POWER COMPONENTS * Kitchen Equipment > Suitable for General Purpose AC Switching > Alternistor/No Snubber Versions for Inductive Loads > Logic Level Available for use with Microcontrollers and Low Level Devices > IGT Range 10-50 mA (Q1) * Power Tools > VDRM/VRMM 400, 600, 800, 1000V Applications * Phase Control * Static Switching * Light Dimming * Motor Speed Control * Solenoid Valve Controls: * Dishwasher * Washing Machines Absolute Maximum Ratings Tc = 100C Tc = 85C RMS On-State Current (full sine wave) Non Repetitive Surge Peak On-State Current (Full Cycle, Tj Initial = 25C) I2 t Value for fusing CTA/CTB16 16Amp - 400/600/800/1000V - TRIAC CONDITIONS SYMBOL RATING TO-220AB TO-220AB Iso IT(RMS) 16A F =50 Hz F =60 Hz ITSM 160A 168A tp = 10 ms I2 t 144A2s di/dt 100A/s Critical rate of rise of on-state current IG=2 x IGT, tr<100ns, Tj = 125C IGM 4A Average Gate Power Dissipation @ Tj = 125C PG(AV) 1W Storage Temperature Range Tstg -40 to +150C Tj -40 to +125C VISO 2500 VRMS Peak Gate Current @ Tj = 125C A1 A2 G tp = 20 s Operating Junction Temperature Range TO-220AB Isolated (CTA16) Isolation Voltage (CTA Series only) A2 Electrical Characteristics ALTERNISTOR/NO SNUBBER AND LOGIC LEVEL (3 Quadrants) IGT MAX @ VD =12 V, RL = 30 NOTE 1 A1 A2 QI-II-III VGT MAX @ VD =12 V, RL = 30 G VGD MIN @ VD =VDRM, RL = 3.3k TO-220AB Non-Isolated (CTB16) A2 G Tj = 125C SW CW BW 10mA 35mA 50mA QI-II-III 1.3V 1.3V 1.3V QI-II-III 0.2V 0.2V 0.2V 50mA IH MAX @ IT = 500 mA NOTE 2 15mA 35mA IL MAX @ IG = 1.2 IGT QI-III 25mA 50mA 70mA IL MAX @ IG = 1.2 IGT Q-II 30mA 60mA 80mA dv/dt MIN @ VD = 67%VDRM (gate open) NOTE 2 Tj = 125C 40V/s 500V/s 1000V/s (dv/dt)c MIN @ (dv/dt)c = 0.1 V/ms NOTE 2 Tj = 125C 8.5A/ms (dv/dt)c MIN @ (dv/dt)c = 10 V/ms NOTE 2 Tj = 125C 3.0A/ms (di/dt)c MIN without Snubber NOTE 2 Tj = 125C 8.5A/ms 14A/ms A1 STANDARD (4 Quadrants) C B QI-II-III 25mA 50mA IGT MAX @ VD =12 V, RL = 30 NOTE 1 QIV 50mA VGT MAX @ VD =12 V, RL = 30 Q-All IGT MAX @ VD =12 V, RL = 30 NOTE 1 VGD MIN @ VD =VDRM, RL = 3.3k Tj = 125C Q-All IH MAX @ IT = 500 mA NOTE 2 0.2V 25mA 50mA IL MAX @ IG = 1.2 IGT QI-III-IV 40mA 50mA IL MAX @ IG = 1.2 IGT Q-II 80mA 100mA 200V/s 400V/s 5V/s 10V/s dv/dt MIN @ VD = 67%VDRM (gate open) NOTE 2 Tj = 125C (dv/dt)c MIN @ (di/dt)c = 7.0 A/ms NOTE 2 ISO9001 Certified 100mA 1.3V Tj = 125C GENERAL NOTES 1. Minimum IGT is guaranted at 5% of IGT max. 2. For both polarities of A2 referenced to A1 3. All parameters at 25 degrees C unless otherwise specified. CTA/CTB16 16Amp - 400/600/800/1000V - TRIAC Part Number Selection Static Characteristics VT MAX @ ITM = 22.5 A, tp = 380s NOTE 2 Tj = 25C 1.55V Part Number Vto MAX @ Threshold Voltage NOTE 2 Tj = 125C 0.85V CTA/CTB16-xxxB Rd MAX @ Dynamic Resistance NOTE 2 Tj = 125C 25m IDRM MAX @ VDRM = VRRM Tj = 25C IRRM MAX @ VDRM = VRRM Tj = 125C Thermal Resistances Junction to Case (AC) TO-220AB