s TJ, TSTG - 40 to + 150 C Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) Operating junction and storage temperature range Document Number: 88942 Revision: 24-Jun-09 per device per diode For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product V60100C & VB60100C Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Breakdown voltage IR = 1.0 mA Instantaneous forward voltage per diode (1) Reverse current at rated VR per IF = 5 A IF = 10 A IF = 15 A IF = 20 A IF = 30 A SYMBOL TYP. MAX. VBR 100 (minimum) - 0.45 0.52 0.58 0.63 0.73 0.63 0.79 0.58 0.70 TA = 25 C TA = 25 C VF UNIT V IF = 5 A IF = 10 A IF = 15 A IF = 20 A IF = 30 A TA = 125 C 0.36 0.45 0.53 0.58 0.66 VR = 80 V TA = 25 C TA = 125 C 24 13 500 20 A mA VR = 100 V TA = 25 C TA = 125 C 65 30 1000 - A mA SYMBOL V60100C VB60100C UNIT RJC 2.5 2.5 C/W diode (2) IR Notes (1) Pulse test: 300 s pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER Typical thermal resistance per diode ORDERING INFORMATION PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB V60100C-E3/4W 1.89 4W 50/tube Tube TO-263AB VB60100C-E3/4W 1.38 4W 50/tube Tube TO-263AB VB60100C-E3/8W 1.38 8W 800/reel Tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 70 30 D = 0.8 60 D = 0.5 25 Average Power Loss (W) Average Forward Current (A) Resistive or Inductive Load 50 40 30 20 D = 0.3 20 D = 1.0 D = 0.2 15 D = 0.1 T 10 5 10 0 D = tp/T tp 0 0 25 50 75 100 125 150 175 0 5 10 15 20 25 30 35 Case Temperature (C) Average Forward Current (A) Figure 1. Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88942 Revision: 24-Jun-09 New Product V60100C & VB60100C Vishay General Semiconductor 10 000 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p TA = 150 C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TA = 125 C 10 TA = 100 C 1 TA = 25 C 0.1 1000 100 0 0.2 0.4 0.6 0.8 0.1 1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 10 100 Transient Thermal Impedance (C/W) Instantaneous Reverse Current (mA) 1000 TA = 150 C TA = 125 C 10 TA = 100 C 1 0.1 TA = 25 C 0.01 0.001 10 20 30 40 50 60 70 80 90 100 1 0.1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode Document Number: 88942 Revision: 24-Jun-09 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 New Product V60100C & VB60100C Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.635 (16.13) 0.625 (15.87) 3 0.160 (4.06) 0.140 (3.56) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.560 (14.22) 0.530 (13.46) 0.105 (2.67) 0.095 (2.41) 0.035 (0.90) 0.028 (0.70) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88942 Revision: 24-Jun-09 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000