MITSUBISHI Confidential (1/22) AA057VF02_02_00
TENTATIVE
All information in this technical data sheet is tentative
and subject to change without notice.
5.7”VGA
TECHNICAL SP ECIFICATION
AA057VF02
MITS UBIS HI ELECTRIC Co rp.
Date: Mar.21,’08
MITSUBISHI Confidential (2/22) AA057VF02_02_00
CONTENTS
No.Item Page
-- COVER 1
-- CONTENTS 2
1 APPLICATION 3
2 OVERVIEW 4
3 ABSOLUTE MAXIMUM RATINGS 5
4 ELECT RICAL CHARACTERISTICS 5, 6
5 INTERF ACE PIN CONNECTION 7, 8
6 INTERF ACE TIMING 9, 10 , 11 , 12
7 BLOCK DIAGRAM 13
8 MECHANICAL SPECIFICATION 14, 15
9 OP TICAL CHARACTERIST ICS 16, 17, 1 8
10 RELIABILI TY TEST COND ITION 19
11 OTHER FEATURE 20
12 HANDL ING PRECAUTIONS FOR TFT-LCD MODULE 21, 22
MITSUBISHI Confidential (3/22) AA057VF02_02_00
1. APPLICATION
This specification applies to color TFT-LCD module, AA057VF02.
These specification papers are the proprietary product of Mitsubishi Electric Corporation
(“MITSUBISHI) and include materials protected under copyright of MITSUBISHI. No part of this
document may be reproduced in any form or by any means without the express written permission
of MITSUBISHI.
MITSUBISHI does not assume any liability for infringement of patents, copyrights or other
intellectual property rights of third parties by or arising from use of a product specified in this
document. No license, express, implied or otherwise, is granted under any patents, copyrights or
other intellectual property rights of MITSUBISHI or of others.
MITSUBISHI classifies the usage of the TFT-LCD module as follows. Please confirm the usage
before using the product.
(1) St anda rd Usage
Computers, office equipment, factory automation equipment, test and measurement
equipment, communications, transportation equipment(automobiles, ships, trains, etc.),
provided, however, that operation is not influenced by TFT-LCD directly.
(2) Sp ecia l Usa ge
Medical equipment, safety equipment, transportation equipment, provided, however, that
TFT-LCD is necessary to its operation.
(3) Sp ecific Usage
Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control
systems, life support systems and any other equipment. MITSUBISHI should make a
contract that stipulate apportionment of responsibilities between MITSUBISHI and our
customer.
The product specified in this document is designed for “Standard Usage” unless otherwise specified
in this document. If customers intend to use the product for applications other than those specified
for “Standard Usage”, they should first contact MITSUBISHI sales representative for it's intended
use in writing.
MITSUBISHI has been making continuous effort to improve the reliability of its products.
Customers should implement sufficient reliability design of their application equipments such as
redundant system design, fail-safe functions, anti-failure features.
MITSUBISHI assumes no responsibility for any damage resulting from the use of the product that
does not comply with the instructions and the precautions specified in this document.
Please contact and consult a MITSUBISHI sales representative for any questions regarding this
product.
MITSUBISHI Confidential (4/22) AA057VF02_02_00
2. OVERVIEW
AA057VF02 is 5.7” color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed
of LCD p anel, driver ICs, control circuit, LED d river and backlight unit .
By applying 6 bit digital data 640 × 480, 262k-color images are displayed on the 5.7” diagonal
screen. Input power voltages are 3.3 V for LCD driving and 5.0 V for backlight unit.
The type of data and control signals are digital and transmitted via CMOS interface per Typ. 25
MHz clock cycl e .
General s p ecifications are sum m arized in the follow ing table:
ITEM SPECIFICATION
Display Area (mm) 115.2 (H) × 86.4 (V)
(5.7-in ch diagonal)
Number of Dots 640 × 3 (H) × 480 (V)
Pixel Pitch (mm) 0.18 (H) × 0.18(V)
Color Pixel Arrangement RGB verti cal st ri pe
Display Mode Normally white T N
Number of Color 262k
Luminance (cd/m2) 400
Wide Viewing Angle Technology Optica l comp ensat ion film
Viewing Angle (CR ≥ 10) −80∼8 0° (H) −60~80° (V)
Surface Treatment Clear and hard-coating 3H
Electrical Interface CMOS
Optimum Viewing Angle (Contrast ratio) 6 o’clock
Module Size (mm) 135.0 (W) × 104.6 (H) × 8.85 (D)
Module Mass (g) 165
Backlight Unit LED
Characteristic value without any note is typical value.
