Protection Relays Remote Indication and Monitoring RM1000 SERIES Remote Monitor Description The RM-1000 Series is a motor-monitoring device to be used in conjunction with the 777 family of products (excluding the P1 Series), 77C family of products and the 601 voltage monitors, via Modbus protocol with a communications module. The RM-1000/777 motor management system combines unsurpassed electronic motor protection and critical, userfriendly, motor monitoring. The RM1000 Series can monitor up to 16 MotorSaver(R) and/or PumpSaver(R) units through an RS-485 network using Modbus RTU protocol. A second communication port allows monitoring and control of up to 99 MotorSaver(R) and/or PumpSaver(R) units from a computer, PLC, DCS or SCADA system and can be accessed from the host computer or PLC with the RM1000 acting as a repeater for any of its motor protectors. In addition to the monitoring functions, the RM-1000 can be used to reset a tripped MotorSaver(R) or PumpSaver(R). Wiring Diagram Ordering Information MODEL DESCRIPTION RM1000 NEMA 3R and/or UL Type 12 RM1000-3R NEMA 3R RM1000 NEMA 4 NEMA 4X (c) 2016 Littelfuse Protection Relays & Controls www.littelfuse.com/rm1000 The RM1000 Series is easily mounted remotely and improves safety for service and operations personnel by allowing them to control and monitor the device without opening the electrical cabinet. Using the RM1000 is a simple, cost-effective method for aiding compliance with arc flash safety regulations. The enclosure and keypad assembly is water and ultraviolet light resistant. The enclosure is NEMA 3R or NEMA 4X (optional) rated. The RM1000 and RM1000 NEMA 4 also carry a UL Type 12 rating, whereas the RM-1000-3R does not carry the UL Type 12 rating due to added weep holes. The added weep holes in the RM1000-3R make it suitable for applications subjected to condensing moisture/humidity. Rev: 1-A-062716 Protection Relays Remote Indication and Monitoring RM1000 SERIES Features Specifications Displays: Input Characteristics Control Power Functional Characteristics Communication Baud Rate Setup JJ Individual line currents and average current JJ Current and voltage unbalance JJ Individual phase voltages and average voltage JJ Displays last four faults, trip reason, and restart timer status JJ MotorSaver(R) and/or PumpSaver(R) setpoints JJ Run-hours on each motor JJ Warning of pending (imminent) faults Controls: JJ Reset run-hour meter JJ Reset MotorSaver(R) or PumpSaver(R) JJ Change setpoints from the RM1000 Convenience: JJ Power from RS485MS-2W communications module JJ Monitor up to 16 777s with one display JJ NEMA 3R outdoor rated JJ Secondary steel enclosure available Accessories RS485-RS232 Converter with cable & plug Allows RS485 devices to be connected to a PC via the RS232 (serial) port. Provides convenient terminal blocks for making signal and DC power supply connections. Pre-wired. RS485-USB Converter with cable & plug/RS232:USB Allows RS485 devices to be connected to a PC via the USB port. Provides convenient terminal blocks for making signal and DC power supply connections. Pre-wired. RM1000 ENCL Steel enclosure for protecting the RM-1000 remote communications monitor from adverse affects of weather and vandalism, while allowing normal communications connections to the RM-1000 unit. Solutions Software: Solutions-M Software features include data logging, real-time data monitoring and fault and event monitoring. (c) 2016 Littelfuse Protection Relays & Controls www.littelfuse.com/rm1000 12-24VDC (Supplied by RS485MS-2W) Port #1 for 777(s) Port #2 for PC, PLC, etc. 1200-28800 1200-28800 None, Odd, or None, Odd, or Even Parity Even Parity 1 or 2 Stop Bits 1 or 2 Stop Bits Protocol Modbus RTU Modbus RTU Serial Interface RS-485 RS-485 Available Addresses 1-99 addresses Responds to all port #1 (max 16 per RM-1000) Mechanical Life 100,000 actuations Overlay Material Polyester UV Exposure w/o degradation 2000 hrs Terminal Torque (depluggable terminal block) 3 in.-lbs. Panel Thickness 0.03" min, 0.12" max General Characteristics Ambient Temperature Range Operating -40 to 70C (-40 to 158F) Storage -40 to 80C (-40 to 176F) Maximum Input Power 100mA Class of Protection RM1000, RM1000 NEMA 4 NEMA 3R and/or UL Type12, NEMA 4X (optional) RM1000-3R NEMA 3R only Relative Humidity Up to 85%, non-condensing Safety Marks UL UL508 (File #E68520) CSA 22.2 No. 14 (File #46510) CE IEC 60947-6-2 Enclosure Material Black polycarbonate Display Liquid Crystal with extended temp. range Size 2 rows x 16 characters Keypad Six 0.5" stainless steel dome buttons for tactile feedback Dimensions H 91.92 mm (3.62"); W 115.42 mm (4.54"); D 22.86 mm (0.9") Weight 1.5 lbs. (24 oz., 680.39 g) Mounting Method Surface mountable on backplane using 4 screws Rev: 1-A-062716