AUIRGP4066D1 AUIRGP4066D1-E AUTOMOTIVE GRADE INSULATED GATE BIPOLAR TRANSISTOR WITH ULTRAFAST SOFT RECOVERY DIODE Features * Low VCE (ON) Trench IGBT Technology * Low switching losses * Maximum Junction temperature 175 C C VCES = 600V IC(Nominal) = 75A G * 5 S short circuit SOA * Square RBSOA * 100% of the parts tested for 4X rated current (ILM) * Positive VCE (ON) Temperature Coefficient * Soft Recovery Co-Pak Diode * Tight parameter distribution * * Lead-Free, RoHS Compliant Automotive Qualified * tSC 5s, TJ(max) = 175C E VCE(on) typ. = 1.70V n-channel C C E C G Benefits * High Efficiency in a wide range of applications G C TO-247AC AUIRGP4066D1 * Suitable for a wide range of switching frequencies due to Low V CE (ON) and Low Switching losses G G ate * Rugged transient Performance for increased reliability * Excellent Current sharing in parallel operation E TO-247AD AUIRGP4066D1-E C C ollector E Em itter * Low EMI Ordering Information Base part number Package Type AUIRGP4066D1 TO-247AC Standard Pack Form Tube AUIRGP4066D1-E TO-247AD Tube Complete Part Number Quantity 25 AUIRGP4066D1 25 AUIRGP4066D1-E Absolute Maximum Ratings Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in the specifications is not implied.Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Ambient temperature (TA) is 25C, unless otherwise specified. Parameter Max. Units V Continuous Collector Current 600 140 IC @ TC = 100C Continuous Collector Current 90 INOMINAL Nominal Current 75 ICM Pulse Collector Current VGE = 15V 225 ILM Clamped Inductive Load Current VGE = 20V IF NOMINAL Diode Nominal Current IFM Diode Maximum Forward Current VGE Continuous Gate-to-Emitter Voltage 20 Transient Gate-to-Emitter Voltage 30 PD @ TC = 25C Maximum Power Dissipation 454 PD @ TC = 100C Maximum Power Dissipation 227 TJ Operating Junction and TST G Storage Temperature Range VCES Collector-to-Emitter Voltage IC @ TC = 25C d g c 300 75 A g d 300 V W -55 to +175 C Soldering Temperature, for 10 sec. 300 (0.063 in. (1.6mm) from case) Mounting Torque, 6-32 or M3 Screw 10 lbf*in (1.1 N*m) Thermal Resistance Parameter Thermal Resistance Junction-to-Case-(each IGBT) Min. Typ. Max. Units --- --- 0.33 C/W --- --- 0.53 RJC (Diode) f Thermal Resistance Junction-to-Case-(each Diode)f RCS Thermal Resistance, Case-to-Sink (flat, greased surface) --- 0.24 --- RJA Thermal Resistance, Junction-to-Ambient (typical socket mount) --- 40 --- RJC (IGBT) *Qualification standards can be found at http://www.irf.com/ 1 www.irf.com (c) 2013 International Rectifier May 02, 2013 AUIRGP4066D1/AUIRGP4066D1-E Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameter V(BR)CES Collector-to-Emitter Breakdown Voltage V(B R)CES /T J T emperature Coeff. of Breakdown Voltage VCE(on) Collector-to-Emitter Saturation Voltage Min. Typ. Max. Units 600 -- -- V -- 0.30 -- V/C -- 1.70 2.1 -- 2.0 -- -- 2.1 -- VGE(th) Gate Threshold Voltage 4.0 -- 6.5 VGE(t h)/ T J Threshold Voltage temp. coefficient -- -13 -- Conditions VGE = 0V, IC = 200A f VGE = 0V, IC = 15mA (25C-175C) d d = 175Cd IC = 75A, VGE = 15V, TJ = 25C V IC = 75A, VGE = 15V, TJ = 150C IC = 75A, VGE = 15V, TJ V VCE = VGE, I C = 2.1mA mV/C VCE = VGE, I C = 20mA (25C - 175C) gfe Forward Transconductance -- 50 -- S VCE = 50V, IC = 75A, PW = 25s ICES Collector-to-Emitter Leakage Current -- 3.0 200 A VGE = 0V, VCE = 600V -- 10 -- mA VFM Diode Forward Voltage Drop -- 1.60 1.77 V -- 1.54 -- IGES Gate-to-Emitter Leakage Current -- -- 100 VGE = 0V, VCE = 600V, TJ = 175C IF = 75A IF = 75A, TJ = 175C nA VGE = 20V Switching Characteristics @ TJ = 25C (unless otherwise specified) Parameter Min. Typ. Max. -- 150 225 Qg Total Gate Charge (turn-on) Qge Gate-to-Emitter Charge (turn-on) -- 40 60 Qgc Gate-to-Collector Charge (turn-on) -- 60 90 Eon Turn-On Switching Loss -- 4240 5190 Eoff Turn-Off Switching Loss -- 2170 3060 Etotal Total Switching Loss -- 6410 8250 td(on) Turn-On delay time -- 50 70 tr Rise time -- 80 100 td(off) Turn-Off delay time -- 200 230 tf Fall time -- 60 80 Eon Turn-On Switching Loss -- 6210 -- Eoff Turn-Off Switching Loss -- 2815 -- Etotal Total Switching Loss -- 9025 -- td(on) Turn-On delay time -- 45 -- tr Rise time -- 70 -- td(off) Turn-Off delay time -- 240 -- tf Fall time -- 80 -- Cies Input Capacitance -- 4470 -- Coes Output Capacitance -- 350 -- Cres Reverse Transfer Capacitance -- 140 -- Units Conditions IC = 75A nC VGE = 15V VCC = 400V IC = 75A, VCC = 400V, VGE = 15V J RG = 10, L = 100H, TJ = 25C E nergy los s es include tail & diode revers e recovery IC = 75A, VCC = 400V, VGE = 15V ns RG = 10, L = 100H TJ = 25C IC = 75A, VCC = 400V, VGE=15V J RG=10, L=100H, TJ = 175C E nergy los s es include tail & diode revers e recovery IC = 75A, VCC = 400V, VGE=15V ns RG=10, L=100H TJ = 175C VGE = 0V pF VCC = 30V f = 1.0Mhz TJ = 175C, IC = 300A RBSOA Reverse Bias Safe Operating Area SCSOA Short Circuit Safe Operating Area Erec VCC = 480V, Vp 600V FULL SQUARE Rg = 10, VGE = +20V to 0V VCC = 400V, Vp 600V 5 -- -- s Reverse Recovery Energy of the Diode -- 680 -- J TJ = 175C trr Diode Reverse Recovery Time -- 240 -- ns VCC = 400V, IF = 75A Irr Peak Reverse Recovery Current -- 50 -- A VGE = 15V, Rg = 10, L =100H Rg = 10, VGE = +15V to 0V Notes: VCC = 80% (VCES), VGE = 20V, L = 100H, RG = 50, tested in production ILM 400A. Pulse width limited by max. junction temperature. Refer to AN-1086 for guidelines for measuring V(BR)CES safely. R is measured at TJ of approximately 90C. Calculated continuous current based on maximum allowable junction temperature. Package IGBT current limit is 120A. Package diode current limit is120A. Note that current limitations arising from heating of the device leads may occur. 