MBR350, MBR360 MBR360 is a Preferred Device Axial Lead Rectifiers These devices employ the Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features epitaxial construction with oxide passivation and metal overlap contact. Ideally suited for use as rectifiers in low-voltage, high-frequency inverters, free wheeling diodes, and polarity protection diodes. http://onsemi.com Features * * * * * SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES 50, 60 VOLTS Extremely Low vF Low Power Loss/High Efficiency Highly Stable Oxide Passivated Junction Low Stored Charge, Majority Carrier Conduction Pb-Free Packages are Available* Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 1.1 Gram (Approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260C Max. for 10 Seconds Polarity: Cathode indicated by Polarity Band AXIAL LEAD CASE 267-05 (DO-201AD) STYLE 1 MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Symbol MBR350 MBR360 VRRM VRWM VR Max Unit V Average Rectified Forward Current TA = 65C (RqJA = 28C/W, P.C. Board Mounting) IO 3.0 A Non-Repetitive Peak Surge Current (Note 1) (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz, TL = 75C) IFSM 80 A Operating and Storage Junction Temperature Range (Reverse Voltage Applied) TJ, Tstg -65 to +150 C 28 C/W THERMAL CHARACTERISTICS Thermal Resistance, Junction-to-Ambient (see Note 4 - Mounting Data, Mounting Method 3) RqJA MARKING DIAGRAM 50 60 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Lead Temperature reference is cathode lead 1/32 in from case. A MBR 3x0G G A x G (Note: = Assembly Location = 5 or 6 = Pb-Free Package Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. Preferred devices are recommended choices for future use and best overall value. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2006 June, 2006 - Rev. 6 1 Publication Order Number: MBR350/D MBR350, MBR360 ELECTRICAL CHARACTERISTICS (TL = 25C unless otherwise noted) (Note 2) Characteristic Symbol Maximum Instantaneous Forward Voltage (Note 3) (iF = 1.0 Amp) (iF = 3.0 Amp) (iF = 9.4 Amp) vF Maximum Instantaneous Reverse Current @ Rated DC Voltage (Note 3) TL = 25C TL = 100C iR Max Unit V 0.600 0.740 1.080 mA 0.60 20 2. Lead Temperature reference is cathode lead 1/32 in from case. 3. Pulse Test: Pulse Width = 300 ms, Duty Cycle = 2.0%. 20 75C 20 10 25C I , REVERSE CURRENT (mA) R TJ = 100C 10 7.0 3.0 2.0 100C 75C 0.20 0.10 0.05 *The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 0.02 0.01 0.005 25C 0.002 1.0 0 10 0.7 20 30 40 50 VR REVERSE VOLTAGE (VOLTS) 60 80 Figure 2. Typical Reverse Current* , AVERAGE FORWARD CURRENT (AMPS) 0.5 0.3 0.2 0.1 0.07 0.05 5.0 RATED VR RqJA = 28C/W 4.0 DC 3.0 SQUARE WAVE 2.0 1.0 TJ = 150C F (AV) 0.03 0.02 I i , INSTANTANEOUS FORWARD CURRENT (AMPS) F 5.0 TJ = 150C 5.0 2.0 1.0 0.50 0 0.2 0.6 0.8 0.4 1.0 vF, INSTANTANEOUS VOLTAGE (VOLTS) 1.2 1.4 0 0 20 40 60 80 100 120 TA, AMBIENT TEMPERATURE (C) 140 Figure 3. Current Derating Ambient (Mounting Method 3 per Note 4) Figure 1. Typical Forward Voltage http://onsemi.com 2 160 5.0 300 4.0 200 TJ = 150C 3.0 C, CAPACITANCE (pF) P , AVERAGE POWER DISSIPATION (WATTS) F (AV) MBR350, MBR360 SQUARE WAVE 2.0 dc TJ = 25C 100 70 50 1.0 40 0 30 0 1.0 2.0 3.0 4.0 IF (AV), AVERAGE FORWARD CURRENT (AMPS) 5.0 0 10 Figure 4. Power Dissipation 20 30 40 VR, REVERSE VOLTAGE (VOLTS) 50 Figure 5. Typical Capacitance NOTE 4 -- MOUNTING DATA Data shown for thermal resistance, junction-to-ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering, or in case the tie point temperature cannot be measured. TYPICAL VALUES FOR RqJA IN STILL AIR Lead Length, L (in) Mounting Method 1/8 1/4 1/2 3/4 RqJA 1 50 51 53 55 C/W 2 58 59 61 63 C/W 3 Mounting Method 1 C/W 28 Mounting Method 2 Mounting Method 3 EE EEEEEEEEEEE EE EEEEEEEEEE EE EEEEEEEEEE EE EE EE EE P.C. Board where available copper surface is small. L L Vector Push-In Terminals T-28 L P.C. Board with 2-1/2 in X 2-1/2 in copper surface. L L = 1/2'' Board Ground Plane ORDERING INFORMATION Package Shipping MBR350RL Axial Lead 1500 Units / Tape & Reel MBR350RLG Axial Lead (Pb-Free) 1500 Units / Tape & Reel MBR360 Axial Lead 500 Units / Bag MBR360G Axial Lead (Pb-Free) 500 Units / Bag MBR360RL Axial Lead 1500 Units / Tape & Reel MBR360RLG Axial Lead (Pb-Free) 1500 Units / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 3 MBR350, MBR360 PACKAGE DIMENSIONS AXIAL LEAD CASE 267-05 (DO-201AD) ISSUE G K D A 1 2 B K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B D K INCHES MIN MAX 0.287 0.374 0.189 0.209 0.047 0.051 1.000 --- MILLIMETERS MIN MAX 7.30 9.50 4.80 5.30 1.20 1.30 25.40 --- STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MBR350/D