MITSUBISHI Confidential (5/22) AA057VF02_02_00
3. ABSOLUTE MAXI MUM RATINGS
ITEM SYMBOL MIN. MAX. UNIT
Power Supply Voltage fo r L C D VCC −0.3 4.0 V
Logic Input Voltage VI −0.3 6.0 V
Backlight Voltage VL −0.6 6.5 V
Backlight ON-OFF BLEN −0.6 6.5 V
Light Dimming Control Voltage VBRT −0.6 6.5 V
Operation Temperature (Panel) Note 1,2) T
op(Panel) −20 70 °C
Operation Temperature (Ambient) Note 2) T
op(Ambient) −20 70 °C
Storage Temperature Note 2) T
stg −30 80 °C
[Note]
1) Measured at the center of active area and at the center of panel back surface
2) Top,Tstg ≤ 40°C : 90%RH max. without condensation
Top,Tstg > 40°C : Absolute humidity shall be less t han the value of 90%RH at 40°C without
condensation.
4. EL ECTRICAL CHARACTERISTICS
(1) TFT- LCD Ambient temperature: Ta = 25℃
ITEM SYMBOL MIN. TYP. MAX. UNIT Remarks
Power Supply Voltage for LCD VCC 3. 0 3.3 3 .6 V *1)
Power Supply Current for LCD ICC -- 300 400 mA *2)
Permissive Input Ripple Voltage VRP -- -- 100 mVp-p VCC=+3.3V
High VIH 2.0 -- 5.5 V
Logic Input Voltage Low VIL 0 -- 0.8 V
*1) Power and signals sequence:
t1 ≤ 10 ms 200 ms ≤ t4
0 < t2 ≤ 50 ms 200 ms ≤ t5
0 < t3 ≤ 50 ms0 ≤ t6
t1 t2 t3
data 0.9VCC
0.9VCC
0.1VCC
VCC
t4
t5 t6
data: RGB DATA
,
DCLK
,
DENA
,
R/L
,
U/D
0.1VCC 0.1VCC
LCD Power Supply
Lo
g
ic Si
g
nal
Backli
g
ht Power Su
pp
l
y
MITSUBISHI Confidential (6/22) AA057VF02_02_00
VCC-dip cond itions:
1) When 2.4 V ≤ VCC < 3.0 V, td ≤ 10 ms
2) W he n VCC < 2.4 V
VCC-dip conditions should also follow the power and signals sequence.
td
2.4 V
3.0 V
VCC
*2) VCC = + 3.3 V, fH=31.5kHz, fV=60Hz, fCLK= 25MHz
Display image of typical is 64-gray-bar pattern (6 bit), 480 line mode.
*3) Fuse
Parameter Fuse Type Name Supplier Remark
VCC FCC16162AB Kamaya Electric Co., Ltd. *)
*) The power supply capacity should be designed to be more than the fusing current.
(2) Backlight Ta=25°C
ITEM SYMBOL MIN. TYP. MAX. UNIT Remarks
Input Voltage VL 4.5 5.0 5.5 V *3)
Input Current IL -- -- 750 mA IF=90 mA
High 0.8VL -- VL V ON
Backlight ON-OFF
Low BLEN 0 -- 0.2VL V OFF
LED Life Time LT 60000 -- -- h *1), IF= 90 mA
Continuous Operation
Light Dimming Control Voltage VBRT 0 -- 2.5 V 0V: Ma xim um Luminance
*1) LED life time is defined as the time when the brightness becomes 50 % of the init ial value.
*2) Comply with the LED power-on sequence of VL→BLEN, VBRT, and LED power-off sequence of
BLEN, VBRT→VL.
*3) Fuse
Parameter Fuse Type Name Supplier Remark
VL TF16SN3.15T KOA *)
*) The power supply capacity should be designed to be more than the fusing current.
