Description
The 3G Mobile Kit includes the 3G/GPRS shield that will allow you to connect to high speed cellular networks. Design all the applications you can imagine with the products
included from the starter kit: a Servo motor, an LDR, push buttons a piezo speaker and more. Following our tutorials for the 3G Mobile kit you will be making calls, uploading
data to a web server, sending photos via e-mail and storign data in a personal FTP logbook.
The 3G Mobile Kit includes
1x 3G/GPRS SHIELD FOR ARDUINO, RASPBERRY PI AND INTEL GALILEO
1x THIN SPEAKER
1x INTERNAL SPEAKER FOR 3G SHIELD (GSM/GPRS/3G)
1x ELECTRET MICROPHONE
1x ANTENA GPRS-GSM INTERNA
1x SIM5215E
1x Starter Kit
1x Starter Kit Box
1x "Starter Kit" Sticker
1x Arduino Jumper Cables
1x Breadboard clear
20x Resistor 1/4W 5% 220 ohm
10x Resistor 1/4W 5% 100 ohm
10x Resistor 1/4W 5% 10 K
10x Resistor 1/4W 5% 4,7 K
10x Resistor 1/4W 5% 1 M
2x Potentiometer 10K
4x Push Button 12x12 B3F-4150
1x Temperature Sensor (MCP9700)
10x 5mm Red Led
10x 5mm Green Led
1x 9v To Barrel Jack Adapter
1x LDR Sensor
4x Sugus
1x Piezo Speaker (ref.10066)
1x 5mm Triple Output Led RGB (Common Anode)
1x 9G Micro Servo
1x Hobby Motor
1x LCD 16*2 Characters - Green Yellow back light
1x Transistor BC547CG
Note: This 3G module does not have a GPS receiver.
Related Tutorials
3G/GPRS shield over Arduino and Raspberry Pi
Geolocation Tracking, Internet of Things, Long Range Networks