The Amprobe AM-530 is the fully-featured multimeter of choice for the
professional electrical contractor. Measure and verify presence of voltage in
order to connect equipment or to perform repairs, run new wiring, check
continuity of electrical connections, identify blown fuses, troubleshoot motors
or check transformers. The AM-530 features true-rms sensing to accurately
measure voltage on systems affected by harmonics, a built in flashlight to
detect wire colors in the dark, a “third hand” probe holder and VolTect™
non-contact voltage detection.
AM-530
True-rms Electrical
Contractor Multimeter
For detailed specifications and ordering info go to
©2014 Amprobe Test Tools. All rights reserved.
www.Amprobe.com
AM-500 Digital Multimeter Series
AM-530 DETAILED SPECIFICATIONS
Specifications Range Best Accuracy
Yes
400 mV
4.000 / 40.00 / 400.0 / 600 V ±(1.0 % Rdg + 3 LSD) @ 45 Hz to 400 Hz, 4 V to 400 V ranges
400mV
4.000 / 40.00 / 400.0 / 600 V ±(0.8% Rdg + 1 LSD) @ 4 V to 400 V ranges
400.0 Ohms
4.000 / 40.00 / 400.0 kOhms
4.000 / 40.00 MOhms
±(1.0% Rdg + 2 LSD) @ 4 kOhms to 400 kOhms ranges
400.0 / 4000 µA
40.00 / 400.0 mA
4.000 / 10.00 A
±(1.2% Rdg + 3 LSD) @ 400 µA to 400 mA ranges, 45 Hz to 400 Hz
400.0 / 4000 µA
40.00 / 400.0 mA
4.000 / 10.00 A
±(1.0% Rdg + 2 LSD) @ 400 µA to 400 mA ranges
10 Hz to 10 MHz ±(0.1% Rdg + 4 LSD)
40.00 / 400.0 nF
4.000 / 40.00 / 400.0 / 4000 µF ±(3.0% Rdg + 5 LSD) @ 400 nF to 40 µF ranges
-40 °F to 1832 °F
-40 °C to 1000 °C
°F: ±(1.8% rdg + 6 °F) @ >32 °F to 212 °F
°C: ±(1.2% rdg + 3 °C) @ >0 °C to 100 °C
Single Thermocouple
For more detailed specifications see instruction manual.
AM-500 AM-510 AM-520 AM-530 AM-540 AM-550
Application:
Functions
Safety
True-rms ■ ■
AC Voltage (V)
DC Voltage (V)
AC Current (A)
DC Current (A)
Resistance (MOhms)
Micro Amps ■ ■ ■ ■ ■ ■
Diode test ■ ■ ■ ■ ■ ■
Continuity ■ ■ ■ ■ ■ ■
Battery test ■ ■
Capacitance ■ ■ ■ ■ ■
Frequency ■ ■ ■ ■ ■
TM Non-contact voltage ■ ■ ■ ■ ■
Duty cycle ■ ■ ■
Temperature inputs 1 1 2
2
Features
Autoranging ■ ■ ■ ■ ■ ■
Manual ranging ■ ■ ■ ■ ■
Low pass filter ■ ■
Low Z ■
Built-in flashlight ■ ■ ■ ■ ■
Display
LCD Counts
Backlight ■ ■ ■ ■ ■
Bar graph ■ ■ ■ ■
Dual display ■ ■
Events
Data hold ■ ■ ■ ■ ■ ■
Relative reading ■ ■ ■ ■ ■
Max/min hold ■ ■ ■ ■
Peak hold (crest) ■ ■
Amprobe
info@amprobe.com
Everett, WA 98203
Tel: 877-AMPROBE (267-7623)
AmprobeEurope
In den Engematten 14,
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
For detailed specifications and ordering info go to
©2014 Amprobe Test Tools. All rights reserved.
www.Amprobe.com
AM-500 SERIES SELECTION GUIDE
INCLUDED ACCESSORIES
Model Batteries (Installed) Test Leads Temperature Probe Temperature
Adaptor Velcro Strap Carrying Case User’s Manual
■ ■
■ ■
■ ■■■
■ ■■■
■ ■■■■
■ ■■■■