MITSUBISHI Confidential (7/22) AA057VF02_02_00
5. INTERFACE PIN CONNECTION
(1) CN 1(Interface Signal)
Used connector: 08-6260-033-340-829+ (KYOCERA ELCO)
Pin No. Symbol Function
1 GND
2 DCLK Clock signal for sampling catch data signal
3 HD Horizontal sync signal *1)
4 VD Vertical sync signal *1)
5 GND
6 R0 Red data signal(L SB)
7 R1 Red d ata s ignal
8 R2 Red d ata s ignal
9 R3 Red d ata s ignal
10 R4 Red data signal
11 R5 Red data signal(MSB)
12 GND
13 G0 Green data signal(LSB)
14 G1 Green data signal
15 G2 Green data signal
16 G3 Green data signal
17 G4 Green data signal
18 G5 Green data signal(MSB)
19 GND
20 B0 Blue data signal(LSB)
21 B1 Blue data signal
22 B2 Blue data signal
23 B3 Blue data signal
24 B4 Blue data signal
25 B5 Blue data signal(MSB)
26 GND
27 DENA Data enable signal (to settle the viewing area)
28 VCC 3. 3 V Powe r Sup ply
29 VCC 3. 3 V Powe r Sup ply
30 R/L Right/Left s ca nning direction (Low =Normal, High=Right/Left Reverse)
31 U/D Up/Down scanning direction (Low=Normal, High=Up/Down Reverse)
32 NC This pin should be open.
33 GND GND
*1) HD and VD are not being used for timing control.
*2) Metal frame is connected to signal GND.
MITSUBISHI Confidential (8/22) AA057VF02_02_00
(2) CN 2 (Backlight)
Backlight-side connector: 08-6260-018-340-829+ (KYOCERA ELCO)
Pin No. Symbol Function
1 VL
2 VL
3 VL
4 VL Lamp Voltage
5 VL
6 VL
7 VL
8 VL
9 BLEN Backlight ON-OFF (High:ON, Low:OFF)
10 VBRT Light Dimming Cont rol Vo lt age
11 GND
12 GND
13 GND
14 GND GND
15 GND
16 GND
17 GND
18 GND
MITSUBISHI Confidential (9/22) AA057VF02_02_00
6. INTERFACE TIMING
(1) T iming Specifications
ITEM SYMBOL MIN. TYP. MAX. UNIT
Frequency fCLK 20 25 30 MHz
Period tCLK 33.3 40 50 ns
Low Width tWCL 10 -- -- ns
DCLK
High Width tWCH 10 -- -- ns
Set up time tDS 4 -- -- ns
DATA(R,G,B),
DENA Hold time tDH 4 -- -- ns
Active TimetHA 640 640 640 tCLK
Blank ing Time tHB 20 160 -- tCLK
Frequency fH 27 31.5 38 kHz
Horizontal
Period tH 26.3 31.7 37.0 µs
Active TimetVA 480 480 480 tH
Blank ing Time tVB 4 45 -- tH
Frequency fV 55 60 70 Hz
DENA
Vertical
Period tV 14.3 16.7 18.2 ms
[Note]
1) DAT A is latched at fall edge of DCLK in this specification.
2) DENA (Data Enable) should always be positive polarity as shown in the timing specification.
3) DCLK should appear during all invalid period.
4) In case of blanking time fluctuation, plea se satisfy following condition.
tVBn > tVBn-1 − 3(tH)
MITSUBISHI Confidential (10/22) AA057VF02_02_00
(2) Timing Cha rt
a. Pixel Timing Chart
2.0
V
0.8
V
tWCH t
WCL
tCLK
tDＳ tDＨ
DCLK
DATA(R,G,B),
DENA 0.8
V
2.0
V
b. Hori z ont a l T imi n g Char t
DCLK
DATA
(R,G,B)
DENA
1 2 479 480 3In valid Dat a In valid Dat a
tVB
LINE DATA
DENA
t
V
A
c. Ver tical Timing C har t
1 2 639 640 3Invalid D ata Invalid D ata
tHB
Fi rst Data Last Data
tH=1/fH
t
V
=1/f
V
tHA
MITSUBISHI Confidential (11/22) AA057VF02_02_00
(3) Co lo r Data Assignment INPUT DATA
R DATA G DATA B DATA
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
COLOR
MSB LSB MSB LSB MSB LSB
BLACK 0 0 0 0 000000000 0 0 000
RED(63) 1 1 1 1 110000000 0 0 000
GREEN(63) 0 0 0 0 001111110 0 0 000
BLUE(63) 0 0 0 0 000000001 1 1 111
CYAN 0 0 0 0 001111111 1 1 111
MAGENTA 1 1 1 1 110000001 1 1 111
YELLOW 1 1 1 1 111111110 0 0 000
BASIC
COLOR
WHITE 1 1 1 1 111111111 1 1 111
RED(1) 0 0 0 0 010000000 0 0 000
RED(2) 0 0 0 0 100000000 0 0 000
RED(62) 1 1 1 1 100000000 0 0 000
RED
RED(63) 1 1 1 1 110000000 0 0 000
GREEN(1) 0 0 0 0 000000010 0 0 000
GREEN(2) 0 0 0 0 000000100 0 0 000
GREEN(62) 0 0 0 0 001111100 0 0 000
GREEN
GREEN(63) 0 0 0 0 001111110 0 0 000
BLUE(1) 0 0 0 0 000000000 0 0 001
BLUE(2) 0 0 0 0 000000000 0 0 010
BLUE(62) 0 0 0 0 000000001 1 1 110
BLUE
BLUE(63) 0 0 0 0 000000001 1 1 111
[Note]
1) Definition of gray scale
Color (n) --- n ind icates gray scale level.