2 www.irf.com (c) 2013 International Rectifier May 02, 2013 AUIRGP4066D1/AUIRGP4066D1-E 150 500 125 400 Ptot (W) IC (A) 100 75 50 300 200 100 25 0 25 50 75 100 125 150 0 175 25 50 75 125 150 175 T C (C) TC (C) Fig. 1 - Maximum DC Collector Current vs. Case Temperature Fig. 2 - Power Dissipation vs. Case Temperature 1000 1000 10sec 100 100 IC (A) 100sec IC (A) 100 1msec 10 DC 10 1 Tc = 25C Tj = 175C Single Pulse 0.1 1 1 10 100 1000 10 100 VCE (V) VCE (V) Fig. 3 - Forward SOA TC = 25C, TJ 175C; VGE =15V 300 250 250 VGE = 18V VGE = 15V VGE = 12V VGE = 10V VGE = 8.0V 150 150 100 100 50 50 0 0 0 2 4 6 8 10 VCE (V) Fig. 5 - Typ. IGBT Output Characteristics TJ = -40C; tp = 60s 3 VGE = 18V VGE = 15V VGE = 12V VGE = 10V VGE = 8.0V 200 ICE (A) ICE (A) Fig. 4 - Reverse Bias SOA TJ = 175C; VGE =20V 300 200 1000 www.irf.com (c) 2013 International Rectifier 0 2 4 6 8 10 VCE (V) Fig. 6 - Typ. IGBT Output Characteristics TJ = 25C; tp = 60s May 02, 2013 AUIRGP4066D1/AUIRGP4066D1-E 300 300 VGE = 18V VGE = 15V VGE = 12V VGE = 10V VGE = 8.0V 250 200 IF (A) ICE (A) 200 -40C 25C 175C 250 150 150 100 100 50 50 0 0 0 2 4 6 8 0.0 10 1.0 2.0 VCE (V) 20 20 18 18 16 16 14 14 ICE = 38A ICE = 75A 10 ICE = 150A 8 12 ICE = 38A ICE = 75A 10 ICE = 150A 8 6 6 4 4 2 2 0 0 5 10 15 20 5 10 VGE (V) 20 Fig. 10 - Typical VCE vs. VGE TJ = 25C 300 20 IC, Collector-to-Emitter Current (A) 18 16 14 VCE (V) 15 VGE (V) Fig. 9 - Typical VCE vs. VGE TJ = -40C 12 ICE = 38A ICE = 75A 10 8 ICE = 150A 6 4 2 250 T J = 25C T J = 175C 200 150 100 50 0 0 5 10 15 20 VGE (V) Fig. 11 - Typical VCE vs. VGE TJ = 175C 4 4.0 Fig. 8 - Typ. Diode Forward Characteristics tp = 60s VCE (V) VCE (V) Fig. 7 - Typ. IGBT Output Characteristics TJ = 175C; tp = 60s 12 3.0 VF (V) www.irf.com (c) 2013 International Rectifier 4 6 8 10 12 14 16 18 VGE, Gate-to-Emitter Voltage (V) Fig. 12 - Typ. Transfer Characteristics VCE = 50V; tp = 60s May 02, 2013 AUIRGP4066D1/AUIRGP4066D1-E 18000 1000 16000 tdOFF Swiching Time (ns) 14000 Energy (J) 12000 EON 10000 8000 6000 4000 tF 100 tR tdON EOFF 2000 0 10 0 25 50 75 100 125 150 0 50 100 150 IC (A) IC (A) Fig. 13 - Typ. Energy Loss vs. IC TJ = 175C; L = 100H; VCE = 400V, RG = 10; VGE = 15V Fig. 14 - Typ. Switching Time vs. IC TJ = 175C; L = 100H; VCE = 400V, RG = 10; VGE = 15V 10000 15000 13000 Swiching Time (ns) Energy (J) 11000 tdOFF 1000 EON 9000 7000 5000 tF 100 tR EOFF tdON 3000 10 1000 0 25 50 75 0 100 20 60 80 100 120 R G () Rg () Fig. 15 - Typ. Energy Loss vs. RG TJ = 175C; L = 100H; VCE = 400V, ICE = 75A; VGE = 15V Fig. 16 - Typ. Switching Time vs. RG TJ = 175C; L = 100H; VCE = 400V, ICE = 75A; VGE = 15V 55 60 55 RG = 10 50 RG = 22 50 45 45 RG = 47 IRR (A) IRR (A) 40 40 RG = 100 35 40 35 30 30 25 25 20 20 40 60 80 100 120 140 160 IF (A) Fig. 17 - Typ. Diode IRR vs. IF TJ = 175C 5 www.irf.com (c) 2013 International Rectifier 0 20 40 60 80 100 RG () Fig. 18 - Typ. Diode IRR vs. RG TJ = 175C May 02, 2013 AUIRGP4066D1/AUIRGP4066D1-E 55 18000 16000 150A 47 14000 22 12000 45 QRR (C) IRR (A) 50 10000 40 75A 100 8000 10 6000 35 38A 4000 2000 30 400 500 600 200 700 400 600 800 1000 diF /dt (A/s) diF /dt (A/s) Fig. 20 - Typ. Diode QRR vs. diF/dt VCC = 400V; VGE = 15V; TJ = 175C