RFBPF3225150A5-T - Walsin Technology

Walsin Technology Corporation

Page 1 of 7 AS_2.4GHz 3225BPF_A3_03 JULY-2002

RFBPF Series – 3225(1210)

MULTILAYER CERAMIC BAND PASS FILTER

2.4 GHz ISM Band Working Frequency

P/N: RFBPF3225150A3T

Customer :

Approval No :

Issue Date :

Customer Approval :

WALSIN Technology Corp.

Authorised By :

Walsin Technology Corporation

Page 2 of 7 AS_2.4GHz 3225BPF_A3_03 JULY-2002

FEATURES

1. Multilayer LTCC ( Low Temperature Cofired Ceramics ) Technology

2. Reflow solderable

3. Miniatured Size 3.2 x 2.5 x 1.5 mm3

4. Low Insertion Loss

5. High attenuation on 2nd harmonic suppressed

6. Suitable for 2.45 GHz Working Frequency Operation

APPLICATIONS

1. 2.4GHz ISM Band RF Application

2. Bluetooth, Wireless LAN, HomeRF

CONSTRUCTION

Fig 1. Outline of 2.4GHz Band Pass Filter

DESCRIPTION

Walsin Technology Corporation develops a new ceramic Band Pass Filter specified for 2.4 GHz ISM Band application, as

shown in fig-1. Both of Wireless LAN IEEE 802.11b, and BluetoothTM typically located on this unlicensed frequency band

which range covers from 2.4GHz to 2.4835GHz. To fulfil the in-band and out-band frequency requirements, this Band

Pass Filter has been designed to a high suppression on 2nd harmonic as well as low insertion loss characteristics

through Walsin’s advanced LTCC (Low Temperature Co-fired Ceramic) technology and superior product design via 3D

EM Simulation Skill.

This Band Pass Filter has a rectangular ceramic body with a tiny dimension of 3.2 x 2.5 x 1.5 mm3 future meet the SMT

automation and miniaturization requirements on modern portable devices.

DIMENSIONS

Figure Symbol Dimension

L 3.20 ± 0.20 mm

W 2.50 ± 0.20 mm

T 1.50 ± 0.10 mm

A 0.40 ± 0.20 mm

B 0.70 ± 0.20 mm

C 0.60 ± 0.20 mm

D 0.20 ± 0.15 mm

Walsin Technology Corporation

Page 3 of 7 AS_2.4GHz 3225BPF_A3_03 JULY-2002

SOLDER LAND PATTERN

Figure Symbol Dimension (mm)

L 3.40 ± 0.10

A 1.50 ± 0.10

B 1.20 ± 0.10

L1 2.80 ± 0.10

A1 0.30 ± 0.10

B1 0.90 ± 0.10

W1 0.60 ± 0.10

W2 0.50 ± 0.10

Line width to be design to match 50

Ω

characteristic

impedance, depending on PCB material and thickness Φ 0.40 ± 0.10

ELECTRICAL CHARACTERISTICS

n RFBPF3225150A3T Series

Item Specification

Frequency range (MHz) 2450 ± 50 MHz

Insertion Loss 2.5 dB (max)

VSWR 1.7

Ripple 0.6 dB

Attenuation (min.)

40 dB @ 1500 MHz ~ 1550 MHz

45 dB @ 1800 MHz ~ 1900 MHz

30 dB @ 2100 MHz

15 dB @ 2200 MHz

30 dB @ 4800 ~ 5000 MHz

*Note1: Rated power 5W MAX *Note2: Maximum Input power: 10W for 5 minutes

I/O Solder Pad Ground Solder Pad Ground Via

I/O Solder Pad Ground Solder Pad Ground ViaI/O Solder PadI/O Solder Pad Ground Solder PadGround Solder Pad Ground ViaGround Via

Walsin Technology Corporation

Page 4 of 7 AS_2.4GHz 3225BPF_A3_03 JULY-2002

Typical Electrical Chart:

Walsin Technology Corporation

Page 5 of 7 AS_2.4GHz 3225BPF_A3_03 JULY-2002

RELIABILITY TEST

n Mechanical performance

Test item Test condition / Test method Specification

Solderability Solder temp. : 235 ± 5°C

Immersion time: 2 ± 1 sec

Solder: SN63

At least 95% of a surface of

each terminal electrode must

be covered by fresh solder.