Higher n means brighter level.
2) Data 1:High, 0: Low
MITSUBISHI Confidential (12/22) AA057VF02_02_00
(4) Display Posi tion and Scan Di rection
D(X,Y) shows the data number of input signal for LCD panel signal processing PCB.
D(1,1) D(640,1)
D(1,480) D(640,480)
D(640,1) D(1,1)
D(640,480) D(1,480)
D(1,480) D(640,480)
D(1,1) D(640,1)
D(640,480) D(1,480)
D(640,1) D(1,1)
R/L=High, U/D= Low
R/L=High, U/D=High
R/L=Low, U/D=Low
R/L=Low, U/D=High
MITSUBISHI Confidential (13/22) AA057VF02_02_00
7. BLOCK DIAGRAM
Timing
Converter
Driver(source)
TFT-LCD
Driver(gate)
G1
G2
G480
Timing signal
Disp lay data
S1
S2
S1919
S1920
Power
I/F Connector
Power
Supply
Circuit
CN1
Brightness/
ON/OFF
Control
Power
I/F Connector
CN2
Power
Supply
Circuit
LED B/L
MITSUBISHI Confidential (14/22) AA057VF02_02_00
8. MECHA NICAL SPECIFICATIONS
(1) Front Side
(Unit:mm)
MITSUBISHI Confidential (15/22) AA057VF02_02_00
(2) Rear Side
(Unit:mm)
MITSUBISHI Confidential (16/22) AA057VF02_02_00
9. OPTICAL CHA RACTERISTICS
Ta=25°C, VCC=3.3 V, VL=5.0V, Input Signals: Typ . Values show n in Section 6
ITEM SYMBOL CONDITION MIN. TYP. MAX. UNIT Remarks
Contras t RatioCR θV=0°, θH=0° 390 600 -- -- *1)*2)*5)
Luminance Lw θV=0°, θH=0° 320 400 -- cd/m2 *1)*5)
Luminance Uniformity∆Lw θV=0°, θH=0° -- -- 30 % *1)*3)*5)
tr θV=0°, θH=0° -- 5 --
ms *1)*4)*5)
Response Timetf θV=0°, θH=0° -- 20 --
ms *1)*4)*5)
Horizontal θH −65∼65 −80∼80 -- ° *1)*5)
Viewing
Angle Vertical θV CR ≥ 10 −50∼65 −60∼80 -- ° *1)*5)
Image Sticking tis 2 h -- -- 2 s *6)
Red Rx 0.553 0.593 0.633
Ry 0.308 0.348 0.388
Color Green Gx 0.301 0.341 0.381
Coordinates Gy θV=0°, θH=0° 0.545 0.585 0.625 -- *1)*5)
Blue Bx 0.114 0.154 0.194
By 0.092 0.132 0.172
White Wx 0.273 0.313 0.353
Wy 0.289 0.329 0.369
[Note]
These items are measured using CS1000(MINOLTA) for color coordinates, EZContrast(ELDIM) for
viewing angle and CS1000 or BM-5A(TOPCON) for others under the dark room condition (no
ambient light) after more than 30 minutes from turning on the backlight unless noted.
Condition: IF=90 mA
Measurement method for luminance and color coordinates is as follows.
θ (Field)
TFT-LCD module
Photodetector
Lumina nce : θ=2° (BM-5A)
Color coordinates : θ=1° (CS1000)
500 mm
The luminance is measured according to FLAT PANEL DISPLAY MEASUREMENTS STANDARD
(VESA Sta n dard).
