3M
617-8334 6200 Multimode Hotmelt 125 µM 11.16 10.36
617-8336 6202 Multimode Epoxy 125 µM 10.63 9.87
617-8338 8203 Single-mode Epoxy 126 µM 13.33 12.38
617-8340 8204 Single-mode Epoxy 127 µM 12.83 11.91
FC Couplings (Not Shown)
617-8342 6210 Multimode Ñ Ñ 7.95 7.21
617-8344 8210 Single-mode Ñ Ñ 11.57 10.52
Stock Mfr.Õs Termination Fiber
Description
No. Type Style Size
Fiber Optic Products
For Fast, Dependable Service, Make Just One Call Ñ 1-800-433-5700 ALLIED
c
355
ST* Connectors
SC Connectors
FC Connectors
Field Termination Kits
Fiber Optic Splice Case gives you great protection for fiber optic connections. This series is
designed with larger and smaller interchangeable closure halves so you can select the size
case that meets your needs today but with the flexibility to expand for the future.
Stock Mfr.Õs Description EACH
No. Type
617-2531 2178S Small Splice Case, contains materials for installation of 3 cables 267.75
617-2532 2178LS Large Splice Case, contains materials for initial installation of 4 cables 314.16
617-2533 2524 Optical Fiber Splice Organizer Tray 42.23
617-2534 2524-FT Optical Splice Organizer Tray for Fusion Splices 46.41
The 3M
ª
ST* Connector product line provides high repeatability and low light loss for
premises, LAN and telco applications. The improved 3M connector design is compatible
with the AT&T ST* connector product line as well as the Premise Distribution System
(PDS) components and other ST* connector products. The 3M products are supplied with
a high quality PC finish on zirconia ceramic ferrules.
Bayonet-Style Connectors Ñ Fig. A
The new 3M brand FC Connector has been designed to combine the best features of the 3M
FC (field mountability) and the 3M FC (pull-proof design) into one versatile connector
design that is fully compatible with all FC Connectors adhering to the NTT specification. The
FC incorporates 3M pre-radiused PC zirconia ceramic technology to provide high optical
performance and minimize reflected power to Ð50 dB on factory polished cable assemblies.
The ferrule is independent of the backbone so that a pull on the jacketed connectorized
cable will not cause the ferrule to break optical contact with a second ferrule in a
connection.
FC Connector
3M has simplified the design of the SC connector to enhance performance and cable
retention, and provide a readily field mountable connector. The connector is fully compliant
to the NTT, JIS, ISO/IEC, and TIA/EIA component and ISO/IEC, CENELEC, ANSI,
TIA/EIA-568A and BICSI system and cabling level standards. The 3M SC Connector has a
rectangular push-pull coupling mechanism for easy insertion and high repeatability.
SC Connectors Ñ Fig. C
EACH
25-491-24
617-6901 6901 Multimode Crimplok
ª
125 µM 9.17 8.51
617-8300 6100 Multimode Hotmelt 125 µM 7.03 6.46
617-8302 6105 Multimode Epoxy 125 µM 3.03 2.84
617-8301 8100YS Single-mode Hotmelt 126 µM 14.89 13.83
617-8306 8106 Single-mode Epoxy 126 µM 8.41 7.73
617-8308 8107 Single-mode Epoxy 127 µM 14.80 13.60
617-8303 8901 Single-mode Crimplok
ª
126 µM 11.53 10.71
Push-Pull Style Connectors Ñ Fig. B
617-8310 6102-H Multimode Hotmelt 125 µM 9.76 9.06
617-8312 8103 Single-mode Epoxy 126 µM 17.42 16.18
617-8314 8104 Single-mode Epoxy 127 µM 17.42 16.18
ST Couplings (Not Shown)
617-8317 6112 Multimode Ñ Ñ 2.42 2.14
617-8323 8119 Single-mode Ñ Ñ 8.19 7.38
Duplex Couplings (Not Shown)
617-8319 6113 Multimode Ñ Ñ 11.95 10.87
617-8321 8113 Single-mode Ñ Ñ 13.93 12.67
EACH
1-24 25-49
Stock Mfr.Õs Termination Fiber
Description
No. Type Style Size
EACH
1-24 25-49
617-6900 6900 Multimode Crimplok
ª
125 µM 10.82 10.06
617-8324 6300 Multimode Hotmelt 125 µM 9.11 8.45
617-8326 6306 Multimode Epoxy 125 µM 4.91 4.57
617-8327 8300 Single-mode Hotmelt 126 µM 14.89 13.83
617-8328 8306 Single-mode Epoxy 126 µM 12.49 11.60
617-8330 8307 Single-mode Epoxy 127 µM 12.06 11.20
617-8329 8900 Single-mode Crimplok
ª
126 µM 13.18 12.24
SC Coupling Ñ Fig. D
617-8332 8310 Single-mode Ñ Ñ 8.22 7.47
617-8325 6310 Multimode Ñ Ñ 5.30 4.69
Stock Mfr.Õs Termination Fiber
Description
No. Type Style Size
FibrlokªII Optical Fiber Splice
Fibrlok provides a precise, simple and low cost method of splicing fiber. For use with
single-mode or multi-mode fiber. The inexpensive assembly tool turns any craft person into
a splicing expert.
Model 2529. Universal Optical Fiber Splice. 250 to 900, any combination.
617-2529. 2529 ...............................................................................................EACH 11.66
617-2501. 2501. Assembly Tool .....................................................................EACH 80.74
Model 2529-K. Universal Optical Fiber Splice Kit (60 Splices, and one 2501 Assembly Tool).
617-2530. 2529-K............................................................................................EACH 1335.28
3M Fiber Optics
c
Three Styles of Connectors: 3M
ª
Crimplok
ª
, Hot Melt and Epoxy
c
3M
ª
Crimplok
ª
Connectors Are the Ideal Solution When Electricity Is Unavailable
c
The Superior Adhesive and Ceramic Technologies Behind 3M
ª
Hot Melt Fiber Optic
Connectors Ensure Economical Terminations That Are Dependable and Quick to
Install
c
Termination Kits Provide All Tools and Materials Necessary to Terminate all of 3MÕs
Fiber Optic Connectors
Field termination kits provide everything needed for an organized, quick installation.
617-6951. 6955. ÒCrimplok
ª
Ó Field Termination Kit ........................................EACH 654.85
617-6954. 6156. ÒHotmeltÓ ST Conversion Termination Kit ...........................EACH 411.92
617-6953. 6355. ÒHotmeltÓ Termination Kit ....................................................EACH 1071.00
617-8380. 8250. ÒEpoxyÓ ST Termination Kit..................................................EACH 1626.84
617-8400. 8350. ÒEpoxyÓ SC/FC PC3 Termination Kit.....................................EACH 1626.84
Fiber Optic Splice Cases and Trays Ñ NEW Ñ
8
