GBP406 thru GBP410 REVERSE VOLTAGE - 600 to 1000 Volts FORWARD CURRENT - 4.0 Ampere GLASS PASSIVATED BRIDGE RECTIFIERS FEATURES GBP * Rating to 1000V PRV * Ideal for printed circuit board * Reliable low cost construction utilizing molded plastic Dim. A B C D E F G H I J O P GBP Min. 14.2 2.9 10.1 13.8 1.8 6.65 3.71 0.4 1.20 0.64 1.8 3.1 Max. 14.7 3.3 10.7 14.4 2.2 7.25 3.91 0.6 1.40 0.84 2.4 3.3 All Dimensions in millimeter technique * The plastic material has UL flammability classification 94-0 * UL recognized file#E95060 MECHANICAL DATA * Case Material: "Green" molding compound, UL flammability classification 94V-0, (No Br. Sb. CI) * Polarity indicator: As marked on body * Weight: 1.33 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. PARAMETER SYMBOL GBP406 GBP408 GBP410 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 600 800 1000 V Maximum RMS Voltage VRMS 420 560 700 V Maximum DC Blocking Voltage VDC 600 800 1000 V Maximum Average Forward Rectified Current I(AV) 4.0 2.1 A IFSM 135 120 A IFSM 330 300 A VF 1.0 V IR 5 500 uA 76 A S with Heat-sink @TC=90 without Heat-sink @TA = 25 Peak Forward Surge Current @ Tj = 25 8.3ms single half sine-wave @ TJ = 125 Peak Forward Surge Current @ Tj = 25 1.0ms single half sine-wave @ TJ = 125 Maximum Forward Voltage at 2.0A DC Maximum DC Reverse Current @ TJ = 25 at Rated DC Blocking Voltage @ TJ = 125 I 2 t Rating for fusing (3mst 8.3) I 2 t 2 Typical Junction Capacitance (Note 1) CJ 40 pF Typical Thermal Capacitance (Note 2) RJC 7.5 C/W TJ, TSTG -55 to +150 C Operating and Storage Temperature Range Note : (1) (2) Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Device mounted on 50mm x 50mm x 2.0mm Cu Plate Heatsink REV. 8, Feb-2012, KBDG07 RATING AND CHARACTERISTIC CURVES GBP406 thru GBP410 FIG.1- FORWARD CURRENT DERAT ING CURVE FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT 135 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 5 4 3 With heatsink_50*50*2 mm copper plate, Rth JC=7.5/W 2 1 Without heatsink, Rth JC=10/W 120 105 90 75 60 45 30 Pulse width 8.3ms Single Half Sine-Wave 15 0 0 0 25 50 75 100 125 1 150 10 O FIG.3- TYPICAL FORWORD CHARACTERISTICS FIG.4- TYPICAL JUNCTION CAPACITANCE 100 CAPACI TANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) 100 10 Tj=150C Tj=125C 1 Tj=25C Tj=25C, f=1MHz, Level=1V 0.1 10 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1 10 INSTANTANEOUS FORWARD VOLTAG E, (V) 100 REVERSE VOLTAGE, (V) FIG .6 _NON- RE PETITIVE S URGE CURRE NT FIG.5- TY PICAL REVERSE CHARACTERISTICS 1000 1000 Tj=150C PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) 100 NUMBER OF CYCLES AT 60Hz CASE TEMPERATURE, ( C) 100 Tj=125C 10 Tj=100C Tj=75C Tj=50C 1 Tj=25C 0.1 0 200 400 600 800 1000 PERCENT OF RATED PEAK REVERSE VOLT AGE, (V) Tj=25C 100 Tj=125C _____ Sine Wave Square Wave - - - - - - 1200 10 1 10 tp, (m s) RATING AND CHARACTERISTIC CURVES GBP406 thru GBP410 Fig.7 - Admissible Repetitive Peak Forward Current vs. Pulse Duration 100 IFRM(A) V=0.1 10 V=0.2 V=0.5 1 0.1 0.0001 0.001 0.01 tp , Pulse Duration Time (sec) 0.1 1 Legal Disclaimer Notice GBP406 thru GBP410 Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.