Fig. 19 - Typ. Diode IRR vs. diF/dt VCC = 400V; VGE = 15V; IF = 75A; TJ = 175C 800 20 3500 RG = 10 RG = 22 RG = 47 3000 600 Isc Time (s) 2000 10 400 5 200 Current (A) RG = 100 2500 Energy (J) Tsc 15 1500 1000 0 0 500 25 75 125 8 175 10 12 18 Fig. 22 - VGE vs. Short Circuit Time VCC = 400V; TC = 25C Fig. 21 - Typ. Diode ERR vs. IF TJ = 175C 16 10000 VGE, Gate-to-Emitter Voltage (V) Cies Capacitance (pF) 16 VGE (V) IF (A) 1000 Coes 100 Cres 10 VCES = 400V VCES = 300V 14 12 10 8 6 4 2 0 0 100 200 300 400 500 VCE (V) Fig. 23 - Typ. Capacitance vs. VCE VGE= 0V; f = 1MHz 6 14 www.irf.com (c) 2013 International Rectifier 0 20 40 60 80 100 120 140 160 Q G, Total Gate Charge (nC) Fig. 24 - Typical Gate Charge vs. VGE ICE = 75A; L = 485H May 02, 2013 AUIRGP4066D1/AUIRGP4066D1-E Thermal Response ( Z thJC ) 1 D = 0.50 0.1 0.20 0.10 0.05 0.01 0.02 0.01 J R1 R1 J 1 R3 R3 R4 R4 Ri (C/W) C 2 1 3 2 3 4 4 i (sec) 0.00738 0.000009 0.09441 0.000179 0.13424 0.002834 Ci= i/Ri Ci i/Ri SINGLE PULSE ( THERMAL RESPONSE ) 0.001 R2 R2 0.09294 0.0182 Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 0.0001 1E-006 1E-005 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig 25. Maximum Transient Thermal Impedance, Junction-to-Case (IGBT) Thermal Response ( Z thJC ) 10 1 D = 0.50 0.20 0.10 0.05 0.02 0.01 0.1 0.01 J R1 R1 J 1 R2 R2 R3 R3 C 1 2 2 3 3 Ci= i/Ri Ci i/Ri 0.001 1E-005 0.0001 0.001 4 4 i (sec) 0.012 0.000034 0.163 0.000390 0.215 0.005990 0.139 0.033585 Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc SINGLE PULSE ( THERMAL RESPONSE ) 0.0001 1E-006 Ri (C/W) R4 R4 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig. 26. Maximum Transient Thermal Impedance, Junction-to-Case (DIODE) 7 www.irf.com (c) 2013 International Rectifier May 02, 2013 AUIRGP4066D1/AUIRGP4066D1-E L L VC C D UT 0 80 V DU T 4 80V Rg 1K Fig.C.T.1 - Gate Charge Circuit (turn-off) Fig.C.T.2 - RBSOA Circuit d io d e clamp / DU T 4x DC L - 5V 360V DU T / D RIVER DUT VCC Rg Fig.C.T.3 - S.C. SOA Circuit R= Fig.C.T.4 - Switching Loss Circuit VCC ICM C force 400H D1 10K C sense DUT VCC G force DUT 0.0075 Rg E sense E force Fig.C.T.5 - Resistive Load Circuit 8 www.irf.com (c) 2013 International Rectifier Fig.C.T.6 - BVCES Filter Circuit May 02, 2013 AUIRGP4066D1/AUIRGP4066D1-E 700 500 400 80 400 300 60 200 40 10% ICE 300 60 40 10% ICE 100 20 0 0 0 Eon Loss Eof f Loss -100 -0.4 -100 -0.4 -20 -0.2 0 0.2 0.4 0.6 -20 -0.2 QRR t RR 0.4 0.6 700 700 600 600 500 500 VCE 400 Peak IRR 300 400 300 ICE 200 200 100 100 0 0 -100 0.00 0.20 0.40 0.60 0.80 time (S) Fig. WF3 - Typ. Diode Recovery Waveform @ TJ = 175C using Fig. CT.4 9 0.2 Fig. WF2 - Typ. Turn-on Loss Waveform @ TJ = 175C using Fig. CT.4 Vce (V) VF (V) Fig. WF1 - Typ. Turn-off Loss Waveform @ TJ = 175C using Fig. CT.4 -0.20 0 time (s) time(s) 90 80 70 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 80 90% ICE 200 20 0 100 www.irf.com (c) 2013 International Rectifier Ice (A) 100 120 TEST CURRENT I CE (A) 100 90% ICE VCE (V) 600 ICE (A) 120 500 140 tr tf 600 VCE (V) 700 140 -100 -3 0 3 6 9 12 Time (uS) Fig. WF4 - Typ. S.C. Waveform @ TJ = 25C using Fig. CT.3 May 02, 2013 AUIRGP4066D1/AUIRGP4066D1-E TO-247AC Package Outline Dimensions are shown in millimeters (inches) TO-247AC Part Marking Information Part Number AUP4066D1 YWWA IR Logo XX or Date Code Y= Year WW= Work Week A= Automotive, Lead Free XX Lot Code TO-247AC package is not recommended for Surface Mount Application. Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ 10 www.irf.com (c) 2013 International Rectifier May 02, 2013 AUIRGP4066D1/AUIRGP4066D1-E TO-247AD Package Outline Dimensions are shown in millimeters (inches) TO-247AD Part Marking Information Part Number AUP4066D1-E YWWA IR Logo XX or Date Code Y= Year WW= Work Week A= Automotive, Lead Free XX Lot Code TO-247AD package is not recommended for Surface Mount Application. Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ 11 www.irf.com (c) 2013 International Rectifier May 02, 2013 AUIRGP4066D1/AUIRGP4066D1-E Qualification Information Automotive (per AEC-Q101) Qualification Level Comments: This part number(s) passed Automotive qualification. IR's Industrial and Consumer qualification level is granted by extension of the higher Automotive level. Moisture Sensitivity Level TO-247AC N/A TO-247AD ESD Machine Model Class M4 (+/-425V) AEC-Q101-002 Human Body Model Class H2 (+/-4000V) AEC-Q101-001 Charged Device Model Class C5 (+/-1125V) AEC-Q101-005 Yes RoHS Compliant Qualification standards can be found at International Rectifier's web site: http//www.irf.com/ Highest passing voltage 12 www.irf.com (c) 2013 International Rectifier May 02, 2013 AUIRGP4066D1/AUIRGP4066D1-E IMPORTANT NOTICE Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the "AU" prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR's terms and conditions of sale supplied at the time of order acknowledgment. IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR's standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards. Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements. IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product. Only products certified as military grade by the Defense Logistics Agency (DLA) of the US Department of Defense, are designed and manufactured to meet DLA military specifications required by certain military, aerospace or other applications. Buyers acknowledge and agree that any use of IR products not certified by DLA as military-grade, in applications requiring military grade products, is solely at the Buyer's own risk and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation "AU". Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements. For technical support, please contact IR's Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 101 N. Sepulveda Blvd., El Segundo, California 90245 Tel: (310) 252-7105 13 www.irf.com (c) 2013 International Rectifier May 02, 2013