Industrial Power Control
Silicon Carbide Schottky Diode
Final Datasheet
Rev. 2.0 2014-06-10
IDW10G120C5B
5th V SiC Schottky Diode
1) J-STD20 and JESD22
Final Data Sheet 2 Rev. 2.0, 2014-06-10
5th V SiC Schottky Diode
IDW10G120C5B
thinQ!TM SiC Schottky Diode
Features:
Revolutionary semiconductor material - Silicon Carbide
No reverse recovery current / No forward recovery
Temperature independent switching behavior
Low forward voltage even at high operating temperature
Tight forward voltage distribution
Excellent thermal performance
Extended surge current capability
Specified dv/dt ruggedness
Qualified according to JEDEC1) for target applications
Pb-free lead plating; RoHS compliant
Benefits
System efficiency improvement over Si diodes
Enabling higher frequency / increased power density solutions
System size/cost savings due to reduced heatsink requirements and smaller magnetics
Reduced EMI
Highest efficiency across the entire load range
Robust diode operation during surge events
High reliability
RelatedLinks: www.infineon.com/sic
Applications
Solar inverters
Uninterruptable power supplies
Motor drives
Power Factor Correction
Package pin definitions
Pin 1 anode 1
Pin 2 and backside cathode
Pin 3 anode 2
Key Performance and Package Parameters (leg/device)
Type
VDC
IF
QC
Tj,max
Marking
Package
IDW10G120C5B
1200 V
5 / 10 A
28 / 57 nC
175°C
D1012B5
PG-TO247-3
1
2
3
CASE
Final Data Sheet 3 Rev. 2.0, 2014-06-10
5th V SiC Schottky Diode
IDW10G120C5B
Table of Contents
SiC Schottky Diode ................................................................................................................................................ 2
Table of Contents .................................................................................................................................................. 3
Maximum ratings ................................................................................................................................................... 4
Thermal Resistances ............................................................................................................................................. 4
Electrical Characteristics ...................................................................................................................................... 5
Electrical Characteristics diagrams ..................................................................................................................... 6
Package Drawings ................................................................................................................................................. 9
Revision History .................................................................................................................................................. 10
Disclaimer …………………………………………………………………………………………………………………10
Final Data Sheet 4 Rev. 2.0, 2014-06-10
5th V SiC Schottky Diode
IDW10G120C5B
Maximum ratings
Parameter
Symbol
Value (leg/device)
Unit
Repetitive peak reverse voltage
VRRM
1200
V
Continuous forward current for Rth(j-c,max)
TC = 156°C, D=1
TC = 135°C, D=1
TC = 25°C, D=1
IF
5 / 10
8 / 16
17 / 34
A
Surge non-repetitive forward current, sine halfwave
TC=25°C, tp=10ms
TC=150°C, tp=10ms
IF,SM
70 / 140
65 / 130
A
Non-repetitive peak forward current
TC = 25°C, tp=10 µs
IF,max
530 / 1070
A
i²t value
TC = 25°C, tp=10 ms
TC = 150°C, tp=10 ms
∫ i²dt
25 / 98
21 / 84
A²s
Diode dv/dt ruggedness
VR=0...960 V
dv/dt
80
V/ns
Power dissipation for Rth(j-c,max)
TC = 25°C
Ptot
74 / 148
W
Operating and storage temperature
Tj;Tstg
-175
°C
Soldering temperature,
wavesoldering only allowed at leads
1.6mm (0.063 in.) from case for 10 s
Tsold
260
°C
Mounting torque
M3 and M4 screws
M
0.7
Nm
Thermal Resistances
Parameter
Symbol
Conditions
Value (leg/device)
Unit
min.
typ.
max.
Characteristic
Diode thermal resistance,
junction case
Rth(j-c)
-
1.6/0.8
2.0/1.0
K/W
Thermal resistance,
junction ambient
Rth(j-a)
leaded
-
-
62
K/W
Final Data Sheet 5 Rev. 2.0, 2014-06-10
5th V SiC Schottky Diode
IDW10G120C5B
Electrical Characteristics
Static Characteristic, at Tj=25°C, unless otherwise specified
Parameter
Symbol
Conditions
Value (leg/device)
Unit
min.
typ.
max.