MITSUBISHI Confidential (17/22) AA057VF02_02_00
*1) Measurement Point
Contrast Ratio, Lumina nce, Response Time , View ing Angle, Color Coordinates: Displa y Cent er
Lumina nce Uniformity: point 1∼5 shown in a figure below
1 2
5
3 4
(1, 1)
120
240
360
160 320 480
」
(640, 480)
*2) Definition of Contrast Ratio
CR=Luminance with all white pixels / L um inance with all black pixels
*3) Definition of Luminance Uniformity
∆Lw=[Lw(MAX)/Lw(MIN)-1] × 100
*4) Definition of Response Time
White
90%90%
10%10% Black tf
tr
Luminance
*5) Definition of Viewing Angle (θV, θH)
θH
Upper(+)
Lower(-)
Left (-) Right (+)
LCD panel
θV
Normal Axis
MITSUBISHI Confidential (18/22) AA057VF02_02_00
*6) Image Sticking
Continuously display the test pattern shown in the figure below for two-hours. Then display a
completely whit e screen. The previous image shall not persist more than two s e conds at 25 °C.
Black
Lines
White
Area
Cols 318-322
Rows 238-242
TEST PATTERN FOR IMAGE STICKING TEST
MITSUBISHI Confidential (19/22) AA057VF02_02_00
10. RELIABILITY TEST CONDITION
(1) Tempe rature a n d Humidity
ITEM CONDITIONS
HIGH TEMP ERATURE
HIGH HUMIDIT Y O PERATION 40°C, 90%RH, 240h
(No condensation)
HIGH TEMP ERATURE OPERATIO N 70°C, 240 h
LOW TEMPERATURE OPERATION −20°C, 240 h
HIGH TEMP ERATURE STORAGE 80°C, 240 h
LOW TEMPERATURE STORAGE −30°C, 240 h
THERMAL SHO CK (NON-OPERATION)BETWEEN −30°C(1 h) and 80°C(1 h),
100 CYCLES
(2) Shock & Vibration
ITEM CONDITIONS
SHOCK
(NON-OPERATION)
Shock level: 1470m/s2 (150G)
Waveform: half sinusoidal wave, 2ms
Number of shocks: one shock input in ea ch direction of three m u tually
pe rpendi cu lar axis for a tota l of six shock in puts
VIBRATION
(NON-OPERATION)
Vibration level: 9.8m/s2 (1.0G)
Waveform: sinusoidal
Frequency range: 5 to 500Hz
Frequency sweep rate: 0.5 octave /min
Duration: one sweep from 5 to 500 Hz in each of three mutually
pe rpendi cular a x i s(tot al 3 h o urs)
(3) Judgment st andard
The judgment of the above tests should be made as follow:
Pass: Normal display image, no damage of the display function. (ex. no line defect)
Partial trans formation of the module pa rts should be ignored.
Fa il: No displa y im age, damage of the disp lay function. (ex. line defect)
MITSUBISHI Confidential (20/22) AA057VF02_02_00
11. OTHER FEATURE
This LCD module complies with RoHS*) di rective.
*) RoHS: Restriction of the use of certain hazardous substances in electrical and electronic
equipment
MITSUBISHI Confidential (21/22) AA057VF02_02_00
12. HANDLING PRECAUTIONS FOR TFT-LCD MODULE
Please pay attention to the followings in handling TFT-LCD products;
(1) ASSEMBLY PRECAUTION
a. Please do not bending or wrenching LCD in assembling. And please do not drop, bend or twist
LCD m odule in handling.
b. Please de sign displa y housing in accordance w it h t h e follow ing guide lines.
(a) Housi n g case must be design ed car ef u ll y so as not to pu t str e sses on LC D all si des an d no t to
wrench module. The stresses may cause non-uniformity even if there is no non-uniformity
statically.
(b) Under high temperature environment, performance and life time of LED may heavily
shorten. When you design with our LCD product, please consider radiating heat and
ventilation for good heat m anagement.
(c) Keep sufficient clearance between LCD module back surface and housing when the LCD
module is mounted. Approximately 1.0mm of the clearance in the design is recommended
taking into account the tolerance of LCD module thickness and mounting structure height on
the housing.
