KG series Power rocker switches Distinctive features and specifications Protected rocker Illuminated or non-illuminated VDE (EN 61058-1) approved Sealed to IP65 ELECTRICAL SPECIFICATIONS MATERIALS * Currrent/voltage rating : - functions 1 (ON-OFF) and 6 (ON-ON) : 15A 12VDC, 10A 24VDC, 15A 250VAC max., 10mA 14VDC min. - functions 4 ( ON ON ON) and 4-1R (ON ON MOM) : 8A 12VDC, 5A 24VDC, 8A 250VAC max. - other functions : 10A 12VDC, 8A 24VDC, 10A 250VAC max. * VDE approved ratings : 12(4)A 250VAC, T85/55C * Initial contact resistance : 10 m max. at 1A 2VDC * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals * Electrical life : 10.000 cycles min. * Mechanical life : 2 position models : 100.000 cycles min. 3 position models : 30.000 cycles min. ENVIRONMENTAL SPECIFICATIONS * Degree of protection : IP65 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d * Salt spray resistance : 96 hours according to IEC 512-6, test 11f * Operating temperature : 2 position models : -40C to + 85C 3 position models : -10C to + 65C * Case : thermoplastic UL94-V0 * Terminals : brass, silver plated * Contacts : silver grain * Contact roller : brass, nickel plated AGENCY APPROVAL EN 61058-1 Availability : double pole models, functions ON-OFF and ON-ON. Marking : to order switches marked VDE, add "VDE" at the end of model number. MATRIX MOUNTING 25.00 mini. (.984 min.) 4.00 (.157) 49.00 mini. (1.929 min.) 12.20 (.480) Dimensions : First dimensions are in mm while inches are shown as bracketed numbers. Tolerance : The general tolerance for dimensions in this brochure is 0,3 (.012). Overall dimension tolerance is 0,5 (.020). Packaging unit : 40 pieces Dimensions, specifications and data shown in this brochure are subject to change without notice. 26 www.apem.com APEM KG series Power rocker switches Case 21.08 (.830) PANEL CUT-OUT 36.80 (1.449) Panel thickness : 0,8 mm to 4,6 mm Recommended thickness : between 2 mm and 3,5 mm 3 2 1 CASE + LAMPS ROCKER LENS MARKING MODEL STRUCTURE OFF ON ON ON MOM ON ON OFF MOM OFF MOM OFF ON 10.50 (.413) 23.50 (.925) 20.00 (.787) 12.00 (.472) 48.50 (1.909) 43.70 (1.720) ON ON ON MOM ON MOM ON ON 6.85 (.269) KG35 KG36 KG37 KG38 KG39 Double pole KG41 KG44* KG44-1R* KG45 KG46 KG47 KG48 KG49 14.65 (.576) Single pole KG31 1-2 4-5 24.50 (.964) 2-3 5-6 11.00 (.433) Flat seal * Function 4 : single pole in double pole case TERMINALS Side A O3.00x0.50 SI (.118DIAx0.50 IS) o1.50 (.059DIA) O3.10 (.122DIA) 6.35 (.25) 0.80 (.031) 2 0 Screw 4.50 (.177) Terminals 1 to 6 are marked on the case. 6.35x0.80 (.250x.031) 6.35x0.80 (.25x.031) Solder lug / quick-connect 3 Side A : terminals 1 and 4 Side B : terminals 3 and 6 1 4 2 5 3 6 Quick-connect Side B CONTACT MATERIALS A APEM Silver grain Functions ON-OFF and ON-ON : 15A 12VDC , 10A 24VDC, 15A 250VAC max. - 10mA 14 VDC min. Other functions : 10A 12VDC, 8A 24VDC, 10A 250VAC max. www.apem.com 27 KG series Power rocker switches Lamps BEZEL Black, sealed to IP65 2 LAMPS Side A Side B Complete each enlarged box with one of the codes listed below. Side A X Without lamp J 24V LED red A 6V LED red K 24V LED green B 6V LED green L 24V LED yellow C 6V LED yellow M Neon 125V D 12V LED red N Neon 250V E 12V LED green O Filament 6V F 12V LED yellow P Filament 12V G 18V LED red R Filament 24V H 18V LED green S Fluorescent 220V I 18V LED yellow T Fluorescent 110V 4 1 4 1 4 1 4 1 5 2 5 2 5 2 5 2 6 3 6 3 6 3 6 3 Side B The lamp wiring diagram is shown on the case. LAMP WIRING 1 4 + 1 2 5 2 3 6 3 4 1 - 5 6 + 4 2 5 3 6 1 + 4 5 2 - + 1 - 6 3 - A (standard) 4 2 5 3 6 - + 1 4 2 + - + 5 2 6 3 1 B 1 4 5 3 6 1 4 - + 4 2 5 3 6 - C CKGRLA-B 1 Note : If not available, terminals are added to connect the LED. 2 + 3 1 4 5 6 - D - for function 1 (on-off) with LED on side A 4 2 5 3 6 - + 1 4 2 + - 3 - 5 2 5 6 3 6 1 4 2 + - 3 + 5 6 CKRRLF-A E F CKGRLD-B To order case only (without rocker), finish your order number with the lamp wiring code. 28 www.apem.com APEM KG series Power rocker switches Rocker - Lenses ROCKER COLOUR 1 Blue 5 Yellow Dark blue 6 Red 2 Black 7 Ivory 3 Green 9 Orange 4 Grey 1/4 ROCKER SHAPE 1 Full rocker 4 Opening on side A 6 Opening on side B 8 Opening on sides A and B Other rocker shapes on customer specifications : on request. To order rocker only (without case), begin the order number with code KGR, then follow the order format from "rocker colour" until the end of the options. LENS COLOUR Side A Side B Complete each enlarged box with one of the codes listed below. X No lens 1 Blue * 3 Green * 6 Red 9 Orange B White T Translucent Side A 4 1 4 1 5 2 5 2 6 3 6 3 Side B * Blue or green lens recommended with fluorescent lamp. To order lenses only, begin the order number with the codes : KGLA for lens A and KGLB for lens B, then follow the order format from "lens colour" until the end of the options. APEM www.apem.com 29 KG series Power rocker switches Marking If no marking required, leave all boxes blank. MARKING * * MARKING ORIENTATION Select one option from each of the tables below. 4 1 5 2 6 3 1 2 3 4 5 6 MARKING METHOD C Hot stamping V H SYMBOLS Other orientations : on request A B Available symbols : see page 31. Marking colour White marking for black rockers - Black marking for colour rockers Other : on request. Marking area For illuminated versions. The symbol will be included in the hatched area. 30 www.apem.com APEM