110 WATTS
SINGLE/MULTI OUTPUT AC-DC
FEATURES:
CHASSIS/COVER OPEN FRAME
SAFETY SPECIFICATIONS
Underwriters Laboratories
UL 60950-1:2007, 2nd Edition
File E137708/E140259
AAMI/ANSI ES60601-1:2005/(R) 2012
CB Reports/Certificates (including all
National and Group Deviations)
IEC 62368-1:2014, 2nd Edition
IEC 60601-1:2005/A1:2012
UL Recognition
CAN/CSA-C22.2 No. 60950-1-07, 2nd Edition
CAN/CSA-C22.2 No. 60601-1:2014
Mark for Canada
File E137708/E140259
EN 62368-1:2014, 2nd Edition
EN 60601-1:2006/A1:2013
TUV
Low Voltage Directive
(2014/35/EU of February 2014)
RoHS Directive (Recast)
(2011/65/EU of June 2011)
MODEL LISTING
MODEL
OUTPUT 1(21)
OUTPUT 2(21)
OUTPUT 3(20)
OUTPUT 4(20)
REL-110-4001
+3.3V/10A(22)
+5V/6A
+12V/2A
-12V/2A
REL-110-4002
+5V/10A(22)
+3.3V/6A
+12V/2A
-12V/2A
REL-110-4003
+5V/10A(22)
+3.3V/6A
+15V/2A
-15V/2A
REL-110-4004
+5V/10A(22)
-5V/6A
+12V/2A
-12V/2A
REL-110-4005
+5V/10A(22)
-5V/6A
+15V/2A
-15V/2A
REL-110-4006
+5V/10A(22)
+24V/2A
+12V/2A
-12V/2A
REL-110-4007
+5V/10A(22)
+24V/2A
+15V/2A
-15V/2A
REL-110-4009
+5V/10A(22)
+24V/2A
+7V/2.5A
-7V/2.5A
REL-110-3001
+5V/10A(22)
+12V/3A
-12V/3A
REL-110-3002
+5V/10A(22)
+15V/2A
-15V/2A
REL-110-3003
+8V/6A
-8V/1A
+30V/1A
REL-110-3004
+9V/3A
-24V/3A
+13V/2A
REL-110-2001
+3.3V/10A(22)
+5V/6A
REL-110-2002
+5V/10A(22)
+12V/5A
REL-110-2003
+5V/10A(22)
+24V/3A
REL-110-2004
+12V/5A
-12V/4A
REL-110-2005
+15V/4A
-15V/3A
REL-110-2006
+18V/4A
-18V/3A
REL-110-1001
2.5V/22A(23)
REL-110-1002
3.3V/22A(23)
REL-110-1003
5V/22A(23)
REL-110-1004
12V/9.2A
REL-110-1005
15V/7.3A
REL-110-1006
24V/4.6A
REL-110-1007
28V/3.9A
REL-110-1008
48V/2.3A
ORDERING INFORMATION
Consult factory for alternate output configurations.
Consult factory for positive, negative or floating outputs.
Please specify the following optional features when ordering:
CH – Chassis I/O – Isolated Outputs
CO – Cover TS – Terminal Strip
REL-110
OUTPUT SPECIFICATIONS
Total Output Power at 50°C(1)
80W
(See Derating Chart)
110W
Output Voltage Centering
Output 1:
0.5%
(All outputs
Output 2:
5.0%
at 50% load)
Output 3:
5.0%
Output 4:
5.0%
Output Voltage Adjust Range
Output 1:
95-105%
Load Regulation
Output 1:
0.5%
(10-100% load change)
Output 2:
5.0%
(4001-5 Models)
8.0%
(2001 Model)
6.0%
Output 3:
5.0%
Output 4:
5.0%
Source Regulation
Outputs 1 – 4:
0.5%
Cross Regulation
Outputs 2 – 4:
5.0%
Output Noise
Outputs 1 – 4: 1.0%
Turn on Overshoot
None
Transient Response
Outputs 1 – 4
Voltage Deviation
5.0%
Recovery Time
500S
Load Change
50% to 100%
Output Overvoltage Protection
Output 1: 110% to 150%
Output Overpower Protection
110-160% rated Pout, cycle on/off, auto recovery
Hold Up Time
16mS min., Full Power, 85V Input
Start Up Time
4 Seconds, 120V Input
INPUT SPECIFICATIONS
Protection Class
I
Source Voltage
85 – 264 Volts AC
Frequency Range
47 – 63 Hz
Peak Inrush Current
40A
Efficiency
82% Typ., Full Power, 230V, varies by model
Power Factor
0.95 (Full Power, 230V)
ENVIRONMENTAL SPECIFICATIONS
Ambient Operating
0C to + 70C
Temperature Range
Derating: See Power Rating Chart