Junction to Case (AC) TO-220AB Isolated Junction to Ambient TO-220AB Junction to Ambient TO-220AB Isolated D 5A 2mA SYMBOL RATING Rth(j-c) Rth(j-c) 1.2C/W 2.1C/W Rth(j-a) Rth(j-a) 60C/W 60C/W Voltage [Vpk] IGT [mA] Type Package 400, 600, 800, 1000 50mA Standard TO-220AB CTA/CTB16-xxxBW 400, 600, 800, 1000 50mA CTA/CTB16-xxxC 400, 600, 800, 1000 25mA CTA/CTB16-xxxCW 400, 600, 800, 1000 35mA CTA/CTB16-xxxSW 400, 600, 800, 1000 10mA SERIES CT N Isolation Type A: Isolated B: Non-Isolated A Maximum Blocking Voltage 400: 400Vpk 600: 600Vpk 800: 800Vpk 1000: 1000Vpk M O 20 18 18 16 16 C Q IT(RMS) [A] P [W] E 12 10 8 H 6 J Weight: 2.3g (0.08 oz) 13.79 10.36 0.94 1.32 4.83 0.61 2.84 2.69 6.88 3.89 16.51 2.9 1.55 1.55 0.503 0.392 0.027 0.048 0.182 0.018 0.098 0.094 0.255 0.149 0.61 0.102 0.039 0.039 Max. 0.62 0.127 2.67 0.63 0.543 0.408 0.037 0.052 0.19 0.024 0.112 0.106 0.271 0.153 0.65 0.114 0.061 0.061 Non-Isolated 6 2 Isolated 0 2 4 6 8 10 12 14 16 80 18 90 100 110 120 IT(RMS) [A] TC [C] Fig. 1: Power dissipation versus RMS on-state current (full cycle). Fig. 2: RMS on-state current versus case temperature (full cycle) 130 250 1000.0 100.0 I T M [A ] 3.23 Typ. 8 2 I T SM [A ] Min. 0.6 10 4 0 Inches Max. 15.75 12 4 0 Dimensions 16 Packaging Blank: Bulk PT: Plastic Tube 14 14 12.78 9.96 0.69 1.22 4.62 0.46 2.49 2.39 6.48 3.78 15.49 2.59 0.99 0.99 TO-220AB I B P Typ. Logic Level CW 16 K L Min. 15.24 TO-220AB Type B: Standard (IGT =50mA) BW: Alternistor/No Snubber (IGT =50mA) C: Standard (IGT =25mA) CW: Alternistor/No Snubber (IGT =35mA) SW: Logic Level (IGT =10mA) Rated Current 16: 16 Amp G Millimeters Standard Alternistor/No Snubber TO-220AB Part Number Designation F REF. A B C D E F G H I J K L M N O P Q Alternistor/No Snubber TO-220AB 10.0 160 120 100 80 60 50 40 30 Non-Repetitive Tj initial = 25C 20 1.0 0.5 10 1 1.5 2 2.5 3 3.5 4 4.5 5 1 10 100 VTM [V] Number of Cycles Fig. 3: On-state current versus on-state voltage (instantaneous values) Fig. 4: Non-repetitive surge peak on-state current versus number of cycles. 1000 0.105 ISO9001 Certified Approvals UL Recognized Component - E72445 (For CTA series) USA Sales Support (877) 502-5500 Tech Support (877) 702-7700 Fax (619) 710-8540 Email: sales@crydom.com Crydom Corp 2320 Paseo de las Americas, Suite 201 San Diego, CA 92154 EUROPE - UK Telephone +44 (0) 1202 365070 Fax +44 (0) 1202 365090 Email: intsales@crydom.com Crydom International Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE ASIA - Thailand Telephone +66 (0)2 665 2517 Fax +66 (0)2 665 2588 Crydom Asia 18/8 Fico Place 12th Floor Soi Sukhumvit 21 (Asoke) Klongtoey Nua, Wattana Bangkok, Thailand 10110 Germany Telephone +49 (0) 180 3000 506 (c) 2005 Crydom Corp, All Rights Reserved. Specifications are subject to change without prior notice. Crydom and the Crydom logo are trademarks of Crydom Corp. CrydomCTA16_L0205.pdf