PROTECTIVE ENCAPSULANT 1206 Thin Film Chip Resistor WRAPAROUND TERMINATIONS Standard Grade, Wraparound PRECISION THIN FILM 99.6% ALUMINA PERFORMANCE CHARACTERISTICS 5.6W- 1.8MW 0.1%, 0.25%, 0.5%,1%, 2%, 5% 25, 50, 100 ppm 67.2C/W 300 mW 100 Volts CURRENT NOISE POWER DISSIPATION TEMPERATURE RISE (C) Resistance Range(1) Tolerances (2) TCR Thermal Resistance Maximum Power Maximum Voltage (1) Minimum resistance range at 0.1% tolerance is 100ohms. (2) +/- 0.05% limited availability - consult factory ENVIRONMENTAL PERFORMANCE (3) fiber epoxy board ceramic board POWER DISSIPATION (WATTS) 0.02% 0.02% 0.02% 0.02% 0.03% 0.03% See Chart Thermal Shock Low Temperature Operation Short-time Overload Resistance to Bonding Exposure Moisture Resistance High Temperature Exposure Life Test TYPICAL LIFE TEST PERFORMANCE POWER DERATING (3)Typical resistance change, test methods and criteria per MIL-PRF-55342. PART NUMBERING S 1206 C A 1001 F H B - TR PACKAGING CODE: - TR = Tape/Reel - W = Waffle Carrier (Default packaging is Bulk) TERMINATION FINISH: B: Sn60 over nickel barrier W: Gold TEMPERATURE CHARACTERISTIC TCR: E: 25 ppm H: 50 ppm K: 100 ppm TOLERANCE: B: 01% C: 0.25% D: 0.5% F: 1% G: 2% J: 5% RESISTANCE VALUE: Three or Four digits are used, with all leading digits significant. Four digits are used for 1% tolerance or lower; otherwise, three digits are used. The last digit specifies the number of zeros to add. The letter "R" is used to represent the decimal for fractional ohmic values. Example: 5R6 is 5.6 ohms. PRODUCT DESIGNATION: A: Thin film on alumina TERMINATION TYPE: C: Wraparound termination SIZE CODE GRADE: S: Standard Production H: High Reliability (For Screening options, contact the factory) MECHANICAL INCHES Length Width Thickness Top Term Bottom Term Gap Approx. Weight .126 (.124 - .132) .061 (.059 - .067) .017 (.013 - .023) .015 (.010 - .020) .021 (.015 - .025) .085 (.081 - .089) 0.0081 grams MILLIMETERS 3.20 1.55 0.38 0.38 0.53 2.15 .156 MINIMUM RECOMMENDED MOUNTING PADS (INCHES) (3.15 - 3.35) (1.50 - 1.70) (0.33 - 0.58) (0.25 - 0.50) (0.38 - 0.64) (2.05 - 2.25) .067 .079 .039 "Specifications subject to change without notice." STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-1797 Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401 www.resistor.com 02/08/08