A-52 APEM www.apem.com
A
55000 series
VDE approved toggle switches
Solder lugs
Straight PC terminals
III II I
2-3 1-2
5-6 4-5
Single pole Double pole
55236A 55246A ON - ON
55239A 55249A ON OFF ON
• The switches described below are marked VDE as standard.
• UL and CSA agency approvals are also available. To order a switch marked
UL or CSA, please complete “Other agency approvals" box.
ELECTRICAL SPECIFICATIONS
• Class I (normal insulation)
• Small contact opening : µ (< 3 mm (.118))
• Current/voltage rating with resistive load : 3A 250VAC - 6A 125VAC
• Dielectric strength :
2.000 Vrms 50 Hz min. between poles and between terminals and frame
1.000 Vrms 50 Hz min. between terminals
• Special body for increased creepage distance and air gap : 3 mm (.118)
MATERIALS
• Contacts : silver
• Case : diallylphthalate (DAP)
• Actuator : brass, chrome plated
with insulating vinyl cap
• Bushing : brass, nickel plated
• Housing : stainless steel
• Terminal seal : epoxy
GENERAL SPECIFICATIONS
• Insulating cap, compulsory, supplied glued on the lever :
U270 for models 55600A, 55200A and 55200ZA
U1040 for models 55200WA and 55200WA X433
• Ground connector :
U721 compulsory if the panel is not metallic or not connected to ground
• Epoxy sealed terminals standard
MODEL
STRUCTURE
Also available with Ø 6 mm (.236) bushing : 55500.
Also available with Ø 6 mm (.236") bushing : 55100.
III II I
2-3 1-2
5-6 4-5
Single pole Double pole
55636A 55646A ON - ON
55639A 55649A ON OFF ON
Further specifications, see 5000 series.
➞Keyway
➞Keyway
(1/4-40UNS)
(.275)
(.519) (.472)
(.187)
(.157 DIA)
(.070)
(.314) (.452)
(.472)(.145)
(.039)
(.078)
(.185)
EPOXY
24˚
1 3
Ø6.35-40UNS
1.80
7.00
4.70
Ø4.00
4.75
13.20 12.00
2.00
8.00 11.50
1.00
12.003.70
(.433)
11.00
IIIIII
2
1.00
11.508.00
2.00
12.00
13.20
4.75
Ø4.00
4.70
7.00
Ø6.35-40UNS
24˚
EPOXY
(.185)
(.078)
(.039)
(.452)(.314)
(.157 DIA)
(.187)
(.472)
(.519)
(.275)
(1/4-40UNS)
(.523)
(.157)
(.551)(.129)
(.043)
4.00 13.30
14.003.30
1.10
(.185)
(.187)
(.185)
(.062 DIA)
Ø1.60
4.75
4.70 4.70
11.00
(.433)
III II I
1 2 3
EN 61058-1
APEM www.apem.com A-53
A
55000 series
VDE approved toggle switches
Right angle terminals - horizontal
"X433" to be placed in the third box of ordering format.
Also available for VERTICAL mounting (on request).
PANEL CUT-OUT
Bushing Ø 6,35 (1/4) Bushing Ø 6 (.236)
LEVERS
-13 -4N
For threaded bushing models
Cap U270 compulsory
-13
For plain bushing models
Cap U1040 compulsory For use with paddles only
III II I
2-3 1-2
5-6 4-5
Single pole Double pole*
55236WA 55246WA X433 ON - ON
55239WA 55249WA X433 ON OFF ON
Quick-connect terminals
III II I
2-3 1-2
Single pole
55236Z ON - ON
55239ZA ON OFF ON
* In double pole W models, spacing
between poles on PCB is different from
standard : 4,7 mm (.185) instead of
3,81 mm (.150)
➞Keyway
(.500)(.185) (.291)
(.500) (.291)
24˚
(.433) (.236) (.570)(.078)
(.519)
(.472)
(.275)
(.157 DIA)
(.185)
(.246 DIA)
(.145)
(.043)
I
(.500)(.185) (.500)
(.185)
(.185)
(.200)
(.200)
(.062 DIA)
(.531)
7.00
Ø6.25
4.70 12.00
3.70
Ø4.00 5.08
5.08
4.70
1.10
12.70 7.40
14.506.0011.002.00
4.70 12.70 7.40
12.7012.704.70
13.20
4.70
Ø1.60
13.50
3
EPOXY
II III
21
(1/4-40UNS)
(.275) (.519)
(.157 DIA)
(.314) (.452)
(.039)
(.185)
EPOXY
24∞
I II III
Ø6.35-40UNS
7.00
4.70
Ø4.00
13.20
8.00 11.50
1.00
12 3
(.061)
(.515)(.208)
5.30 13.10
1.57
(.433)
11.00
5.20
Ø2.20Ø6.50 (.086 DIA)
(.255 DIA)
(.204)
(.086 DIA)
Ø2.20
6.20
Ø6.20
(.244)
(.244 DIA)
1.00
9.00
(.039)
(.354)
(.452)
11.50
1.00
6.00
(.039)
(.236) (.570)
14.50
12.00
(.472)
A-54 APEM www.apem.com
A
55000 series
VDE approved toggle switches
OTHER AGENCY APPROVALS
To order a switch additionally marked UL and/or CSA, complete above box with desired approvals.
UL - CSA
+ U...
INSULATING CAPS AND PADDLES
GROUND CONNECTOR
U270
For threaded bushing models
IMPORTANT : compulsory on models
with threaded bushing if the panel is
not metallic or not connected to
ground. Order separately.
Insulating caps
Compulsory - delivered assembled on the lever - not available in ivory colour
U1040
For plain bushing models
Paddles
For use with lever 4N only.Shown with threaded bushing. Order separately.
U240N
U721
U290N U390N
Cap/paddle
colours
Replace last
"0" by number
1blue
1/4 dark blue
2black
3green
4grey
5yellow
7ivory
7/1 white
9orange
(.433)
11.00
(.137 DIA)
Ø3.5
(.496)
12.60
(.259)
(.208)
(.088)
2.25 6.60
5.30
(.557)(.354)
(1/4-40UNS)
14.159.00
Ø6.35-40UNS
(.787)
20.00
(.433)
(.236)
(.078)
2.00 11.00
6.00
(.848)(.354) 21.559.00
Ø6.35-40UNS
(1/4-40UNS)
(.842)
21.40
(.433)
(.551)
(.708)
(.236)
(.078)
2.00
6.00
11.00
14.00
18.00
9.00 21.55
(.354) (.848)
Ø6.35-40UNS
(1/4-40UNS)
(.188)
(.031)
(.255 DIA)
(.464 DIA)
(.291)
(.055 DIA)
Ø6.50
Ø11.8
Ø1.40
4.80
7.40
0.80
(.531)
13.50
(.137 DIA)
Ø3.5
LEVERS (continued)
-33
For threaded bushing models
-33
For plain bushing models
1.00
9.00
(.039)
(.354) (.383)
9.75
Ø4.40
(.173DIA)