(d) When some parts, such as, FPC cable and ferrite plate, are installed underneath the LCD
module, still sufficient clearance is required, suc h as 0.5mm. This clearance is, especially, to
be reconsidered when the additional pa rts are implemented for EMI countermeasure.
(e) Keep sufficient clearance between LCD module and the others parts, such as inverter and
speaker so as not to inter fac e the LCD modu le. Approximately 1.0mm of the clearance in the
de sign is recomme nded.
(f) To avoid local elevation/decrease of temperature, considering location of heating element,
heat release, thermal design should be done.
c. Please do not push or scratch LCD panel surface with anything hard. And do not soil LCD panel
surface by touching with bare hands . (Pola rizer film, surface of LCD panel is easy to be flawed.)
d. Please do not press any parts on the rear side such as source TCP, gate TCP, control circuit
board and FPCs during handling LCD module. If pressing rear part is unavoidable, handle the
LCD module with care not to damage them.
e. Please w ipe off LCD pa nel s urface with abs orbent cotton or soft cloth in case of it being soiled.
f. Pl ease wipe off drops of adhesives like saliva and water on LCD panel surface immediately. They
migh t damage t o cause pane l surface variat ion and color change.
g. Please do not take a LCD module to pieces and reconstruct it. Resolving and reconstructing mod-
ules may cause them not to work well.
h. Please do not touch metal frames with bare hands and soiled gl oves. A color change of the metal
frames can happen during a long preservation of soiled LCD modules.
i. Please handle m e t al frame ca refully becaus e ed ge of m e t al frame is very sharp .
j. Please connect the metal frame of LCD module to GND in order to minimize the effect of external
noise and EMI.
k. B e sure to connect the cables and th e connecters co rrectly.
(2) OPERATING PRECAUTIONS
a. Please be sure to turn off the power supply before connecting and disconnecting signal input
cable.
b. Please do n ot chang e variabl e resist ance se tting s in LC D modul e. They are adj usted to the mo st
suitable value. If they are changed, it might happen LCD does not satisfy the characteristics
specification.
c. The interface signal speed is very high. Please pay attention to transmission line design and
other high speed signal precautions to satisfy signal specification.
d. A condensation might happen on the surf ace and inside of LCD module in c ase of sudden change
of ambient temperature.
MITSUBISHI Confidential (22/22) AA057VF02_02_00
e. Please pay attention not to display the same pattern for very long time. Image might stick on
LCD. Even if image sticking happens, it may disap p ear as the operation time p roceeds.
f. Please ob ey the same safe instructions as ones being prepared for ordinary electronic products.
(3) PRECAUTIONS WITH ELECTROSTATICS
a. This LCD module use CMOS-IC on circuit board and TFT-LCD panel, and so it is easy to be
affected by electrostatics. Please be careful with electrostatics by the way of your body
connecting to the ground and so on.
b. Please remove protection film very slowly from the surface of LCD module to prevent from
electrostatics occurrence.
(4) STORAGE PRECAUTIONS
a. Plea se do not leave the LCDs in the environment of high humidity and high tem p era t ure such a s
60°C90%RH.
b. Plea se do not leave the LCDs in the environment of low temperature; below -30°C.
(5) SAFETY PRECAUTIONS
a. When you waste damaged or unnecessary LCDs, it is recommended to crush LCDs into pieces
and wa sh them off with solvents such as acetone and ethanol, w hich should la ter be burned.
b. If any liquid leaks out of a damaged glass cell and comes in contact with the hands, wash off
thoroughly with soap and water.
(6) OTHERS
a. A strong incident light into LCD panel may cause deterioration to polarizer film, color filter, and
other materials, which will degrade the quality of display characteristics. Please do not expose
LCD m odule under strong Ultraviolet rays for a long time.
b. Please pay attention to a panel side of LCD module not to contact with other materials in
preserving it alone.
c. For the packaging box, please pay attention to the followings;
(a) Packaging box and inner case for LCD are designed to protect the LCDs fr om the damage or
scratching during transportation. Please do not open except picking LCDs up from the box.
(b) Ple ase do not pile them up more than 8 boxes. ( They ar e not de signe d so.) An d please do no t
turn over.
(c) Please handle packaging box with care not to give them sudden shock and vibrations. And
also please do not throw them up.
(d) Packaging box and inner case for LCDs are made of cardboard. So please pay attention not to
get them wet. (Suc h like keeping them in hig h humidity or wet place can occur getting them
wet.)