Ambient Storage Temp. Range
- 40C to + 85C
Temperature Coefficient
Outputs 1 – 4:
0.02%
/C
GENERAL SPECIFICATIONS
Means of Protection
Primary to Secondary
2MOPP (Means of Patient Protection)
Primary to Ground
1MOPP (Means of Patient Protection)
Secondary to Ground
Operational Insulation(Consult factory for 1MOOP or 1MOPP)
Dielectric Strength(8, 9)
Reinforced Insulation
5656 VDC, Primary to Secondary
Basic Insulation
2121 VDC, Primary to Ground
Operational Insulation
707 VDC, Secondary to Ground
Leakage Current
Earth Leakage
<300µA NC, <1000µA SFC
Touch Current
<100µA NC, <500µA SFC
Power Fail Signal(14)
Logic low with input power failure 10 ms
minimum prior to Output 1 dropping 1%
Remote Sense (singles only)(10)
250mV compensation of output cable losses
Mean-Time Between Failures
100,000 Hours min., MIL-HDBK-217F, 25° C, GB
Weight
0.80 Lbs. Open Frame/ 1.28 Lbs. Chassis and Cover
EMC SPECIFICATIONS (IEC 60601-1-2:2014, 4TH ed./IEC 61000-6-2:2005)
Electrostatic Discharge
EN 61000-4-2
8KV contact / 15KV air discharge A
Radiated Electromagnetic Field
EN 61000-4-3
80MHz-2.7GHz, 10V/m, 80% AM A
Electrical Fast Transients/Bursts
EN 61000-4-4
2 KV, 5KHz/100KHz A
Surge Immunity
EN 61000-4-5
2 KV line to earth / 1 KV line to line A
Conducted Immunity
EN 61000-4-6
0.15 to 80MHz, 10V, 80% AM A
Magnetic Field Immunity
EN 61000-4-8
30A/m, 60 Hz. A
Voltage Dips
EN 61000-4-11
0% UT, 0.5 cycles, 0-315° 100/240V A/A
0% UT, 1 cycles, 0° 100/240V A/A
40% UT, 10/12 cycles, 0° 100/240V B/A
70% UT, 25/30 cycles, 0° 100/240V B/A
Voltage Interruptions
EN 61000-4-11
0% UT, 300 cycles, 0° 100/240V B/B
Radiated Emissions
EN 55011/32
Class B
Conducted Emissions
EN 55011/32
Class B
Harmonic Current Emissions
EN 61000-3-2
Class A
Voltage Fluctuations/Flicker
EN 61000-3-3
Compliant
All specifications are maximum at 25 C, 110W unless otherwise stated, may vary by model and
are subject to change without notice.
• Compact 3" x 5" x 1.3" Size
• 2 Year Warranty
• Universal 85-264V Input
• One to Four Outputs
• High Efficiency
• 0-70°C Operating Temperature
• IEC 60601-1 3rd ed. Medical Cert.
• IEC 60950-1 2nd ed. ITE Certification
• IEC 60601-1-2 4th ed. EMC
• Class B Emissions per EN55011/32
• RoHS Compliant
• Optional Chassis/Cover
INTEGRATED
POWER DESIGNS 300 Stewart Road ■ Wilkes-Barre, PA 18706 ■ Phone: (570) 824-4666 ■ Fax: (570) 824-4843 ■ Email: sales@ipdpower.com ■ Web: www.ipdpower.com
0
10
20
30
40
50
60
70
80
90
100
110
010 20 30 40 50 60 70
Output Power (Watts)
Ambient Temperature (C)
F O R C E D A I R C O O L I N G
C O N V E C T I O N C O O L I N G
C O N V E C T I O N C O O L I N G
W I T H C H A S S I S / C O V E R
REL-110 SERIES MECHANICAL SPECIFICATIONS
APPLICATIONS INFORMATION
1. Each output can deliver its rated current but Total Output Power must not exceed 110W,
as determined by the cooling method.
2. Generally, adequate cooling is provided when semiconductor case temperatures do not
exceed 70°C rise and transformer temperature does not exceed 60°C rise at any
specified ambient temperature.