DC blocking voltage
VDC
Tj = 25°C
1200
-
-
V
Diode forward voltage
VF
IF= 5/10 A, Tj=25°C
IF= 5/10 A, Tj=150°C
-
-
1.4
1.7
1.65
2.30
V
Reverse current
IR
VR=1200 V, Tj=25°C
VR=1200 V, Tj=150°C
3 / 6
14 / 28
40 / 80
210 / 420
µA
Dynamic Characteristics, at Tj=25°C, unless otherwise specified
Parameter
Symbol
Conditions
Value (leg/device)
Unit
min.
typ.
max.
Total capacitive charge
QC
VR = 800 V, Tj=150°C & 25°C
R
V
CdVVCQ
0
)(
-
28 / 57
-
nC
Total Capacitance
C
VR=1 V, f=1 MHz
VR=400 V, f=1 MHz
VR=800 V, f=1 MHz
-
-
-
365 / 730
26 / 51
20 / 41
-
-
-
pF
Final Data Sheet 6 Rev. 2.0, 2014-06-10
5th V SiC Schottky Diode
IDW10G120C5B
Electrical Characteristics diagrams
Figure 1. Power dissipation per leg as function
of case temperature, Ptot=f(TC),
Rth(j-c),max
Figure 2. Diode forward current per leg as function
of case temperature, IF=f(TC), Tj≤175°C,
Rth(j-c),max, parameter D=duty cycle,
Vth, Rdiff @ Tj=175°C
Figure 3. Typical forward characteristics per leg,
IF=f(VF), tp= 10 µs, parameter: Tj
Figure 4. Typical forward characteristics in surge
current per leg, IF=f(VF), tp= 10 µs,
parameter: Tj
Per leg
Per leg
Per leg
Per leg
Final Data Sheet 7 Rev. 2.0, 2014-06-10
5th V SiC Schottky Diode
IDW10G120C5B
Figure 5. Typical capacitive charge per leg as
function of current slope1, QC=f(dIF/dt), Tj=150°C
1) guaranteed by design.
Figure 6. Typical reverse characteristics per leg,
IR=f(VR), parameter: Tj
Figure 7. Max. transient thermal impedance per leg,
Zth,j-c=f(tP), parameter: D=tP/T
Figure 8. Typical capacitance per leg as function of
reverse voltage, C=f(VR); Tj=25°C; f=1 MHz
1.E-09
1.E-08
1.E-07
1.E-06
1.E-05
1.E-04
200 400 600 800 1000 1200
IR[A]
VR[V]
-55C
25C
100C
150C
175C
Per leg
Per leg
Per leg
Per leg
Final Data Sheet 8 Rev. 2.0, 2014-06-10
5th V SiC Schottky Diode
IDW10G120C5B
Figure 9. Typical capacitively stored energy as
function of reverse voltage, per leg, EC=f(VR)
0
2
4
6
8
10
12
14
16
18
0200 400 600 800 1000 1200
EC[µJ]
VR[V]
Per leg
Final Data Sheet 9 Rev. 2.0, 2014-06-10
5th V SiC Schottky Diode
IDW10G120C5B
Package Drawings
Final Data Sheet 10 Rev. 2.0, 2014-06-10
5th V SiC Schottky Diode
IDW10G120C5B
Revision History
Disclaimer
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to: erratum@infineon.com
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2014 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon Technologies hereby disclaims any and all
warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual
property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in
question, please contact the nearest Infineon Technologies Office.
The Infineon Technologies component described in this Data Sheet may be used in life-support devices or
systems and/or automotive, aviation and aerospace applications or systems only with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the
failure of that life-support, automotive, aviation and aerospace device or system or to affect the safety or
effectiveness of that device or system. Life support devices or systems are intended to be implanted in the
human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to
assume that the health of the user or other persons may be endangered.
IIDW10G120C5B
Revision: 2014-06-10, Rev. 2.0
Previous Revision:
Revision
Date
Subjects (major changes since last version)
2.0
-
Final data sheet
