Europe: +49 / 7731 8399 0 | Email: info@meder.com USA: +1 / 508 295 0771 | Email: salesusa@meder.com Asia: +852 / 2955 1682 | Email: salesasia@meder.co Magnetic properties Pull in Drop out Test equipment Item No.: 2220711104 Item: MK02/0-1A66-1000W Conditions Min Typ Max Unit Max Unit at 20C at 20C SV 002 Special Product Data Contact - form Contact rating operating voltage operating ampere Switching current Sensor-resistance Housing material Case color Sealing compound Conditions Min Typ A - NO not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC measured with 40% overdrive Environmental data Conditions Operating temperature Operating temperature Storage temperature cable not moved cable moved Cable specification Conditions PBT glass fibre reinforced blue Polyurethan Min Typ Max Unit Min Typ Max Unit Max Unit Cable typ Cable material Cross section round cable PVC 0,25 gmm Conditions General data Mounting advice mounting advice 1 mounting advice 2 tightening torque Min Typ over 5m cable, a series resistor is recommended. Decreased switching distances by mounting on iron Magnetically conductive screws must not be used !" # $ Disk ISO 7089 % Modifications in the sense of technical progress are reserved Designed at: 17.08.06 Designed by: KSCHIELENSKI Approval at: 09.10.07 Approval by: BUELTZHOEFFER Last Change at: 17.03.08 Last Change by: ALICHTENSTEIN Approval at: 23.04.08 Approval by: BUELTZHOEFFER Version: 03