3. Sufficient area must be provided around power supply to allow natural movement of air to
develop in convection-cooled applications.
4. This product is intended for use as a professionally-installed component within information
technology, industrial, and medical equipment and is not intended for stand-alone
operation.
5. A minimum load of 10% is required on Output 1 to ensure proper regulation of remaining
outputs.
6. This product includes only one fuse in the input circuit. In consideration of Clause 8.11.5
of IEC 60601-1:2005, a second fuse may be required in neutral conductor of the end
product.
7. Peak-to-Peak Output Ripple and Noise is measured directly at the output terminals of the
power supply, without the use of the probe ground lead or retractable tip (tip-and-barrel
method), 20 MHz bandwidth.
8. This product was type-tested and safety-certified using the dielectric strength test voltages
listed in Table 6 of IEC 60601-1:2005. In consideration of Clause 8.8.3, care must be
taken to insure that the voltage applied to a reinforced insulation does not overstress
different types and levels of insulation. Primary and secondary-to-ground capacitors may
need to be disconnected prior to performing a dielectric strength test on the power supply
or the end product. It is highly recommended that the DC test voltages listed in DVB.1,
Annex DVB of UL 60601-1 1st Edition are not exceeded during a production-line dielectric
strength test of the assembled end product. Please consult factory for further information.
9. This power supply has been safety-approved and final-tested using a DC dielectric
strength test. Please consult factory before performing an AC dielectric strength test.
10. Remote-Sense terminals may be used to compensate for cable losses up to 250mV
(single-output models only). The use of a twisted pair, decoupling capacitors and an
appropriately-rated low-impedance capacitor connected across the load will increase
noise immunity.
11. Maximum screw penetration into bottom chassis mounting holes is 0.100 inches.
Maximum screw penetration into side chassis mounting holes is 0.250 inches.
12. To comply with emissions specifications, all four mounting hole pads must be electrically
connected to a common metal chassis. Chassis/Cover option is recommended. Refer to
Operating Instructions for additional information.
13. Common RF shielding precautions may need to be taken to assure emissions
compliance. Refer to Operating Instructions for additional information.
14. Power-Fail (AC-Good) feature provides a logic-low warning signal from an open collector
transistor output 10ms prior to loss of output from AC failure, 5V/10mA.
15. 300LFM minimum of airflow must be maintained one inch above all points of top-side
components or cover when forced-air cooling is required.
16. Total power must not exceed 80W with convection cooling on open-frame models except
where noted.
17. Total power must not exceed 110W with 300LFM forced-air cooling on open-frame
models.
18. Total power must not exceed 65W with convection cooling and Chassis/Cover option.
19. Total power must not exceed 110W with 300LFM forced-air cooling and Chassis/Cover
option.
20. Total current from Outputs 3 & 4 must not exceed 3A with convection cooling.
21. Total current from Outputs 1 & 2 must not exceed 12A with convection cooling.
22. Rated 8A maximum with convection cooling.
23. Rated 16A maximum with convection cooling.
MAXIMUM OUTPUT POWER vs. AMBIENT TEMPERATURE
CONNECTOR SPECIFICATIONS
P1
AC Input
0.156 friction lock header mates with Tyco 640250-3 or
equivalent crimp terminal housing with Tyco 3-640706-1 or
equivalent crimp terminal.
P2
DC Output
(Single)
0.156 friction lock header mates with Tyco 770849-8 or
equivalent crimp terminal housing with Tyco 3-640707-1 or
equivalent crimp terminal.
P2
DC Output
(Multiple)
0.156 friction lock header mates with Tyco 1-770849-0 or
equivalent crimp terminal housing with Tyco 3-640707-1 or
equivalent crimp terminal.
G
Ground
0.187 quick disconnect terminal.
P3
P.F./Sense
(Single)
0.100 breakaway header mates with Molex 50-57-9006 or
equivalent crimp terminal housing with Molex type 71851 or
equivalent crimp terminal.
P3
P.F.
(Multiple)
0.100 breakaway header mates with Molex 50-57-9002 or
equivalent crimp terminal housing with Molex type 71851 or
equivalent crimp terminal.
INTEGRATED
POWER DESIGNS 300 Stewart Road ■ Wilkes-Barre, PA 18706 ■ Phone: (570) 824-4666 ■ Fax: (570) 824-4843 ■ Email: sales@ipdpower.com ■ Web: www.ipdpower.com
REV.Q 03/20/2019