Resistance to soldering heat Solder: Sn63

Preheating temperature: 150 ± 10°C

Solder Temperature: 260 ± 5°C

Immersion time: 10 ± 1 sec

Measurement to be made after keeping at room

temp. for 24±2 hrs.

No mechanical damage.

Ceramic surface shall not be

exposed in the middle of the

termination or on the

terminated product edge by

leaching.

Drop Test Height : 75 cm

Direction : 3 directions

Times : 3 times for each direction.

No mechanical damage.

Samples shall satisfy

electrical specification after

test.

n Environmental characteristics

Test item Test condition / Test method Specification

Humidity (steady conditions) Humidity:90% to 95% R.H.

Tempertaure:40±2°C

Time: 500±24 hours.

Measurement: After placing for 24 hours Minimum.

No mechanical damage.

Samples shall satisfy electrical

specification after test.

Temperature cycle 1. 30±3 minutes at -40°C±3°C,

2. 10~15 minutes at room temperature,

3. 30±3 minutes at +85°±3°C,

4. 10~15 minutes at room temperature,

Total 100 continuous cycles

Measurement after placing for 48±2 hrs min.

No mechanical damage.

Samples shall satisfy

electrical specification after

test.

High temperature Temperature: 85°C±2°C

Test duration: 24 hours

Measurement must be taken after subjection to the

above conditions, followed by exposure in room

environment for 1 to 2 hours.

No mechanical damage.

Samples shall satisfy electrical

specification after test.

Low temperature Temperature: -40°C±3°C

Test duration: 24 hours

Measurement must be taken after subjection to the

above conditions, followed by exposure in room

environment for 1 to 2 hours.

No mechanical damage.

Samples shall satisfy electrical

specification after test.

Walsin Technology Corporation

Page 6 of 7 AS_2.4GHz 3225BPF_A3_03 JULY-2002

SOLDERING CONDITION

Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 2,

Fig 2. Infrared soldering profile

ORDERING CODE

BPF 322515

A 3 -

Walsin

device

Product

Code

BPF : Band

Pass Filter

Dimension code

Per 2 digits of

Length, Width,

Thickness :

e.g. :

322515 = Length

32, Width 25,

Thickness 15

Unit of

dimension

0 : 0.1 mm

1 : 1.0 mm

Application

A : 2.4GHZ ISM

Band

B : GSM 900/1800

Dual Band

C : GSM 900

D : GSM 1800

E : GPS

F : W-CDMA

G : PHS

Specification

Code from 0 ~ 9

dependent on

different electrical

specification

Packing

T : 7” Reeled

G : 10” Reeled

B : Bulk

X : SFC product

PACKAGING

ΦD

Walsin Technology Corporation

Page 7 of 7 AS_2.4GHz 3225BPF_A3_03 JULY-2002

Plastic Tape specifications (unit :mm)

Index Ao Bo ΦD T W

Dimension (mm) 2.85 ± 0.10 3.36 ± 0.10 1.55 ± 0.10 1.9 ± 0.10 8.0 ± 0.30

Index E F Po P1 P2

Dimension (mm) 1.75 ± 0.10 3.50 ± 0.05 4.00 ± 0.10 8.00 ± 0.10 2.00 ± 0.10

Reel dimensions (in mm)

Taping Quantity: 2000 pieces per 7” reel

CAUTION OF HANDLING

Limitation of Applications

Please contact us before using our products for the applications listed below which require especially high reliability

for the prevention of defects, which might directly cause damage to the third party’s life, body or property.

(1) Aircraft equipment

(2) Aerospace equipment

(3) Undersea equipment

(4) Medical equipment

(5) Disaster prevention / crime prevention equipment

(6) Traffic signal equipment

(7) Transportation equipment (vehicles, trains, ships, etc.)

(8) Applications of similar complexity and /or reliability requirements to the applications listed in the

above.

Storage condition

(1) Products should be used in 6 months from the day of WALSIN outgoing inspection, which can be

confirmed.

(2) Storage environment condition.

n Products should be storage in the warehouse on the following conditions.

n Temperature : -10 to +40°C

n Humidity : 30 to 70% relative humidity

n Don’t keep products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of

electrode, resulting in poor solderability.

n Products should be storage on the palette for the prevention of the influence from humidity, dust and son

on.

n Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on.

n Products should be storage under the airtight packaged condition.

Index A B C D

7” Reel Φ178 Φ60.0 Φ13.5 10.0±1.0