55000 series VDE approved toggle switches * The switches described below are marked VDE as standard. * UL and CSA agency approvals are also available. To order a switch marked UL or CSA, please complete "Other agency approvals" box. EN 61058-1 A MATERIALS ELECTRICAL SPECIFICATIONS * Contacts : silver * Case : diallylphthalate (DAP) * Actuator : brass, chrome plated with insulating vinyl cap * Bushing : brass, nickel plated * Housing : stainless steel * Terminal seal : epoxy * Class I (normal insulation) * Small contact opening : (< 3 mm (.118)) * Current/voltage rating with resistive load : 3A 250VAC - 6A 125VAC * Dielectric strength : 2.000 Vrms 50 Hz min. between poles and between terminals and frame 1.000 Vrms 50 Hz min. between terminals * Special body for increased creepage distance and air gap : 3 mm (.118) Further specifications, see 5000 series. GENERAL SPECIFICATIONS * Insulating cap, compulsory, supplied glued on the lever : U270 for models 55600A, 55200A and 55200ZA U1040 for models 55200WA and 55200WA X433 * Ground connector : U721 compulsory if the panel is not metallic or not connected to ground * Epoxy sealed terminals standard MODEL STRUCTURE Keyway Solder lugs II I 1-2 4-5 ON ON OFF ON ON III O6.35-40UNS (1/4-40UNS) II I O4.00 (.157 DIA) 24 2 1 12.00 (.472) 7.00 (.275) 4.70 (.185) 3.70 (.145) 1.80 (.070) 1.00 (.039) 55646A 55649A 2.00 (.078) 55636A 55639A 8.00 (.314) Single pole Double pole 11.00 (.433) 11.50 (.452) III 2-3 5-6 4.75 (.187) 3 12.00 (.472) 13.20 (.519) EPOXY Also available with O 6 mm (.236) bushing : 55500. O4.00 (.157 DIA) O1.60 (.062 DIA) Also available with O 6 mm (.236") bushing : 55100. www.apem.com 2 3 4.70 (.185) 13.20 (.519) 14.00 (.551) 4.75 (.187) 12.00 (.472) 4.70 (.185) 2.00 (.078) 7.00 (.275) 1 3.30 (.129) ON ON 1.00 (.039) OFF 1.10 (.043) A-52 I 13.30 (.523) ON ON 4.00 (.157) 55246A 55249A II 24 8.00 (.314) Single pole Double pole 55236A 55239A III O6.35-40UNS (1/4-40UNS) I 1-2 4-5 11.00 (.433) II 11.50 (.452) III 2-3 5-6 4.70 (.185) Keyway Straight PC terminals 4.75 (.187) EPOXY APEM 55000 series VDE approved toggle switches Right angle terminals - horizontal O6.25 (.246 DIA) I 1-2 4-5 7.00 (.275) 12.70 (.500) 13.50 (.531) 7.40 (.291) 3 1 4.70 (.185) EPOXY Also available for VERTICAL mounting (on request). 2 12.70 (.500) 1.10 (.043) "X433" to be placed in the third box of ordering format. 12.00 (.472) 13.20 (.519) 4.70 (.185) ON ON OFF ON ON O6.35-40UNS (1/4-40UNS) O4.00 (.157 DIA) III II I 24 11.00 (.433) 1.00 (.039) 8.00 (.314) 1 2 3 4.70 (.185) 7.00 (.275) 13.20 (.519) EPOXY PANEL CUT-OUT Bushing O 6,35 (1/4) Bushing O 6 (.236) O2.20 (.086 DIA) O6.20 (.244 DIA) O2.20 (.086 DIA) 13.10 (.515) I 1-2 5.30 (.208) II 11.50 (.452) III 2-3 Single pole O6.50 (.255 DIA) 5.08 (.200) Keyway Quick-connect terminals 55236Z 55239ZA A 4.70 (.185) ON ON O1.60 (.062 DIA) 12.70 (.500) OFF 4.70 (.185) 4.70 (.185) 55246WA X433 ON 55249WA X433 ON 11.00 6.00 (.433) (.236) 55236WA 55239WA 5.08 (.200) O4.00 (.157 DIA) III 3.70 (.145) 2.00 (.078) Double pole* II 24 12.70 (.500) Single pole I 14.50 (.570) II 7.40 (.291) III 2-3 5-6 1.57 (.061) * In double pole W models, spacing between poles on PCB is different from standard : 4,7 mm (.185) instead of 3,81 mm (.150) 6.20 (.244) 5.20 (.204) 1.00 (.039) 12.00 (.472) 14.50 (.570) 6.00 (.236) 1.00 (.039) 9.00 (.354) 11.50 (.452) LEVERS -13 -13 -4N For threaded bushing models Cap U270 compulsory For plain bushing models Cap U1040 compulsory For use with paddles only APEM www.apem.com A-53 55000 series VDE approved toggle switches (continued) O4.40 (.173DIA) 6.00 (.236) 1.00 (.039) 9.00 (.354) -33 -33 For threaded bushing models For plain bushing models OTHER AGENCY APPROVALS UL - CSA To order a switch additionally marked UL and/or CSA, complete above box with desired approvals. INSULATING CAPS AND PADDLES Cap/paddle colours + U... Replace last "0" by number 1 1/4 2 3 4 5 7 7/1 9 13.50 (.531) 11.00 (.433) Insulating caps Compulsory - delivered assembled on the lever - not available in ivory colour O3.5 (.137 DIA) U270 O3.5 (.137 DIA) U1040 For threaded bushing models For plain bushing models blue dark blue black green grey yellow ivory white orange Paddles For use with lever 4N only. Shown with threaded bushing. Order separately. 2.00 (.078) 2.25 (.088) 2.00 (.078) 11.00 (.433) 11.00 (.433) 6.60 (.259) 21.55 (.848) 21.40 (.842) O6.35-40UNS (1/4-40UNS) 9.00 (.354) U290N 14.00 (.551) 18.00 (.708) U390N GROUND CONNECTOR 0 7.4 91) (.2 IMPORTANT : compulsory on models with threaded bushing if the panel is not metallic or not connected to ground. Order separately. O1.40 (.055 DIA) 0.80 (.031) O6.35-40UNS (1/4-40UNS) 21.55 (.848) 20.00 (.787) 6.00 (.236) 9.00 (.354) U240N 9.00 (.354) O6.35-40UNS (1/4-40UNS) 5.30 (.208) 14.15 (.557) 6.00 (.236) 12.60 (.496) O6.50 (.255 DIA) 4.80 (.188) A 12.75 (.501) 9.75 (.383) O4.40 (.173DIA) 1.00 (.039) LEVERS O11.8 (.464 DIA) U721 A-54 www.apem.com APEM